MPM-B2153B-MJ72AA

The MPM-B2153B-MJ72AA is a medium-inertia servo motor that belongs to the MP (Premium permanent magnet rotary servo motor) series and it has been manufactured and designed by Allen-Bradley. This kind of servo motors is intended for applications that require high-inertia load. The Allen-Bradley MPM-B2153B-MJ72AA medium-inertia servo motor operates with a voltage class of 400 Volts and a base speed of 1300 RPM. It has a multi-turn encoder classified as a high-resolution encoder and it does not possess brakes. This drive has a frame size of 215 millimeters with 3 magnet stacks.

The Allen-Bradley MPM-B2153B-MJ72AA medium-inertia servo motor features an IP65/67 housing with shaft key and no shaft seal. This housing allows the drive to be in contact with dust and dirt particles and liquids dropping, it also enables the drive to be exposed to partial immersions. If the optional shaft seal is installed, this drive can be exposed to water jets. The Allen-Bradley MPM-B2153B-MJ72AA medium-inertia servo motor must be grounded or included in a grounding system to prevent electromagnetic interference. Also, signal and power cables must be separated and filters can be used. Shielded and shorter cables are recommended on this kind of installations. Some recommended conditions for the Allen-Bradley MPM-B2153B-MJ72AA medium-inertia servo motor are an operating temperature of 0 to 40 degrees Celsius, a storage temperature of -30 to 70 degrees Celsius, a relative humidity range of 5 to 95% without condensing or dripping liquids and it is recommended to be installed or stored In non-corrosive atmospheres. In order to obtain the mentioned thermal rating, the motor should be installed on a surface with dimensions of 04.8 x 304.8 x 12.7 millimeters.