N-3406-2-K00AA

The Allen-Bradley N-3406-2-K00AA is an N-Series brushless servo motor. It must be connected to 230 Volts AC voltage. This motor cannot be directly connected to a power supply; it must be supplied over a compatible electronic drive system. It can be controlled in closed loop systems because it incorporates a 5000-line count encoder. This allows precise positioning of this motor.  The N-3406-2-K00AA is commonly used in applications requiring versatility and a high level of precision. It is built with a stainless steel shaft. The motor has a standard flange for connecting. It can achieve up to 6000 RPM. The moment of inertia for this motor’s rotor is 0.00008 kilogram-meters squared.

The key to proper installation is to keep the motor shaft aligned with the load connected to it. Keep the axial and radial loads within the specifications of the motor, and this device will run maintenance-free for at least 20,000 hours (estimated motor bearing life). To prevent electrical noise, users can apply AC power filtering by using AC line filters or isolated AC power transformers. The Allen-Bradley N-3406-2-K00AA should be kept in a dry and clean location. Users can store it at 0 to 50 degrees Celsius (32 to 122 degrees Fahrenheit) temperature ranges and its operating temperature range is 0 to 40 degrees Celsius (32 to 104 degrees Fahrenheit). The relative humidity range is 5 to 95%. The N-3406-2-K00AA servo motor has dimensions of 88.4 millimeters (3.48 inches) x 88.4 millimeters (3.48 inches) x 144.0 millimeters (5.67 inches) without the shaft. To achieve the IP65 protection rating, users can install the 0041-5065 shaft seal kit. The item’s approximated weight is 2.6 kilograms (5.7 pounds).