N-3412-2-H04AA

The N-3412-2-H04AA is an N-Series brushless servo motor that is manufactured by Allen-Bradley. This AC servo motor incorporates an encoder for providing feedback and for providing closed-loop control. It has an encoder with a 2000 line count. Users can connect this motor only to 230 Volts AC voltage generated from an electronic drive system. The N-3412-2-H04AA has 24 Volts DC brake embedded in it. It is a flange connectable device and it has a shaft made of stainless steel. This motor can perform with up to 6000 RPM speed and it has a 0.00015 kg-m2 rotor moment of inertia. The N-3412-2-H04AA is built with 4 poles. Make rigid connections of the motor load to the motor for ideal operation. This motor has high dynamic performance and it can cause the couplings to loosen or disconnect over time. Electromagnetic interference to the device can be omitted with AC power filtering (AC line filters and AC transformers). The brake installed on the device should not be used for machine safety (as a mechanical restraining device).

The Allen-Bradley N-3412-2-H04AA can be operated in environments with a relative humidity ranging from 5 to 95%, in a non-corrosive atmosphere. Its storage temperature range is 0 to 50 degrees Celsius (32 to 122 degrees Fahrenheit) and users can operate it at 0 to 40 degrees Celsius (32 to 104 degrees Fahrenheit) temperature ranges. The servo motor housing’s outer dimensions are 88.4 millimeters x 88.4 millimeters x 169.4 millimeters (3.48 inches x 3.48 inches x 6.67 inches). Use the 0041-5065 shaft seal kit to achieve an IP65 housing protection rating. Additional cables and connector kits can be ordered separately too. The motor’s approximated weight is 4.0 kilograms (8.0 pounds).