N-4220-2-H00AA

The N-4220-2-H00AA is a brushless servo motor that is manufactured and designed by Allen-Bradley. It belongs to the NEMA enclosure design series of brushless servo motors. The Allen-Bradley N-4220-2-H00AA brushless servo motor has a special design that protects it from external environmental threats, such as dust and other solid particles that could enter the unit and cause damages. The recommended conditions for the correct use of this servo motor are mainly to remain installed in a clean and dry location with an operating temperature range from 0 to 40 degrees Celsius (32 to 104 degrees Fahrenheit), a storage temperature range of 0 to 50 degrees Celsius (32 to 122 degrees Fahrenheit) and a relative humidity range of 5 to 95% non-condensing. It is important to note that this motor should be installed only in a non-corrosive atmosphere.

The Allen-Bradley N-4220-2-H00AA brushless servo motor operates with a voltage of 230 Volts AC, a maximum speed of 5000 RPM, and a friction torque of 0.73 N-m. A careful cable routing for the Allen-Bradley N-4220-2-H00AA brushless servo motor may improve the compatibility with the whole system. This can be achieved by keeping the cable at a considerable length, separating the motor and wiring cables, and keeping both ends of the encoder cable shield to prevent electromagnetic interference. If the motor is not properly grounded, high voltages may be present on the shield of power cables. Each power cable shield must be grounded. The approximate shipping weight of the Allen-Bradley N-4220-2-H00AA brushless servo motor is 6.9 kilograms (15.2 pounds). Its shafts are manufactured in 416 stainless steel.