TL-A410M-HJ32AA

Manufactured by Allen-Bradley, the TL-A410M-HJ32AA low-inertia servo motor belongs to the TL-series of servo motors. This low-inertia servo motor has a voltage rating of 200 Volts. This motor features a 115-millimeter frame size, a magnet stack length of 20, and a motor rated speed of 4500 RPM. It has a 2000-line per revolution incremental feedback encoder, a standard metric factory option, and an IP 65 enclosure type with a shaft key and rectangular connector cables measuring 300 millimeters in length. Some advanced features of the Allen-Bradley TL-A410M-HJ32AA low-inertia servo motor include an operating temperature range of 0 to 40 degrees Celsius, a -10 to 85 degrees Celsius storage temperature range, and a relative humidity range of 20 to 85%, non-condensing. It comes with an IP 65 rated optional shaft seal that protects the motor against water and dust. However, an extra shaft seal is required for the TL-series servo motor shaft at the front of the motor bearing when the shaft has a chance of coming into contact with a high volume of fluids or fine dust.

The whole Allen-Bradley TL-series of servo motors, including the TL-A410M-HJ32AA low-inertia servo motor, has a mounting flange that is used to bring the motor into line on the machine it is installed on. The TL-A410M-HJ32AA servo motor comes with approximate heatsink dimensions of 12 x 12 x 0.5 inches. During operation, this servo motor’s exterior rises in temperature to a temperature of up to 125 degrees Celsius. It is essential to take precautions to prevent any likely accidental contact with this hot motor surface by first locating the motor properly and then by routing cable connections away from the hot surface.