Y-1003-1-H00AA

The Allen-Bradley Y-1003-1-H00AA is a Y series brushless servo motor. It is designed to run at high speeds, for accurate position, velocity, and acceleration control of industrial machines motion. This is a Y-series model, making it smaller in size, but still very energy-efficient. The voltage applied to its windings is 115 Volts AC. This compact servo motor can support 0.35 N-m continuous torque, but it responds to disturbances with a torque much higher than this continuous ability. It comes without a break option, with an integrated optical encoder (2000 P/R resolution). The encoder supply voltage is 5 Volts DC. The Y-1003-1-H00AA servo motor is engineered to reach speeds up to 4500 RPM. This servo motor requires a sophisticated controller, a servo drive module designed specifically for use with servomotors. Allen-Bradley recommends using the 2093-AMP2, 2094-AMP5, 2098-DSD-005, 1398-DDM-009, or 1398-DDM-010 servo drive along with the Y-1003-1-H00AA servo motor.

The fast speed-changing behavior of the Y-1003-1-H00AA servo motor can cause couplings to loosen or slip during exploitation, so rigid, direct, and solid shaft connections, with no shaft misalignments during operation, are required. It is advisable to use a fan to blow air along this servo motor to maintain its performance and to protect operators (in case temperature reach 100 degrees Celsius). The Y-1003-1-H00AA is packed in an IP43 protection enclosure. Its shipping weight is 1.0 kilograms (2.3 pounds). Operating temperature conditions are 0 to 40 degrees Celsius (32 to 104 degrees Fahrenheit). The device has dimensions (measured without shaft) of 88 x 40 x 40 millimeters (3.46 x 1.58 x 1.58 inches). Its shaft diameter is 8 millimeters (0.31 inches).