Y-2012-2-H00AA

Allen Bradley has a variety of Y-series products, including the Y-2012-2-H00AA motor. Every character in the product number defines a specification; for this motor, ‘Y’ represents the series Designator, in this case, Y-series. The ‘2012’ set of numbers tells about the frame size of the motor, while ‘2’ refers to the Motor winding voltage designator which is this case a 230 Volt Drive input voltage. The ‘H’ character represents an Optical Encoder Line Count, which is here an Incremental encoder (2000 lines/revolution). The ‘00’ represents Options, which implies that the option provided is No brake (standard), and ‘AA’ is for Factory Designated Special Options, here, Standard (metric). The Y-2012-2-H00AA motor is available with 230 Volt windings which show the performance specification of the motor such as maximum speed, continuous and peak stall torque, and others. The maximum speed up to which Y-2012-2-H00AA can operate is 4500 RPM. It has a continuous stall torque of 1.4 N-m (12 pounds on an inch) whereas its peak stall torque is 3.8 N-m (33.7 pounds on an inch). The motor rated output of the Y-2012-2-H00AA is approximately 0.51 KW with a rotor inertia of 0.000026 kg-m2 (0.00023 lb-in-s2). This product of Y-series has an L10 bearing-fatigue life of 20,000 hours. The Y-2012-2-H00AA motor is capable of operating with radial and axial shaft loads that have a maximum load of 25 kilograms (55.125 pounds) and 10 kilograms (22.05 pounds) respectively. The maintenance of the motor is crucial; it is very important to be aware of the environmental conditions at which this motor should be maintained. This motor should be kept in a dry and clean area within an operating temperature ranges of 0 to 40 degrees Celsius.