140G-G2C3-C80

The 140G-G2C3-C80 circuit breaker is a thermal and magnetic circuit breaker that comes in the G Frame subseries of the 140 series of circuit breakers by Allen-Bradley. The Allen-Bradley 140G-G2C3-C80 thermal and magnetic circuit breaker works with a rating of 125 Amps. This current rating comes alongside a breaking capacity of 25 kA and a current range of 80 Amps. This breaker also uses 3 poles, and these perform a tripping action once the breaker detects an abnormal current condition. The Allen-Bradley 140G-G2C3-C80 thermal and magnetic circuit breaker is installed to protect equipment. Its main purpose is to stop the current flow into conduits before it can cause damage. This breaker is also used as a disconnecting means for control panels. Unlike fuses, this circuit breaker can be put back into operation immediately after clearing the fault that made it react. This means that the breaker can be used more than once.

It is recommended to install the Allen-Bradley 140G-G2C3-C80 thermal and magnetic circuit breaker in locations with the temperature ranges between 0 and 50 degrees Celsius to avoid interference when the breaker is performing current detection. There are several accessories for the Allen-Bradley 140G-G2C3-C80 thermal and magnetic circuit breaker that can improve the performance of the breaker and provide easy installation means, for example, mounting adapters. The mounting position will not affect the operation of the breaker. The characteristics and ratings of the breaker and the application it is going to be used for need to be compared before attempting to install the breaker. The current, capacity, and voltage ratings are the most important specifications to compare.