1606-XLP25A

The 1606-XLP25A power supply is a switched-mode power supply from Allen-Bradley. The power supply has a rated output power of 25 Watts while its rated output voltage stands at 5 Volts DC. The 1606-XLP25A power supply operates with a single-phase input voltage source. Additionally, the power supply belongs to the NEC (National Electrical Code) class 2 category. The NEC standards are used to define the installation of electric conductors and equipment in or on buildings. Note that standards defined in the NEC class 2 category also take care of the maximum voltage and current levels. The 1606-XLP25A power supply’s NEC class 2 classification gives it a lower cost and improves the flexibility of the machine system that it is part of.

Additionally, especially when the voltage level of the control circuit in a machine is shifted from 120 Volts AC to 24 Volts DC, using the 1606-XLP25A power supply or an NEC class 2 rated power supply is recommended. The 1606-XLP25A power supply measures 45 millimeters in width, 75 millimeters in height, and 91 millimeters in depth. The power supply supports the use of stranded wires which have a size of between 0.3 millimeters (squared) and 2.5 millimeters (squared). However, for solid wires, the 1606-XLP25A power supply accommodates a size ranging from 0.3 millimeters (squared) to 4 millimeters (squared). The Allen-Bradley 1606-XLP25A power supply features terminals on the upper side. The terminals have 2 positive ends and 2 negative ends. The power supply also features light-emitting diodes. As with any other kind of electrical equipment, the 1606-XLP25A power supply should be mounted and operated in an environment with adequate air circulation. Additionally, the environment should have an ambient temperature which does not exceed 70 degrees Celsius.