1715-A2A | Allen Bradley PLC 1715 Redundant I/O

1715-A2A

1715-A2A

Revisions: Ser A 
Description:

The 1715-A2A is a Bulletin 1715 Redundant I/O module 2-Slot Adapter Base Unit. This module has a 2-slot Adapter Base Unit Chassis. It supports 24 Modules with a Power Dissipation of 8 Watts Maximum. With a Shielded RJ45 Connector wire type at 2.5 millimeters squared, this module has dimensions of 224x84x30 millimeters and weighs 283 grams.

Rated 5 with 12 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Available Now

Submit RFQ for 1715-A2A

Add more parts to quote

Description:

The 1715-A2A is a Bulletin 1715 Redundant I/O module 2-Slot Adapter Base Unit. This module has a 2-slot Adapter Base Unit Chassis. It supports 24 Modules with a Power Dissipation of 8 Watts Maximum. With a Shielded RJ45 Connector wire type at 2.5 millimeters squared, this module has dimensions of 224x84x30 millimeters and weighs 283 grams.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: Ser A 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1715-A2A.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 5 with 12 reviews

    Technical Specifications for 1715-A2A

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1715-A2A
Product LineBulletin 1715 Redundant I/O module
Module Type2-Slot Adapter Base Unit
Chassis2-slot Adapter Base Unit
Wire Size2.5 millimeters squared
Wire TypeShielded RJ45 Connector
Dimensions224 x 84 x 30 millimeters
Weight283 grams
Modules Supported24
Power Dissipation8 Watts Maximum
NetworkEthernet/IP
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1715-A2A
Product LineBulletin 1715 Redundant I/O module
Module Type2-Slot Adapter Base Unit
Chassis2-slot Adapter Base Unit
Wire Size2.5 millimeters squared
Wire TypeShielded RJ45 Connector
Dimensions224 x 84 x 30 millimeters
Weight283 grams
Modules Supported24
Power Dissipation8 Watts Maximum
NetworkEthernet/IP
s

About 1715-A2A

The 1715-A2A is an Allen-Bradley/Rockwell Automation I/O system redundant adapter base for two 1715-AENTR devices. The 1715-AENTR is a redundant adapter module/Ethernet/IP adapter for the I/O system. The redundant Ethernet adapters are used across the entire system and on a common network that is fault-tolerant. A network like this is resilient and it can be used without any additional hardware components. Besides that, the 1715 redundant modules that are used with an adapter base such as the 1715-A2A are built with innovative and intelligent technologies that provide top-level diagnostics. The diagnostics features include monitoring of the health of the module and performing multiple samples of a single signal to warn about potential issues. These issues can arise from current irregularities, short circuits, and sudden rate-of-change or thresholds. The 1715-A2A adapter base for redundant I/O systems can be used for most critical applications since it is super flexible, and it has features that are not available with other I/O platforms.





The 1715 series adapters provide redundant I/O modules and Ethernet adapters that are made to be used in proper DLR topologies. The use of these adapters and integration into the system can be done without the usage of any other hardware and without the users knowing how to program it manually. This product is part of an exceptional product line (the Bulletin 1715 line) that offers redundant I/O platforms that are extremely easy to use. One of the main advantages of this platform over other similar products on the market is that it does not require any programming knowledge or additional hardware components in order to work perfectly. This 1715-A2A adapter base has 2 slots for modules and these modules can be configured with ease. With a single connection, the assembly intended for the termination will split the signal to both modules that are attached. Allen-Bradley offers duplex termination adapters, duplex input modules, and duplex output modules.



FAQ for 1715-A2A

Can the 1715-A2A work in DLR topologies?


Yes, the 1715-A2A can work in DLR topologies.

What network does the 1715-A2A use?


The 1715-A2A uses the Ethernet/IP network.

How many module slots does the 1715-A2A have?


The 1715-A2A has 2 module slots.

Is the 1715-A2A easy to operate?


Yes, the 1715-A2A is easy to operate.

Does the 1715-A2A need additional hardware to operate?


No, the 1715-A2A does not need additional hardware to operate.

How many connections does the 1715-A2A need to operate?


The 1715-A2A needs only 1 connection to operate.

Repair Services for 1715-A2A

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1715-A2A. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for 1715-A2A

Please refer to the manual for more information about the 1715-A2A such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1715-A2A Ser A
1715-A2A/A, Series A, Rev A Request Quote
Common misspellings:
  • l715-A2A
  • 17l5-A2A
  • 1715A2A

Dimensions For 1715-A2A

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1715-A2A

Resolutions For 1715-A2A

About

Technical Specifications for 1715-A2A

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1715-A2A
Product LineBulletin 1715 Redundant I/O module
Module Type2-Slot Adapter Base Unit
Chassis2-slot Adapter Base Unit
Wire Size2.5 millimeters squared
Wire TypeShielded RJ45 Connector
Dimensions224 x 84 x 30 millimeters
Weight283 grams
Modules Supported24
Power Dissipation8 Watts Maximum
NetworkEthernet/IP
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1715-A2A
Product LineBulletin 1715 Redundant I/O module
Module Type2-Slot Adapter Base Unit
Chassis2-slot Adapter Base Unit
Wire Size2.5 millimeters squared
Wire TypeShielded RJ45 Connector
Dimensions224 x 84 x 30 millimeters
Weight283 grams
Modules Supported24
Power Dissipation8 Watts Maximum
NetworkEthernet/IP

About 1715-A2A

The 1715-A2A is an Allen-Bradley/Rockwell Automation I/O system redundant adapter base for two 1715-AENTR devices. The 1715-AENTR is a redundant adapter module/Ethernet/IP adapter for the I/O system. The redundant Ethernet adapters are used across the entire system and on a common network that is fault-tolerant. A network like this is resilient and it can be used without any additional hardware components. Besides that, the 1715 redundant modules that are used with an adapter base such as the 1715-A2A are built with innovative and intelligent technologies that provide top-level diagnostics. The diagnostics features include monitoring of the health of the module and performing multiple samples of a single signal to warn about potential issues. These issues can arise from current irregularities, short circuits, and sudden rate-of-change or thresholds. The 1715-A2A adapter base for redundant I/O systems can be used for most critical applications since it is super flexible, and it has features that are not available with other I/O platforms.





The 1715 series adapters provide redundant I/O modules and Ethernet adapters that are made to be used in proper DLR topologies. The use of these adapters and integration into the system can be done without the usage of any other hardware and without the users knowing how to program it manually. This product is part of an exceptional product line (the Bulletin 1715 line) that offers redundant I/O platforms that are extremely easy to use. One of the main advantages of this platform over other similar products on the market is that it does not require any programming knowledge or additional hardware components in order to work perfectly. This 1715-A2A adapter base has 2 slots for modules and these modules can be configured with ease. With a single connection, the assembly intended for the termination will split the signal to both modules that are attached. Allen-Bradley offers duplex termination adapters, duplex input modules, and duplex output modules.



FAQ for 1715-A2A

Can the 1715-A2A work in DLR topologies?


Yes, the 1715-A2A can work in DLR topologies.

What network does the 1715-A2A use?


The 1715-A2A uses the Ethernet/IP network.

How many module slots does the 1715-A2A have?


The 1715-A2A has 2 module slots.

Is the 1715-A2A easy to operate?


Yes, the 1715-A2A is easy to operate.

Does the 1715-A2A need additional hardware to operate?


No, the 1715-A2A does not need additional hardware to operate.

How many connections does the 1715-A2A need to operate?


The 1715-A2A needs only 1 connection to operate.

Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1715-A2A. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1715-A2A. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the 1715-A2A such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1715-A2A Ser A
1715-A2A/A, Series A, Rev A Request Quote

Common misspellings:
  • l715-A2A
  • 17l5-A2A
  • 1715A2A
PDF