1715-TADOF8

The 1715-TADOF8 is a ControlLogix module. It is a duplex redundant I/O termination assembly. Allen-Bradley is the sole manufacturer for this module. It runs with a maximum voltage of 32 Volts DC and it has a current rating of 24 milliamps. The device comes in a compact enclosure which makes it possible to install it in a small space. It has dimensions of 6.5 inches in height, 1.625 inches in width, and 4.625 inches in depth. The module has a shielded wire rated at 22/16 AWG and the wire has dimensions of 132 x 84 millimeters. The 1715-TADOF8 has a screw torque of 0.5 N-m. It dissipates a maximum of 3.6 Watts of power. The module belongs to the 1715 Bulletin series of I/O modules. The module has 8 channels and the backplane current is 0 to 24 milliamps per channel. It has an isolation voltage rated at 50 Volts continuous. The module needs a relatively humid environment for both storage and operation.

It comes inside an open enclosure and the enclosure is IP20 rated. It does not have any protection against liquids, and special precautions should be taken during the handling of the module to avoid liquids. RFI suppression is present on this module. The minimum operating temperature for this device is -25 degrees Celsius and the maximum operating temperature is 70 degrees Celsius. The users can mount the module while using a DIN rail. It has also been certified with various ratings like the GOST, KC, C/US, and UL standards which stand for different operating standards in different countries. The 1715-TADOF8 has a surge transient immunity of +/- 1 KV line-line ports and +/- line-earth signal ports. During the installation of the module, the environment should be cleared of all electrical discharges and electromagnetic interferences. Proper air ventilation should be maintained around it for better airflow.