1715-TASIF16 | Allen Bradley PLC 1715 Redundant I/O

1715-TASIF16

1715-TASIF16

Revisions: Ser A 
Description:

The 1715-TASIF16 is a Bulletin 1715 Redundant I/O module Termination Assembly - Analog Input Simplex. This module has a Screw Torque of 0.5 N-m. It supports the 1715-IF16 module and has a Power Dissipation of 4 Watts Maximum. It also supports a Wire Type of 22 to 16 AWG with Dimensions of 132 x 42 millimeters and a weight of 133 grams.

Rated 4.9 with 6 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Available Now

Submit RFQ for 1715-TASIF16

Add more parts to quote

Description:

The 1715-TASIF16 is a Bulletin 1715 Redundant I/O module Termination Assembly - Analog Input Simplex. This module has a Screw Torque of 0.5 N-m. It supports the 1715-IF16 module and has a Power Dissipation of 4 Watts Maximum. It also supports a Wire Type of 22 to 16 AWG with Dimensions of 132 x 42 millimeters and a weight of 133 grams.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: Ser A 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1715-TASIF16.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.9 with 6 reviews

    Technical Specifications for 1715-TASIF16

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1715-TASIF16
Product LineBulletin 1715 Redundant I/O module
Module TypeTermination Assembly - Analog Input Simplex
Screw Torque0.5 N-m
Modules supported1715-IF16
Power Dissipation4 Watts Maximum
Wire Size22 to 16 AWG
Dimensions132 x 42 millimeters
Weight133 grams
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1715-TASIF16
Product LineBulletin 1715 Redundant I/O module
Module TypeTermination Assembly - Analog Input Simplex
Screw Torque0.5 N-m
Modules supported1715-IF16
Power Dissipation4 Watts Maximum
Wire Size22 to 16 AWG
Dimensions132 x 42 millimeters
Weight133 grams
s

About 1715-TASIF16

The 1715-TASIF16 is a redundant I/O termination assembly module. The module fits into a small installation area. The device has an open enclosure with the IP20 rating. The IP20 rating indicates that the device is not water-resistant. The device should be kept inside a shielded bag when it is not in use. The power dissipation in this type of I/O termination assembly is 4 Watts and the field loop dissipation is a maximum of 0.075 Watts per field loop. The 1715-IF16 module is also supported by this module. This 16-channel module has basic insulation from I/O ports to the backplane but no insulation is present in between the individual I/O ports. The 1715-TASIF16 is enabled with an RFI suppression device. The connecting cables used in this module are made of stranded copper wire and it weighs only 133 grams.





The 1715-TASIF16 module can be mounted using a DIN rail. It can withstand a maximum temperature of 158 degrees Fahrenheit during its normal operation. A 95% humid environment is the maximum non-condensing humidity level for this module. The terminal assembly module is fitted and tested at 500 Volts AC for 60 seconds. The temperature required to run this assembly ranges from -13 degrees Celsius to 158 degrees Celsius. The 1715-TASIF16 has a screw torque rating of 0.5 N-m. It has an input resolution of 0.0039 milliamps/cnt. This terminal assembly module has been certified with the UL, CE, C-Tick, Ex, and KC standards. These certifications ensure that the industrial safety and environmental requirements in different regions are all met. It also meets multiple industrial emission standards. For communication purposes, it comes with a shielded RJ45 connector. The device should be properly grounded before installation. The airflow should be enhanced with good ventilation and the environment should be free from corrosive materials, dirt, and oil.



FAQ for 1715-TASIF16

Can the 1715-TASIF16 be mounted on a DIN rail?


Yes, the 1715-TASIF16 can be mounted on a DIN rail.

How many channels does the 1715-TASIF16 have?


The 1715-TASIF16 has 16 channels.

Is the 1715-TASIF16 CE certified?


Yes, the 1715-TASIF16 is CE certified.

Does the 1715-TASIF16 use copper wire?


Yes, the 1715-TASIF16 uses copper wire.

Repair Services for 1715-TASIF16

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1715-TASIF16. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for 1715-TASIF16

Please refer to the manual for more information about the 1715-TASIF16 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1715-TASIF16 Ser A
1715-TASIF16/A, Series A, Rev A Request Quote
Common misspellings:
  • l715-TASIF16
  • 17l5-TASIF16
  • 1715-TASIFl6
  • 1715TASIF16

Dimensions For 1715-TASIF16

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1715-TASIF16

Resolutions For 1715-TASIF16

About

Technical Specifications for 1715-TASIF16

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1715-TASIF16
Product LineBulletin 1715 Redundant I/O module
Module TypeTermination Assembly - Analog Input Simplex
Screw Torque0.5 N-m
Modules supported1715-IF16
Power Dissipation4 Watts Maximum
Wire Size22 to 16 AWG
Dimensions132 x 42 millimeters
Weight133 grams
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1715-TASIF16
Product LineBulletin 1715 Redundant I/O module
Module TypeTermination Assembly - Analog Input Simplex
Screw Torque0.5 N-m
Modules supported1715-IF16
Power Dissipation4 Watts Maximum
Wire Size22 to 16 AWG
Dimensions132 x 42 millimeters
Weight133 grams

About 1715-TASIF16

The 1715-TASIF16 is a redundant I/O termination assembly module. The module fits into a small installation area. The device has an open enclosure with the IP20 rating. The IP20 rating indicates that the device is not water-resistant. The device should be kept inside a shielded bag when it is not in use. The power dissipation in this type of I/O termination assembly is 4 Watts and the field loop dissipation is a maximum of 0.075 Watts per field loop. The 1715-IF16 module is also supported by this module. This 16-channel module has basic insulation from I/O ports to the backplane but no insulation is present in between the individual I/O ports. The 1715-TASIF16 is enabled with an RFI suppression device. The connecting cables used in this module are made of stranded copper wire and it weighs only 133 grams.





The 1715-TASIF16 module can be mounted using a DIN rail. It can withstand a maximum temperature of 158 degrees Fahrenheit during its normal operation. A 95% humid environment is the maximum non-condensing humidity level for this module. The terminal assembly module is fitted and tested at 500 Volts AC for 60 seconds. The temperature required to run this assembly ranges from -13 degrees Celsius to 158 degrees Celsius. The 1715-TASIF16 has a screw torque rating of 0.5 N-m. It has an input resolution of 0.0039 milliamps/cnt. This terminal assembly module has been certified with the UL, CE, C-Tick, Ex, and KC standards. These certifications ensure that the industrial safety and environmental requirements in different regions are all met. It also meets multiple industrial emission standards. For communication purposes, it comes with a shielded RJ45 connector. The device should be properly grounded before installation. The airflow should be enhanced with good ventilation and the environment should be free from corrosive materials, dirt, and oil.



FAQ for 1715-TASIF16

Can the 1715-TASIF16 be mounted on a DIN rail?


Yes, the 1715-TASIF16 can be mounted on a DIN rail.

How many channels does the 1715-TASIF16 have?


The 1715-TASIF16 has 16 channels.

Is the 1715-TASIF16 CE certified?


Yes, the 1715-TASIF16 is CE certified.

Does the 1715-TASIF16 use copper wire?


Yes, the 1715-TASIF16 uses copper wire.

Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1715-TASIF16. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1715-TASIF16. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the 1715-TASIF16 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1715-TASIF16 Ser A
1715-TASIF16/A, Series A, Rev A Request Quote

Common misspellings:
  • l715-TASIF16
  • 17l5-TASIF16
  • 1715-TASIFl6
  • 1715TASIF16
PDF