Free UPS Ground on All Orders!
+1 (919) 205-4392
Allen Bradley 1760 Pico Controllers 1760-OW2
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All our products come with DO Supply's 2-year warranty.
Learn more

1760-OW2

|

The 1760-OW2 module is an Allen-Bradley expansion module that can be used with Pico controllers from the Allen-Bradley Bulletin 1760 product line. This expansion module is one of the smallest expansion modules that is available from the 1760 product line. It has 2 relay outputs and no inputs of any kind. The 1760-OW2 expansion module uses 24 Volts DC of rated line power. The 1760-OW2 expansion module connects to the Pico controller that it works with through an included device that is known as an expansion module connector.

Ships Tomorrow.
In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All our products come with DO Supply's 2-year warranty.
Learn more
  • We sell industrial automation parts backed by our 2-year DO Supply Warranty.

  • Same-day domestic and expedited international shipping with UPS, FedEx, DHL, and more.

  • AMEX, Visa, MasterCard, Discover, wire transfer, and more, plus flexible payment plans.

  • Repair and exchange services for all existing automation products.

  • Reseller Options

    Drop shipping, blind shipping, and account shipping with no extra fees.

Technical specifications for 1760-OW2

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1760-OW2
Product LinePico Expansion IO
DescriptionExpansion Module
Outputs(2) Relay Outputs
Product Lifecycle Status*Discontinued/Obsolete

* The Allen Bradley 1760-OW2 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1760-OW2 units instead of migration.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The 1760-OW2 is a pico expansion module designed and manufactured by Allen-Bradley under the standards of the 1760 series of pico controllers. This device is connected to the pico controller, which is an electronic control relay with built-in logic, timer, counter, and real-time functions. A pico expansion module is used to increase the module’s I/O capacity. The main parts of the Allen-Bradley 1760-OW2 pico expansion module are its incoming power, inputs, its write-on surface, its outputs, and its LED status lights. The Allen-Bradley 1760-OW2 pico expansion module has an output composed of two relays and a line power of 24 Volts DC. It is not necessary for the expansion module and the pico controller to have the exact voltage type. This expansion module is to be connected directly to the pico controller. To achieve this, it is fundamental that an electrical isolation of at least 400 Volts AC and a reinforced isolation of 240 Volts AC are provided between the pico and the expansion module, in order to provide a minimal level of protection against electrical shocks.

The installation of this unit is simple; once the Allen-Bradley 1760-OW2 pico expansion module is connected to a pico controller, they are installed in an enclosure or cabinet, in order to protect the power feed and terminals during operations. Once they have been connected together, a surge suppressor is required in order to protect and extend the operating life of the controller’s output contacts. The dimensions of the Allen-Bradley 1760-OW2 pico expansion module are 35.5 millimeters (1.4 inches) x 90 millimeters (3.55 inches) x 56.5 millimeters (2.08 inches), and it has an approximate weight of 70 grams.

Revision Part #Also known as
1760-OW2 Ser A1760-OW2/A, Series A, Rev A
Request a quote
Don't see your particular revision? Contact us now.

Testimonials

4.99 /5.0
Recommended
4.99 average / 903 reviews