1786-CTK - In Stock | Allen Bradley PLC 1786 Repeaters

1786-CTK

Rated 4.6 with 10 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

1786-CTK

Description: The Allen-Bradley 1786-CTK Coax Toolkit is a must-have for technicians involved in the installation, maintenance, and troubleshooting of ControlNet applications in any industrial system. It provides the users with the best tools needed to perform the best installation, helping them save installation time and to ensure high-quality cabling in the system.
In Stock Ships Today
Request a quote for 1786-CTK

Description:

The Allen-Bradley 1786-CTK Coax Toolkit is a must-have for technicians involved in the installation, maintenance, and troubleshooting of ControlNet applications in any industrial system. It provides the users with the best tools needed to perform the best installation, helping them save installation time and to ensure high-quality cabling in the system.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1786-CTK.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.6 with 10 reviews

    Technical Specifications for 1786-CTK

BrandAllen-Bradley / Rockwell Automation
Series1786 Repeaters
Part Number1786-CTK
Type of ComponentWiring Installation Toolkit
Compatible withControlNet coax wiring
Cable strip toolIncluded - comes with two blade cassettes - one for PVC and one for FEP
Terminating resistors and extra connectorsIncluded
Memory blade cartridgesTwo sets included
Memory blade holderIncluded
Calibration/flare holderIncluded
Heat GunMust be bought separately
BrandAllen-Bradley / Rockwell Automation
Series1786 Repeaters
Part Number1786-CTK
Type of ComponentWiring Installation Toolkit
Compatible withControlNet coax wiring
Cable strip toolIncluded - comes with two blade cassettes - one for PVC and one for FEP
Terminating resistors and extra connectorsIncluded
Memory blade cartridgesTwo sets included
Memory blade holderIncluded
Calibration/flare holderIncluded
Heat GunMust be bought separately
s

About 1786-CTK

The Allen-Bradley 1786-CTK toolkit is a Coax toolkit, a set of tools that are specifically designed and manufactured by Allen-Bradley in other to facilitate the ControlNet wiring installation process. This 1786-CTK Coax toolkit includes a cable strip tool, a memory blade holder and its cartridges, a calibration tool (also known as a flare tool), a crimp tool, and most importantly, a detailed guide for the deployment of the ControlNet Networks called "The ControlNet Coax Media Planning and Installation Guide, Allen-Bradley publication CNET-IN002." Properly trained technicians using the 1786-CTK Coax Toolkit and following the manufacturer’s guidelines for installation will guarantee the best possible future results on a ControlNet architecture system.



 



The main tool in the Allen-Bradley 1786-CTK toolkit is the cable strip tool, and it comes from the factory with two blade cassettes. One blade cassette is intended for use with the cable PVC material and the other one is intended for the FEP. The Allen-Bradley 1786-CTK Coax toolkit also contains additional terminating resistors and extra connectors, so that the technicians performing the installation can always have them readily available when needed. The memory blade cartridges come with 2 sets of memory blades as spare parts. A custom-designed knife is also included in the toolkit, and so are versatile and durable wire cutters. When installing the IP 67 rated connectors, a heat gun will be required (this tool is not supplied in the toolkit). Following all the application and installation guidelines that are detailed in the ControlNet Coax Media Planning and Installation Guide will prevent electrical noise from entering the controllers from external sources.



Repair Services for 1786-CTK

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1786-CTK. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 1786-CTK

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1786-CTK

Resolutions For 1786-CTK

About

Technical Specifications for 1786-CTK

BrandAllen-Bradley / Rockwell Automation
Series1786 Repeaters
Part Number1786-CTK
Type of ComponentWiring Installation Toolkit
Compatible withControlNet coax wiring
Cable strip toolIncluded - comes with two blade cassettes - one for PVC and one for FEP
Terminating resistors and extra connectorsIncluded
Memory blade cartridgesTwo sets included
Memory blade holderIncluded
Calibration/flare holderIncluded
Heat GunMust be bought separately
BrandAllen-Bradley / Rockwell Automation
Series1786 Repeaters
Part Number1786-CTK
Type of ComponentWiring Installation Toolkit
Compatible withControlNet coax wiring
Cable strip toolIncluded - comes with two blade cassettes - one for PVC and one for FEP
Terminating resistors and extra connectorsIncluded
Memory blade cartridgesTwo sets included
Memory blade holderIncluded
Calibration/flare holderIncluded
Heat GunMust be bought separately

About 1786-CTK

The Allen-Bradley 1786-CTK toolkit is a Coax toolkit, a set of tools that are specifically designed and manufactured by Allen-Bradley in other to facilitate the ControlNet wiring installation process. This 1786-CTK Coax toolkit includes a cable strip tool, a memory blade holder and its cartridges, a calibration tool (also known as a flare tool), a crimp tool, and most importantly, a detailed guide for the deployment of the ControlNet Networks called "The ControlNet Coax Media Planning and Installation Guide, Allen-Bradley publication CNET-IN002." Properly trained technicians using the 1786-CTK Coax Toolkit and following the manufacturer’s guidelines for installation will guarantee the best possible future results on a ControlNet architecture system.



 



The main tool in the Allen-Bradley 1786-CTK toolkit is the cable strip tool, and it comes from the factory with two blade cassettes. One blade cassette is intended for use with the cable PVC material and the other one is intended for the FEP. The Allen-Bradley 1786-CTK Coax toolkit also contains additional terminating resistors and extra connectors, so that the technicians performing the installation can always have them readily available when needed. The memory blade cartridges come with 2 sets of memory blades as spare parts. A custom-designed knife is also included in the toolkit, and so are versatile and durable wire cutters. When installing the IP 67 rated connectors, a heat gun will be required (this tool is not supplied in the toolkit). Following all the application and installation guidelines that are detailed in the ControlNet Coax Media Planning and Installation Guide will prevent electrical noise from entering the controllers from external sources.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1786-CTK. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1786-CTK. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF