Product image is representative; revision or series may vary. Contact us to request a specific version.
1788-ENBT
The Allen-Bradley 1788-ENBT is an Ethernet daughtercard. This module is installed to a FlexLogix controller, enabling the controller to connect to Ethernet I/P networks. This controller supports 10 Mbps / 100 Mbps transmission speed and supports 32 CIP connections. This daughtercard has Network, Link, Utilization percent indicator.
-
We sell industrial automation parts backed by our free 2-Year DO Supply Warranty.
-
Same-day domestic and fast international shipping with UPS, FedEx, DHL, and more.
-
AMEX, Visa, MasterCard, Discover, wire transfer, net terms, and more.
-
Repairs and exchanges are available for all automation products.
- Reseller Options
Drop shipping, blind shipping, and account shipping with no extra fees.
Technical specifications for 1788-ENBT
| Manufacturer | Allen Bradley |
|---|---|
| Product Type | Ethernet I/P Daughtercard |
| Product Line | 1788 Linking Devices |
| Part Number | 1788-ENBT |
| UPC | 612598284221 |
| Weight | 0.19 lbs (0.09 kg) |
| Supported Protocol | Ethernet I/P |
| Supported Transmission rate | 10/100 Mbps; Full and Half duplex |
| Power Requirements | 5V dc @ 465mA |
| Power Consumption, max | 5 V dc, 2.33W |
| Thermal Dissipation, max | 8.0 BTU/hr |
| Isolation Voltage | Tested to withstand 500V ac for 60 seconds |
| Ethernet Conductors | 802.3 compliant - twisted pair |
| Ethernet Connector | RJ45 Category 5 |
| Operating Temperature | EC 60068-2-1 (Test Ad, Operating Cold), IEC 60068-2-2 (Test Bd, Operating Dry Heat), IEC 60068-2-14 (Test Nb, Operating Thermal Shock): 0...60 o C (32...140 o F) |
| Non-Operating Temperature | IEC 60068-2-1 (Test Ab, Un-packaged Nonoperating Cold), IEC 60068-2-2 (Test Bc, Un-packaged Nonoperating Dry Heat), IEC 60068-2-14 (Test Na, Un- packaged Nonoperating Thermal Shock): –40...85 o C |
| Compatible Controller | FlexLogix Controller |
| LED indicators | Network, Link and Utilization Percent indicators |
| Porduct Type | daughtercard |
| Network | Ethernet |
| Connector Port | RJ45 |
The Allen-Bradley 1788-ENBT is an Ethernet I/P communication module. This electronic card is specifically called an Ethernet I/P daughtercard that fits directly to a assigned slot of a FlexLogix controller. The 1788-ENBT has One (1) RJ45 physical port that supports interfacing to Ethernet I/P networks with transmission speed of 10 Mbps / 100 Mbps in half or full-duplex modes.
The 1788-ENBT has a small form factor. It is powered through the backplane and requires 5V dc @ 465mA with Power consumption of 5 V dc, 2.33W and thermal dissipation of 8.0 BTU/hr. It has an isolated voltage rating of 500V ac for 60 seconds.
The 1788-ENBT has supports direct connection or interfacing via a standard Ethernet switches. It has simple cable requirements thus, no cable scheduling and routing is needed. This communication port supports communication with Human Machine Interface (HMI), Supervisory Control and Data Acquisition (SCADA), converters, and gateways. It may also be utilized in sending and receiving messages to and from controllers in the network.
The 1788-ENBT is equipped with status LED indicators used for indicating the Network status, Link status and Utilization percent indicator.
The 1788-ENBT does not support removal and installation under power (RIUP). When installing this module, ensure that the FlexLogix controller is without power.
The daughtercard has Four (4) status LEDs such as link status LED, module status LED, the network status LED, and utilization percent LED. The 1788-ENBT has One (1) RJ45 port used for Ethernet interface. Before installing the daughtercard, ensure that the power is disconnected to avoid electrical arcs.
| Revision Part # | Also known as | |
|---|---|---|
| 1788-ENBT Ser A | 1788-ENBT/A, Series A, Rev A | |
| Don't see your particular revision? Contact us now. | ||
- 1788-EN8T
- 1788EN8T
- 1788ENBT
- 178B-ENBT
- 178BENBT
- 17B8-ENBT
- 17B8ENBT
- 17BB-ENBT
- 17BBENBT
- I788-ENBT
- I788ENBT
- I7BB-EN8T
- I7BBEN8T
Does the 1788-ENBT come with a warranty?
Yes, the 1788-ENBT includes a free 2-year DO Supply warranty. You can upgrade to a 3-year warranty at checkout for even more protection.
What are the supported transmission speeds by the 1788-ENBT?
Supported transmission speeds are 10 Mbps half duplex, 10 Mbps full duplex, 100 Mbps half duplex and 100 Mbps full duplex.
What is the recommended ethernet conductor and connector by this module?
Recommended Ethernet connector is 802.3 compliant - twisted pair and RJ45 Category 5.
What is the power supply requirement of this module?
This module requires 5V dc @ 465mA.
What are supported controllers by the 1788-ENBT?
The 1788-ENBT supports FlexLogix controller.
Does the 1788-ENBT support gigabit ethernet transmission speed?
No. Only 10 Mbps / 100 Mbps communication speed is supported.
What is the power supply requirement of the 1788-ENBT?
The 1788-ENBT requires 5V dc @ 465mA.
The Allen-Bradley 1788-ENBT is an Ethernet I/P daughtercard. This module may be installed to any device that supports installation of the Ethernet daughtercard. The 1788-ENBT support transmission speeds such as 10 Mbps half duplex, 10 Mbps full duplex, 100 Mbps half duplex and 100 Mbps full duplex.