803-B54RH | Allen Bradley PLC 803 Rotating Cam Limit Switches

803-B54RH

Rated 4.7 with 19 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

803-B54RH

Revisions: Ser A 
Description: The 803-B54RH cam switch is an Allen-Bradley/Rockwell Automation cam switch from the Bulletin 803 switch series. Its shaft extends to the right, it can rotate either clockwise or counterclockwise, and its maximum rated rotation speed is 150 RPM. The 803-B54RH cam switch comes with a Type 4 and 13 enclosure that can protect it from dust, oil, water, and other liquids. It can be used in repetitive heavy-duty industrial applications such as metal forming or injection molding applications. The 803-B54RH cam switch has 5 cam operators, 1 normally closed snap action contact, and 1 normally open snap action contact.
Available Now
Request a quote for 803-B54RH

Description: The 803-B54RH cam switch is an Allen-Bradley/Rockwell Automation cam switch from the Bulletin 803 switch series. Its shaft extends to the right, it can rotate either clockwise or counterclockwise, and its maximum rated rotation speed is 150 RPM. The 803-B54RH cam switch comes with a Type 4 and 13 enclosure that can protect it from dust, oil, water, and other liquids. It can be used in repetitive heavy-duty industrial applications such as metal forming or injection molding applications. The 803-B54RH cam switch has 5 cam operators, 1 normally closed snap action contact, and 1 normally open snap action contact.

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: Ser A 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 803-B54RH.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.7 with 19 reviews

    Technical Specifications for 803-B54RH

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.803-B54RH
Product TypeRotating Cam Limit Switch
Style of DeviceB
Circuits5
ModificationRight Hand Extension
Modification 2N/A
Modification 3N/A
Enclosure Type4
Amps10
ContactSnap Action 1 N.O.-1 N.C.
Cam Operators2-12 Independent
Max. Shaft Speed150 rpm
Cam Duration14°-346°
Extension StandardLeft Shaft
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.803-B54RH
Product TypeRotating Cam Limit Switch
Style of DeviceB
Circuits5
ModificationRight Hand Extension
Modification 2N/A
Modification 3N/A
Enclosure Type4
Amps10
ContactSnap Action 1 N.O.-1 N.C.
Cam Operators2-12 Independent
Max. Shaft Speed150 rpm
Cam Duration14°-346°
Extension StandardLeft Shaft
s

About 803-B54RH

The Allen-Bradley 803-B54RH rotating cam limit switch has 5 circuits and 2 cams. Its 1st cam is at the 5th position from the right-hand shaft extension and its second cam at the 4th position from the shaft. This rotating cam limit switch has a spring-loaded cam-roller assembly which is mounted to the contact base and this switch also comes with features like internal dwell and timing settings that the user can adjust, but which are only configurable when the device is not in use. Present on all Style B switches, including the 803-B54RH switch, is a 150 RPM maximum shaft speed, 1 10 Amp. snap action 1 N. O. (normally open) contact and 1 N. C. (normally closed) contact, and a minimum of 14 degrees and a maximum of 346 degrees for a cam duration.



Its operating temperature ranges from -30-66 degrees Celsius, while its non-operating temperature is from -30-93 degrees Celsius. The 803-B6RHRB switch also operates with typical shaft torques of 0.5 pounds on an inch with the cam roller in the valley, 7 pounds on an inch when the cam roller rides up on the cam ramp, and 3 pounds on an inch when the cam roller rides on the lobe. With a long product lifespan, this switch can be used for heavy-duty operations. This switch is specifically used for machines with repetitive operation cycles that correlate shaft rotation and machine motion. The 803-B6RHRB has a Type 4 and 13 enclosure, and it can rotate well in either direction when mounted on any plane. Its approximate shipping weight is 49 pounds or 22.2 kilograms.



Technical Description of 803-B54RH

The Allen-Bradley 803-B54RH has 5 Circuits, 10 Amps, and a 150 rpm Max. Shaft Speed. It also contains a Snap Action 1 N.O.-1 N.C. Contact and 2-12 Independent Cam Operators.

Repair Services for 803-B54RH

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 803-B54RH. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for 803-B54RH

Please refer to the manual for more information about the 803-B54RH such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
803-B54RH Ser A
803-B54RH/A, Series A, Rev A Request Quote
Common misspellings:
  • b03-B54RH
  • 8o3-B54RH
  • 803-854RH
  • 803-B5ARH
  • 803B54RH

Dimensions For 803-B54RH

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 803-B54RH

Resolutions For 803-B54RH

About

Technical Specifications for 803-B54RH

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.803-B54RH
Product TypeRotating Cam Limit Switch
Style of DeviceB
Circuits5
ModificationRight Hand Extension
Modification 2N/A
Modification 3N/A
Enclosure Type4
Amps10
ContactSnap Action 1 N.O.-1 N.C.
Cam Operators2-12 Independent
Max. Shaft Speed150 rpm
Cam Duration14°-346°
Extension StandardLeft Shaft
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.803-B54RH
Product TypeRotating Cam Limit Switch
Style of DeviceB
Circuits5
ModificationRight Hand Extension
Modification 2N/A
Modification 3N/A
Enclosure Type4
Amps10
ContactSnap Action 1 N.O.-1 N.C.
Cam Operators2-12 Independent
Max. Shaft Speed150 rpm
Cam Duration14°-346°
Extension StandardLeft Shaft

About 803-B54RH

The Allen-Bradley 803-B54RH rotating cam limit switch has 5 circuits and 2 cams. Its 1st cam is at the 5th position from the right-hand shaft extension and its second cam at the 4th position from the shaft. This rotating cam limit switch has a spring-loaded cam-roller assembly which is mounted to the contact base and this switch also comes with features like internal dwell and timing settings that the user can adjust, but which are only configurable when the device is not in use. Present on all Style B switches, including the 803-B54RH switch, is a 150 RPM maximum shaft speed, 1 10 Amp. snap action 1 N. O. (normally open) contact and 1 N. C. (normally closed) contact, and a minimum of 14 degrees and a maximum of 346 degrees for a cam duration.



Its operating temperature ranges from -30-66 degrees Celsius, while its non-operating temperature is from -30-93 degrees Celsius. The 803-B6RHRB switch also operates with typical shaft torques of 0.5 pounds on an inch with the cam roller in the valley, 7 pounds on an inch when the cam roller rides up on the cam ramp, and 3 pounds on an inch when the cam roller rides on the lobe. With a long product lifespan, this switch can be used for heavy-duty operations. This switch is specifically used for machines with repetitive operation cycles that correlate shaft rotation and machine motion. The 803-B6RHRB has a Type 4 and 13 enclosure, and it can rotate well in either direction when mounted on any plane. Its approximate shipping weight is 49 pounds or 22.2 kilograms.



Technical Description of 803-B54RH

The Allen-Bradley 803-B54RH has 5 Circuits, 10 Amps, and a 150 rpm Max. Shaft Speed. It also contains a Snap Action 1 N.O.-1 N.C. Contact and 2-12 Independent Cam Operators.
Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 803-B54RH. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 803-B54RH. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the 803-B54RH such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
803-B54RH Ser A
803-B54RH/A, Series A, Rev A Request Quote

Common misspellings:
  • b03-B54RH
  • 8o3-B54RH
  • 803-854RH
  • 803-B5ARH
  • 803B54RH
PDF