803-B64RA | Allen Bradley PLC 803 Rotating Cam Limit Switches

803-B64RA

Rated 5 with 10 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

803-B64RA

Revisions: Ser A 
Description: The Allen-Bradley 803-B64RA switch is a cam switch from the Bulletin 803 series. This cam switch features 6 cams that operate independently and a shaft that extends to the left. The 803-B64RA cam switch’s shaft can rotate clockwise or counterclockwise at speeds of up to 150 RPM. This switch is built with a speed reducer feature that has a gear ratio of 40 to 1. The 803-B64RA cam switch has 2 snap action contacts that include 1 NO or normally open contact and 1 NC or normally closed contact.
Available Now
Request a quote for 803-B64RA

Description: The Allen-Bradley 803-B64RA switch is a cam switch from the Bulletin 803 series. This cam switch features 6 cams that operate independently and a shaft that extends to the left. The 803-B64RA cam switch’s shaft can rotate clockwise or counterclockwise at speeds of up to 150 RPM. This switch is built with a speed reducer feature that has a gear ratio of 40 to 1. The 803-B64RA cam switch has 2 snap action contacts that include 1 NO or normally open contact and 1 NC or normally closed contact.

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: Ser A 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 803-B64RA.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 5 with 10 reviews

    Technical Specifications for 803-B64RA

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.803-B64RA
Product TypeRotating Cam Limit Switch
Style of DeviceB
Circuits6
ModificationN/A
Modification 2Speed Reducer
Modification 3N/A
Enclosure Type4
Amps10
ContactSnap Action 1 N.O.-1 N.C.
Cam Operators2-12 Independent
Max. Shaft Speed150 rpm
Cam Duration14°-346°
Extension StandardLeft Shaft
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.803-B64RA
Product TypeRotating Cam Limit Switch
Style of DeviceB
Circuits6
ModificationN/A
Modification 2Speed Reducer
Modification 3N/A
Enclosure Type4
Amps10
ContactSnap Action 1 N.O.-1 N.C.
Cam Operators2-12 Independent
Max. Shaft Speed150 rpm
Cam Duration14°-346°
Extension StandardLeft Shaft
s

About 803-B64RA

The Allen-Bradley 803-B64RA is a rotating cam limit switch that has 6 circuits and that also has an enclosure rating of Type 4 or Type 13. This switch comes with adjustable internal dwell time and timing, but users can only modify these settings when the device is not moving. It also comes with a spring-loaded cam-roller assembly that is mounted to the switch’s contact base. Also present on the 803-B64RA rotating cam limit switch are 10 Amp-rated snap action N. O. (normally open) and N. C. (normally closed) contacts, a cam duration with a minimum of 14 degrees and a maximum of 346 degrees, a 150 RPM maximum shaft speed, and a standard left shaft extension. The 803-B64RA switch is ideally used for machines that have operation cycles that are repetitive and that have the general machine motion correlated to the switch’s shaft rotation.



The typical shaft torques of this heavy-duty rotating cam limit switch are 3 pounds on an inch when the cam roller rides in the highest possible position or on the lobe, 0.5 pounds on an inch when the cam roller is in the lowest possible position or in the valley, and 7 pounds on an inch when the cam roller rides up the cam ramp from the valley to the lobe. The 803-B64RA rotating cam limit switch also has an operating temperature range of -30 to 66 degrees Celsius and a non-operating or storage temperature range of -30 to 93 degrees Celsius. It weighs approximately 53 pounds or 24 kilograms and users can mount this switch on any plane. The 803-B64RA switch has the capacity to rotate well in either direction (clockwise or counterclockwise).



Technical Description of 803-B64RA

The Allen-Bradley 803-B64RA has 6 Circuits, 10 Amps, and a 150 rpm Max. Shaft Speed. It also contains a Snap Action 1 N.O.-1 N.C. Contact and 2-12 Independent Cam Operators.

Repair Services for 803-B64RA

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 803-B64RA. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for 803-B64RA

Please refer to the manual for more information about the 803-B64RA such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
803-B64RA Ser A
803-B64RA/A, Series A, Rev A Request Quote
Common misspellings:
  • b03-B64RA
  • 8o3-B64RA
  • 803-864RA
  • 803-B6ARA
  • 803B64RA

Dimensions For 803-B64RA

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 803-B64RA

Resolutions For 803-B64RA

About

Technical Specifications for 803-B64RA

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.803-B64RA
Product TypeRotating Cam Limit Switch
Style of DeviceB
Circuits6
ModificationN/A
Modification 2Speed Reducer
Modification 3N/A
Enclosure Type4
Amps10
ContactSnap Action 1 N.O.-1 N.C.
Cam Operators2-12 Independent
Max. Shaft Speed150 rpm
Cam Duration14°-346°
Extension StandardLeft Shaft
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.803-B64RA
Product TypeRotating Cam Limit Switch
Style of DeviceB
Circuits6
ModificationN/A
Modification 2Speed Reducer
Modification 3N/A
Enclosure Type4
Amps10
ContactSnap Action 1 N.O.-1 N.C.
Cam Operators2-12 Independent
Max. Shaft Speed150 rpm
Cam Duration14°-346°
Extension StandardLeft Shaft

About 803-B64RA

The Allen-Bradley 803-B64RA is a rotating cam limit switch that has 6 circuits and that also has an enclosure rating of Type 4 or Type 13. This switch comes with adjustable internal dwell time and timing, but users can only modify these settings when the device is not moving. It also comes with a spring-loaded cam-roller assembly that is mounted to the switch’s contact base. Also present on the 803-B64RA rotating cam limit switch are 10 Amp-rated snap action N. O. (normally open) and N. C. (normally closed) contacts, a cam duration with a minimum of 14 degrees and a maximum of 346 degrees, a 150 RPM maximum shaft speed, and a standard left shaft extension. The 803-B64RA switch is ideally used for machines that have operation cycles that are repetitive and that have the general machine motion correlated to the switch’s shaft rotation.



The typical shaft torques of this heavy-duty rotating cam limit switch are 3 pounds on an inch when the cam roller rides in the highest possible position or on the lobe, 0.5 pounds on an inch when the cam roller is in the lowest possible position or in the valley, and 7 pounds on an inch when the cam roller rides up the cam ramp from the valley to the lobe. The 803-B64RA rotating cam limit switch also has an operating temperature range of -30 to 66 degrees Celsius and a non-operating or storage temperature range of -30 to 93 degrees Celsius. It weighs approximately 53 pounds or 24 kilograms and users can mount this switch on any plane. The 803-B64RA switch has the capacity to rotate well in either direction (clockwise or counterclockwise).



Technical Description of 803-B64RA

The Allen-Bradley 803-B64RA has 6 Circuits, 10 Amps, and a 150 rpm Max. Shaft Speed. It also contains a Snap Action 1 N.O.-1 N.C. Contact and 2-12 Independent Cam Operators.
Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 803-B64RA. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 803-B64RA. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the 803-B64RA such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
803-B64RA Ser A
803-B64RA/A, Series A, Rev A Request Quote

Common misspellings:
  • b03-B64RA
  • 8o3-B64RA
  • 803-864RA
  • 803-B6ARA
  • 803B64RA
PDF