803-B8XRHRF | Allen Bradley PLC 803 Rotating Cam Limit Switches

803-B8XRHRF

Rated 4.9 with 5 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

803-B8XRHRF

Revisions: Ser A 
Description: The 803-B8XRHRF cam switch is an Allen-Bradley/Rockwell Automation cam switch from the Bulletin 803 and Style B series. It comes with 8 cam operators which can all function independently of each other. The 803-B8XRHRF cam switch’s shaft can rotate at a maximum speed of 150 RPM in either direction and it has double extensions which extend it to the right and the left. One of its snap action contacts is NC or normally closed and its other snap action contact is NO or normally open. The 803-B8XRHRF cam switch features a special speed reducer device that has a gear ratio of 150 to 1.
Available Now
Request a quote for 803-B8XRHRF

Description: The 803-B8XRHRF cam switch is an Allen-Bradley/Rockwell Automation cam switch from the Bulletin 803 and Style B series. It comes with 8 cam operators which can all function independently of each other. The 803-B8XRHRF cam switch’s shaft can rotate at a maximum speed of 150 RPM in either direction and it has double extensions which extend it to the right and the left. One of its snap action contacts is NC or normally closed and its other snap action contact is NO or normally open. The 803-B8XRHRF cam switch features a special speed reducer device that has a gear ratio of 150 to 1.

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: Ser A 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 803-B8XRHRF.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.9 with 5 reviews

    Technical Specifications for 803-B8XRHRF

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.803-B8XRHRF
Product TypeRotating Cam Limit Switch
Style of DeviceB
Circuits8
ModificationRight Hand Extension
Modification 2Speed Reducer
Modification 3Double Shaft Extension
Enclosure Type1
Amps10
ContactSnap Action 1 N.O.-1 N.C.
Cam Operators2-12 Independent
Max. Shaft Speed150 rpm
Cam Duration14°-346°
Extension StandardLeft Shaft
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.803-B8XRHRF
Product TypeRotating Cam Limit Switch
Style of DeviceB
Circuits8
ModificationRight Hand Extension
Modification 2Speed Reducer
Modification 3Double Shaft Extension
Enclosure Type1
Amps10
ContactSnap Action 1 N.O.-1 N.C.
Cam Operators2-12 Independent
Max. Shaft Speed150 rpm
Cam Duration14°-346°
Extension StandardLeft Shaft
s

About 803-B8XRHRF

The Allen-Bradley 803-B8XRHRF is a rotating cam limit switch featuring a double shaft extension equipped with a right-hand shaft extension, 8 circuits, and a speed reducer that has a gear ratio of 150:1. It also comes with adjustable internal dwell time and timing settings, which the user can adjust when the machine is at a complete stop, and the machine is capable of rotating in either a clockwise or a counterclockwise direction without issue. The 803-B8XRHRF switch also has a 150 RPM maximum shaft speed, 10 Amp. snap action N. O. (normally open) and N. C. (normally closed) contacts, and 14 degrees minimum and 346 degrees maximum cam durations, respectively. Also installed on this switch is a spring-loaded cam-roller assembly that is mounted to the contact base.



A heavy-duty switch with a long operating lifespan, the 803-B8XRHRF rotating cam limit switch is typically used for machines that come with repetitive operation cycles with correlated main machine motion and shaft rotation. It has a Type 1 enclosure and it is able to be mounted on any plane at any angle, and it weighs approximately of 36 pounds or 16.3 kilograms. Its typical shaft torques are 0.5 pounds on an inch with the cam roller in the lowest position (valley,) 7 pounds on an inch when the cam roller rides up the cam ramp and 3 pounds on an inch when the cam roller rides in the highest position (lobe.) The 803-B8XRHRF switch also has a storage temperature between -30 and 93 degrees Celsius, as well as an operating temperature between -30 and 66 degrees Celsius.



Technical Description of 803-B8XRHRF

The Allen-Bradley 803-B8XRHRF has 8 Circuits, 10 Amps, and a 150 rpm Max. Shaft Speed. It also contains a Snap Action 1 N.O.-1 N.C. Contact and 2-12 Independent Cam Operators.

Repair Services for 803-B8XRHRF

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 803-B8XRHRF. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for 803-B8XRHRF

Please refer to the manual for more information about the 803-B8XRHRF such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
803-B8XRHRF Ser A
803-B8XRHRF/A, Series A, Rev A Request Quote
Common misspellings:
  • b03-B8XRHRF
  • 8o3-B8XRHRF
  • 803-88XRHRF
  • 803-BbXRHRF
  • 803B8XRHRF

Dimensions For 803-B8XRHRF

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 803-B8XRHRF

Resolutions For 803-B8XRHRF

About

Technical Specifications for 803-B8XRHRF

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.803-B8XRHRF
Product TypeRotating Cam Limit Switch
Style of DeviceB
Circuits8
ModificationRight Hand Extension
Modification 2Speed Reducer
Modification 3Double Shaft Extension
Enclosure Type1
Amps10
ContactSnap Action 1 N.O.-1 N.C.
Cam Operators2-12 Independent
Max. Shaft Speed150 rpm
Cam Duration14°-346°
Extension StandardLeft Shaft
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.803-B8XRHRF
Product TypeRotating Cam Limit Switch
Style of DeviceB
Circuits8
ModificationRight Hand Extension
Modification 2Speed Reducer
Modification 3Double Shaft Extension
Enclosure Type1
Amps10
ContactSnap Action 1 N.O.-1 N.C.
Cam Operators2-12 Independent
Max. Shaft Speed150 rpm
Cam Duration14°-346°
Extension StandardLeft Shaft

About 803-B8XRHRF

The Allen-Bradley 803-B8XRHRF is a rotating cam limit switch featuring a double shaft extension equipped with a right-hand shaft extension, 8 circuits, and a speed reducer that has a gear ratio of 150:1. It also comes with adjustable internal dwell time and timing settings, which the user can adjust when the machine is at a complete stop, and the machine is capable of rotating in either a clockwise or a counterclockwise direction without issue. The 803-B8XRHRF switch also has a 150 RPM maximum shaft speed, 10 Amp. snap action N. O. (normally open) and N. C. (normally closed) contacts, and 14 degrees minimum and 346 degrees maximum cam durations, respectively. Also installed on this switch is a spring-loaded cam-roller assembly that is mounted to the contact base.



A heavy-duty switch with a long operating lifespan, the 803-B8XRHRF rotating cam limit switch is typically used for machines that come with repetitive operation cycles with correlated main machine motion and shaft rotation. It has a Type 1 enclosure and it is able to be mounted on any plane at any angle, and it weighs approximately of 36 pounds or 16.3 kilograms. Its typical shaft torques are 0.5 pounds on an inch with the cam roller in the lowest position (valley,) 7 pounds on an inch when the cam roller rides up the cam ramp and 3 pounds on an inch when the cam roller rides in the highest position (lobe.) The 803-B8XRHRF switch also has a storage temperature between -30 and 93 degrees Celsius, as well as an operating temperature between -30 and 66 degrees Celsius.



Technical Description of 803-B8XRHRF

The Allen-Bradley 803-B8XRHRF has 8 Circuits, 10 Amps, and a 150 rpm Max. Shaft Speed. It also contains a Snap Action 1 N.O.-1 N.C. Contact and 2-12 Independent Cam Operators.
Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 803-B8XRHRF. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 803-B8XRHRF. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the 803-B8XRHRF such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
803-B8XRHRF Ser A
803-B8XRHRF/A, Series A, Rev A Request Quote

Common misspellings:
  • b03-B8XRHRF
  • 8o3-B8XRHRF
  • 803-88XRHRF
  • 803-BbXRHRF
  • 803B8XRHRF
PDF