DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Warranty: | 1 year DO Supply Warranty Included |
Shipping: | Worldwide shipping via UPS, DHL, and TNT |
Repairs: | We offer repair service for the 803-F512. |
Exchange: | Exchange credit for your defective unit available. |
Conditions: | We sell preowned surplus and refurbished parts. |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 803-F512 |
Product Type | Rotating Cam Limit Switch |
Style of Device | F |
Circuits | 5 |
Modification | N/A |
Modification 2 | N/A |
Modification 3 | N/A |
Enclosure Type | 1 and 13 |
Amps | 10 |
Contact | Snap Action 1 N.O.-1 N.C. |
Cam Operators | 2-12 Independent |
Max. Shaft Speed | 150 rpm |
Cam Duration | 12°-348° |
Extension Standard | Left Shaft |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 803-F512 |
Product Type | Rotating Cam Limit Switch |
Style of Device | F |
Circuits | 5 |
Modification | N/A |
Modification 2 | N/A |
Modification 3 | N/A |
Enclosure Type | 1 and 13 |
Amps | 10 |
Contact | Snap Action 1 N.O.-1 N.C. |
Cam Operators | 2-12 Independent |
Max. Shaft Speed | 150 rpm |
Cam Duration | 12°-348° |
Extension Standard | Left Shaft |
The 803-F512 is a 1980 rotating cam limit switch, manufactured by the Allen Bradley brand. Similarly to other Rotating Cam limit Switches, the 803-F512 comes with contacts, a fully functional circuit, an operative cam, and a rotating shaft. The cams are normally mounted on the rotating shaft. The 803-F512 switch activates contacts by utilizing the cam. This switch is used in devices such as punch presses, assembly and packing machines, and injection molding machines. Furthermore, it can also be used in the formation of steel and other heavy metals. The 803-F512 senses the motion of rotating appliances and initiates functions at different points of the appliance’s recurrent cycle. The 803-F512 also closes and opens contacts at various angles of device shaft rotation. The Rotating Cam Limit Switch comes with five circuits. Its rotating shaft can only reach a maximum of 150 revolutions per minute when in fact other rotating cam limit switches can reach a maximum of 400 RPM. The switch can accommodate 2 to 12 independent cam operators. The 803-F512 has snap action contacts rated 10A. It has contacts labeled 1, 2, 3 & 4. When the cam roller rides onto the lobe, two of those contacts (1 & 2) close and the remaining two, (3 and 4) open
The 803-F512 has a single shaft arrangement. The left shaft extension is the established arrangement for the switch. Additionally, the 803-F512 also has external dwell and timing adjustments. A screwdriver can make those adjustments when the device is in motion. Internally adjustable cams are available for the switch. The internally adjustable cams can be modified only when the switch’s shaft is blocked. This Rotating Cam Limit Switch is a NEMA Type 1 and 13 enclosure. The switch comes with a shipping weight of 13 pounds, which is approximately 5.9 kilograms. The 803-F512 also has dimensions that are in the range of 12.31 x 10.06 x 5.03 inches.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 803-F512. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Please refer to the manual for more information about the 803-F512 such as the wiring diagrams, data sheets and migration or obsolescence details.
Revision Part # | Also Known as | Availability |
803-F512 Ser A
|
803-F512/A, Series A, Rev A | Request Quote |
Size | |
Input Type | |
Panel Cutout Height | in mm |
Panel Cutout Width | in mm |
Terminal Height | in mm |
Terminal Width | in mm |
Terminal Overall Depth | in mm |
Terminal Mounted Depth | in mm |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 803-F512 |
Product Type | Rotating Cam Limit Switch |
Style of Device | F |
Circuits | 5 |
Modification | N/A |
Modification 2 | N/A |
Modification 3 | N/A |
Enclosure Type | 1 and 13 |
Amps | 10 |
Contact | Snap Action 1 N.O.-1 N.C. |
Cam Operators | 2-12 Independent |
Max. Shaft Speed | 150 rpm |
Cam Duration | 12°-348° |
Extension Standard | Left Shaft |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 803-F512 |
Product Type | Rotating Cam Limit Switch |
Style of Device | F |
Circuits | 5 |
Modification | N/A |
Modification 2 | N/A |
Modification 3 | N/A |
Enclosure Type | 1 and 13 |
Amps | 10 |
Contact | Snap Action 1 N.O.-1 N.C. |
Cam Operators | 2-12 Independent |
Max. Shaft Speed | 150 rpm |
Cam Duration | 12°-348° |
Extension Standard | Left Shaft |
The 803-F512 is a 1980 rotating cam limit switch, manufactured by the Allen Bradley brand. Similarly to other Rotating Cam limit Switches, the 803-F512 comes with contacts, a fully functional circuit, an operative cam, and a rotating shaft. The cams are normally mounted on the rotating shaft. The 803-F512 switch activates contacts by utilizing the cam. This switch is used in devices such as punch presses, assembly and packing machines, and injection molding machines. Furthermore, it can also be used in the formation of steel and other heavy metals. The 803-F512 senses the motion of rotating appliances and initiates functions at different points of the appliance’s recurrent cycle. The 803-F512 also closes and opens contacts at various angles of device shaft rotation. The Rotating Cam Limit Switch comes with five circuits. Its rotating shaft can only reach a maximum of 150 revolutions per minute when in fact other rotating cam limit switches can reach a maximum of 400 RPM. The switch can accommodate 2 to 12 independent cam operators. The 803-F512 has snap action contacts rated 10A. It has contacts labeled 1, 2, 3 & 4. When the cam roller rides onto the lobe, two of those contacts (1 & 2) close and the remaining two, (3 and 4) open
The 803-F512 has a single shaft arrangement. The left shaft extension is the established arrangement for the switch. Additionally, the 803-F512 also has external dwell and timing adjustments. A screwdriver can make those adjustments when the device is in motion. Internally adjustable cams are available for the switch. The internally adjustable cams can be modified only when the switch’s shaft is blocked. This Rotating Cam Limit Switch is a NEMA Type 1 and 13 enclosure. The switch comes with a shipping weight of 13 pounds, which is approximately 5.9 kilograms. The 803-F512 also has dimensions that are in the range of 12.31 x 10.06 x 5.03 inches.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 803-F512. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 803-F512. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Please refer to the manual for more information about the 803-F512 such as the wiring diagrams, data sheets and migration or obsolescence details.
Revision Part # | Also Known as | Availability |
803-F512 Ser A
|
803-F512/A, Series A, Rev A | Request Quote |