803-NK36 | Allen Bradley PLC 803 Rotating Cam Limit Switches

803-NK36

Rated 4.8 with 13 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

803-NK36

Revisions: Ser A 
Description: The 803-NK36 cam kit is a spare parts kit or renewal kit with 2 cams and mounting hardware for a single circuit. It has been designed and manufactured by Allen-Bradley/Rockwell Automation for use with switches from the Bulletin 803 Style P series. The 803-NK36 cam kit’s cams can be used for controlling a switch’s contacts by opening or closing them as needed. It also supports adjustable degrees of dwell when controlling a switch’s contacts. The 803-NK36 cam kit can be used at operating temperatures between -22 and 150 degrees Fahrenheit and it can be stored at temperatures between -22 and 200 degrees Fahrenheit.
Available Now
Request a quote for 803-NK36

Description: The 803-NK36 cam kit is a spare parts kit or renewal kit with 2 cams and mounting hardware for a single circuit. It has been designed and manufactured by Allen-Bradley/Rockwell Automation for use with switches from the Bulletin 803 Style P series. The 803-NK36 cam kit’s cams can be used for controlling a switch’s contacts by opening or closing them as needed. It also supports adjustable degrees of dwell when controlling a switch’s contacts. The 803-NK36 cam kit can be used at operating temperatures between -22 and 150 degrees Fahrenheit and it can be stored at temperatures between -22 and 200 degrees Fahrenheit.

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: Ser A 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 803-NK36.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.8 with 13 reviews

    Technical Specifications for 803-NK36

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.803-NK36
Product TypeCam for Style P
Adjustable Degrees of Dwell N.C. Contact Opens48-69°
Adjustable Degrees of Dwell N.O. Contact Remains Closed291-312°
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.803-NK36
Product TypeCam for Style P
Adjustable Degrees of Dwell N.C. Contact Opens48-69°
Adjustable Degrees of Dwell N.O. Contact Remains Closed291-312°
s

About 803-NK36

The 803-NK36 is a Bulletin 803 Cam Kit for Rotating Cam Limit Switch manufactured by Allen-Bradley. The 803-NK36 package includes two cams and mounting hardware for one circuit. The kit includes two moon-shaped pieces of the cam assembly (cam segments), three screws, three screw nuts, three spacer washers and instruction manual with technical data. This kit is used to form cam assembly for the rotating cam limit switch. These cam elements are designed to have high position part – lobe, and low position part - valley. The cam assembly operates contacts (the lobe pushes against the cam-roller assembly) inside the rotating cam limit switch while rotated along with a shaft on which it is mounted.



This device is coupled with industrial machines to detect their rotating movement and provide control feedback.To adjust timing (angular position), shift both cam elements along their slotted holes to the desired position. To adjust dwell (angular travel), fan-out the cam elements with respect to each other. When adjusted, cam elements should be locked with nuts. This assembly’s NC (Normally Closed) contact opens to 48 or 69 degrees, while the NO (Normally Open) contact remains closed from 291 to 312 degrees. Ensure that the cam element lobes overlap enough to provide continuous cam edge, in order to guard against unintended contact operation. Additionally, both cam elements should be pushed down and firmly seated against shaft assembly in order to avoid the unpredictable operation and/or possible damage to the rotating cam limit switch unit. The Allen-Bradley 803-NK36 reached its end of production on October 31, 2007



Technical Description of 803-NK36

The Allen-Bradley 803-A104X has a 48-69� Adjustable Degrees of Dwell N.C. Contact Opens and a 291-312� Adjustable Degrees of Dwell N.O. Contact Remains Closed.

Repair Services for 803-NK36

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 803-NK36. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for 803-NK36

Please refer to the manual for more information about the 803-NK36 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
803-NK36 Ser A
803-NK36/A, Series A, Rev A Request Quote
Common misspellings:
  • b03-NK36
  • 8o3-NK36
  • 803NK36

Dimensions For 803-NK36

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 803-NK36

Resolutions For 803-NK36

About

Technical Specifications for 803-NK36

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.803-NK36
Product TypeCam for Style P
Adjustable Degrees of Dwell N.C. Contact Opens48-69°
Adjustable Degrees of Dwell N.O. Contact Remains Closed291-312°
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.803-NK36
Product TypeCam for Style P
Adjustable Degrees of Dwell N.C. Contact Opens48-69°
Adjustable Degrees of Dwell N.O. Contact Remains Closed291-312°

About 803-NK36

The 803-NK36 is a Bulletin 803 Cam Kit for Rotating Cam Limit Switch manufactured by Allen-Bradley. The 803-NK36 package includes two cams and mounting hardware for one circuit. The kit includes two moon-shaped pieces of the cam assembly (cam segments), three screws, three screw nuts, three spacer washers and instruction manual with technical data. This kit is used to form cam assembly for the rotating cam limit switch. These cam elements are designed to have high position part – lobe, and low position part - valley. The cam assembly operates contacts (the lobe pushes against the cam-roller assembly) inside the rotating cam limit switch while rotated along with a shaft on which it is mounted.



This device is coupled with industrial machines to detect their rotating movement and provide control feedback.To adjust timing (angular position), shift both cam elements along their slotted holes to the desired position. To adjust dwell (angular travel), fan-out the cam elements with respect to each other. When adjusted, cam elements should be locked with nuts. This assembly’s NC (Normally Closed) contact opens to 48 or 69 degrees, while the NO (Normally Open) contact remains closed from 291 to 312 degrees. Ensure that the cam element lobes overlap enough to provide continuous cam edge, in order to guard against unintended contact operation. Additionally, both cam elements should be pushed down and firmly seated against shaft assembly in order to avoid the unpredictable operation and/or possible damage to the rotating cam limit switch unit. The Allen-Bradley 803-NK36 reached its end of production on October 31, 2007



Technical Description of 803-NK36

The Allen-Bradley 803-A104X has a 48-69� Adjustable Degrees of Dwell N.C. Contact Opens and a 291-312� Adjustable Degrees of Dwell N.O. Contact Remains Closed.
Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 803-NK36. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 803-NK36. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the 803-NK36 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
803-NK36 Ser A
803-NK36/A, Series A, Rev A Request Quote

Common misspellings:
  • b03-NK36
  • 8o3-NK36
  • 803NK36
PDF