803-P5X | Allen Bradley PLC 803 Rotating Cam Limit Switches

803-P5X

Rated 4.6 with 17 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

803-P5X

Revisions: Ser A 
Description: The 803-P5X rotating cam limit switch is an Allen-Bradley/Rockwell Automation Bulletin 803 series rotating cam limit switch. It is equipped with a high-speed shaft that has a double shaft extension. The 803-P5X rotating cam limit switch’s shaft can rotate at up to 400 RPM in either direction. There are 5 cams in this switch and they are all internally adjustable. The 803-P5X rotating cam limit switch supports a cam duration range from 11 to 349 degrees.
Available Now
Request a quote for 803-P5X

Description: The 803-P5X rotating cam limit switch is an Allen-Bradley/Rockwell Automation Bulletin 803 series rotating cam limit switch. It is equipped with a high-speed shaft that has a double shaft extension. The 803-P5X rotating cam limit switch’s shaft can rotate at up to 400 RPM in either direction. There are 5 cams in this switch and they are all internally adjustable. The 803-P5X rotating cam limit switch supports a cam duration range from 11 to 349 degrees.

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: Ser A 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 803-P5X.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.6 with 17 reviews

    Technical Specifications for 803-P5X

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.803-P5X
Product TypeRotating Cam Limit Switch
Style of DeviceP
Circuits5
ModificationDouble Shaft Extension
Modification 2N/A
Modification 3N/A
Enclosure Type1
Amps25
ContactN.C. Double Break
Cam Operators2-12 Independent
Max. Shaft Speed400 rpm
Cam Duration11°-349°
Extension StandardRight Shaft
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.803-P5X
Product TypeRotating Cam Limit Switch
Style of DeviceP
Circuits5
ModificationDouble Shaft Extension
Modification 2N/A
Modification 3N/A
Enclosure Type1
Amps25
ContactN.C. Double Break
Cam Operators2-12 Independent
Max. Shaft Speed400 rpm
Cam Duration11°-349°
Extension StandardRight Shaft
s

About 803-P5X

The Allen-Bradley 803-P5X is a Style “P” rotating cam limit switch that comes with a double shaft extension and with 5 circuits. This is a heavy-duty switch with a long product life expectancy that is ideal for use with machines with repetitive operation cycles with the mechanical motion and shaft rotation correlated to each other. Like other Style “P” switches, present on the 803-P5X switch is 11 degrees minimum and 349 degrees maximum for cam duration, a 400 RPM maximum shaft speed, and 25 Amp. NC or normally-closed double break contacts. The 803-P5X cam switch is also equipped with internal dwell and timing settings which are adjustable only when the device has been stopped and a spring-loaded cam-roller assembly are mounted to the contact base.



The operating temperature range of the 803-P5X Style “P” rotating cam limit switch ranges from -30 to 66 degrees Celsius, while its storage temperature range is from -30 to 93 degrees Celsius. This switch is protected from moisture and debris with a Type 1 enclosure and it can be mounted on any plane and still be capable of rotating well in either a counterclockwise or a clockwise direction. Its typical shaft torques are 0.5 pounds on an inch with the cam roller in the valley or lowest position, of 3  pounds on an inch when the cam roller rides on the lobe or the highest position, and one of 7 pounds on an inch when the cam roller rides up the cam ramp. The 803-P5X rotating cam limit switch also has an approximate weight of 6.4 kilograms or 14 pounds.



Technical Description of 803-P5X

The Allen-Bradley 803-P5X has 5 Circuits, 25 Amps, and a 400 rpm Max. Shaft Speed. It also contains a N.C. Double Break Contact and 2-12 Independent Cam Operators.

Repair Services for 803-P5X

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 803-P5X. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for 803-P5X

Please refer to the manual for more information about the 803-P5X such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
803-P5X Ser A
803-P5X/A, Series A, Rev A Request Quote
Common misspellings:
  • b03-P5X
  • 8o3-P5X
  • 803P5X

Dimensions For 803-P5X

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 803-P5X

Resolutions For 803-P5X

About

Technical Specifications for 803-P5X

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.803-P5X
Product TypeRotating Cam Limit Switch
Style of DeviceP
Circuits5
ModificationDouble Shaft Extension
Modification 2N/A
Modification 3N/A
Enclosure Type1
Amps25
ContactN.C. Double Break
Cam Operators2-12 Independent
Max. Shaft Speed400 rpm
Cam Duration11°-349°
Extension StandardRight Shaft
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.803-P5X
Product TypeRotating Cam Limit Switch
Style of DeviceP
Circuits5
ModificationDouble Shaft Extension
Modification 2N/A
Modification 3N/A
Enclosure Type1
Amps25
ContactN.C. Double Break
Cam Operators2-12 Independent
Max. Shaft Speed400 rpm
Cam Duration11°-349°
Extension StandardRight Shaft

About 803-P5X

The Allen-Bradley 803-P5X is a Style “P” rotating cam limit switch that comes with a double shaft extension and with 5 circuits. This is a heavy-duty switch with a long product life expectancy that is ideal for use with machines with repetitive operation cycles with the mechanical motion and shaft rotation correlated to each other. Like other Style “P” switches, present on the 803-P5X switch is 11 degrees minimum and 349 degrees maximum for cam duration, a 400 RPM maximum shaft speed, and 25 Amp. NC or normally-closed double break contacts. The 803-P5X cam switch is also equipped with internal dwell and timing settings which are adjustable only when the device has been stopped and a spring-loaded cam-roller assembly are mounted to the contact base.



The operating temperature range of the 803-P5X Style “P” rotating cam limit switch ranges from -30 to 66 degrees Celsius, while its storage temperature range is from -30 to 93 degrees Celsius. This switch is protected from moisture and debris with a Type 1 enclosure and it can be mounted on any plane and still be capable of rotating well in either a counterclockwise or a clockwise direction. Its typical shaft torques are 0.5 pounds on an inch with the cam roller in the valley or lowest position, of 3  pounds on an inch when the cam roller rides on the lobe or the highest position, and one of 7 pounds on an inch when the cam roller rides up the cam ramp. The 803-P5X rotating cam limit switch also has an approximate weight of 6.4 kilograms or 14 pounds.



Technical Description of 803-P5X

The Allen-Bradley 803-P5X has 5 Circuits, 25 Amps, and a 400 rpm Max. Shaft Speed. It also contains a N.C. Double Break Contact and 2-12 Independent Cam Operators.
Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 803-P5X. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 803-P5X. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the 803-P5X such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
803-P5X Ser A
803-P5X/A, Series A, Rev A Request Quote

Common misspellings:
  • b03-P5X
  • 8o3-P5X
  • 803P5X
PDF