803-P7W | Allen Bradley PLC 803 Rotating Cam Limit Switches

803-P7W

Rated 5 with 18 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

803-P7W

Revisions: Ser A 
Description: The 803-P7W rotating cam limit switch has been designed and manufactured by Allen-Bradley/Rockwell Automation as part of the Bulletin 803 switch series. It is manufactured with 7 cams, a high-speed shaft with a right hand extension, a Type 1 enclosure, and normally closed contacts. The 803-P7W rotating cam limit switch also comes with an adjustment sprocket that can adjust its shaft externally. The maximum shaft speed supported by this switch is 400 RPM in both clockwise and counterclockwise directions. The 803-P7W rotating cam limit switch can handle heavy-duty industrial applications such as steel forming and other metal forming applications.
Available Now
Request a quote for 803-P7W

Description: The 803-P7W rotating cam limit switch has been designed and manufactured by Allen-Bradley/Rockwell Automation as part of the Bulletin 803 switch series. It is manufactured with 7 cams, a high-speed shaft with a right hand extension, a Type 1 enclosure, and normally closed contacts. The 803-P7W rotating cam limit switch also comes with an adjustment sprocket that can adjust its shaft externally. The maximum shaft speed supported by this switch is 400 RPM in both clockwise and counterclockwise directions. The 803-P7W rotating cam limit switch can handle heavy-duty industrial applications such as steel forming and other metal forming applications.

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: Ser A 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 803-P7W.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 5 with 18 reviews

    Technical Specifications for 803-P7W

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.803-P7W
Product TypeRotating Cam Limit Switch
Style of DeviceP
Circuits7
ModificationN/A
Modification 2External Adjustment Sprocket
Modification 3N/A
Enclosure Type1
Amps25
ContactN.C. Double Break
Cam Operators2-12 Independent
Max. Shaft Speed400 rpm
Cam Duration11°-349°
Extension StandardRight Shaft
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.803-P7W
Product TypeRotating Cam Limit Switch
Style of DeviceP
Circuits7
ModificationN/A
Modification 2External Adjustment Sprocket
Modification 3N/A
Enclosure Type1
Amps25
ContactN.C. Double Break
Cam Operators2-12 Independent
Max. Shaft Speed400 rpm
Cam Duration11°-349°
Extension StandardRight Shaft
s

About 803-P7W

The 803-P7W is manufactured by Allen Bradley; it is a Rotating cam switch module from the 803 series of Limit Switches. The 803-P7W is a Style P design with NC cam opened contacts and a total of 7 internal switches. The Style P cam switch is a high speed and low-cost module with internal adjustments. The 803-P7W has a 25 Amp NC double break contact. The maximum shaft speed is 400 RPM, the module is enclosed in a Type 1 general purpose enclosure, and the operators have cams, although the cam codes need to be specified separately while ordering. The 803-P7W is to be operated in a temperature range of -22 to 150 degrees Fahrenheit (-30 to 66 degrees Celsius). It is stored at an ambient temperature zone of -22 to 200 degrees Fahrenheit (-30 to 93 degrees Celsius). The size of the 803-P7W is around 7.13 x 2.44 x 5.63 inches and it has a shaft length of 1.5 inches.



The 803-P7W has its shaft extension on the left-hand side by default. It also has an external adjustment sprocket for a chain drive, in order to change the relative position between the shaft and the driving mechanism. The sprocket has 48 teeth and is compatible with a number 35 chain and the 803-P7W does not have speed reducers or internally adjustable cams. The 803-P7W operates on the rotation of the shaft. When the shaft rotates, the cams will activate the switches based on the alignment of the cams; this will, in turn, operate the machinery. The duration of activations is determined by the size of the lobe and the cam position, which also determines how long the switch will remain activated.



Technical Description of 803-P7W

The Allen-Bradley 803-P7W has 7 Circuits, 25 Amps, and a 400 rpm Max. Shaft Speed. It also contains a N.C. Double Break Contact and 2-12 Independent Cam Operators.

Repair Services for 803-P7W

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 803-P7W. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for 803-P7W

Please refer to the manual for more information about the 803-P7W such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
803-P7W Ser A
803-P7W/A, Series A, Rev A Request Quote
Common misspellings:
  • b03-P7W
  • 8o3-P7W
  • 803P7W

Dimensions For 803-P7W

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 803-P7W

Resolutions For 803-P7W

About

Technical Specifications for 803-P7W

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.803-P7W
Product TypeRotating Cam Limit Switch
Style of DeviceP
Circuits7
ModificationN/A
Modification 2External Adjustment Sprocket
Modification 3N/A
Enclosure Type1
Amps25
ContactN.C. Double Break
Cam Operators2-12 Independent
Max. Shaft Speed400 rpm
Cam Duration11°-349°
Extension StandardRight Shaft
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.803-P7W
Product TypeRotating Cam Limit Switch
Style of DeviceP
Circuits7
ModificationN/A
Modification 2External Adjustment Sprocket
Modification 3N/A
Enclosure Type1
Amps25
ContactN.C. Double Break
Cam Operators2-12 Independent
Max. Shaft Speed400 rpm
Cam Duration11°-349°
Extension StandardRight Shaft

About 803-P7W

The 803-P7W is manufactured by Allen Bradley; it is a Rotating cam switch module from the 803 series of Limit Switches. The 803-P7W is a Style P design with NC cam opened contacts and a total of 7 internal switches. The Style P cam switch is a high speed and low-cost module with internal adjustments. The 803-P7W has a 25 Amp NC double break contact. The maximum shaft speed is 400 RPM, the module is enclosed in a Type 1 general purpose enclosure, and the operators have cams, although the cam codes need to be specified separately while ordering. The 803-P7W is to be operated in a temperature range of -22 to 150 degrees Fahrenheit (-30 to 66 degrees Celsius). It is stored at an ambient temperature zone of -22 to 200 degrees Fahrenheit (-30 to 93 degrees Celsius). The size of the 803-P7W is around 7.13 x 2.44 x 5.63 inches and it has a shaft length of 1.5 inches.



The 803-P7W has its shaft extension on the left-hand side by default. It also has an external adjustment sprocket for a chain drive, in order to change the relative position between the shaft and the driving mechanism. The sprocket has 48 teeth and is compatible with a number 35 chain and the 803-P7W does not have speed reducers or internally adjustable cams. The 803-P7W operates on the rotation of the shaft. When the shaft rotates, the cams will activate the switches based on the alignment of the cams; this will, in turn, operate the machinery. The duration of activations is determined by the size of the lobe and the cam position, which also determines how long the switch will remain activated.



Technical Description of 803-P7W

The Allen-Bradley 803-P7W has 7 Circuits, 25 Amps, and a 400 rpm Max. Shaft Speed. It also contains a N.C. Double Break Contact and 2-12 Independent Cam Operators.
Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 803-P7W. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 803-P7W. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the 803-P7W such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
803-P7W Ser A
803-P7W/A, Series A, Rev A Request Quote

Common misspellings:
  • b03-P7W
  • 8o3-P7W
  • 803P7W
PDF