803-P8X

The 803-P8X is part of the Bulletin 803 series from Allen Bradley. It is a rotating cam limit switch, designed to sense the rotational cycle of the system to which it is applied. This module initiates functions at different parts of the machine’s cycle, allowing it to open and close contacts while the shaft is rotating. The 803-P8X is just one modification of the sturdy selection Rotating Cam Limit Switches from the 803 series. This is a Style “P” Bulletin 803 switch, meaning that it is a high-speed switch with a low-cost internal adjustment. It has N.C. (Normally Closed) double break contacts and provides a constant current of 25 A. It features 8 independent cam operators with a maximum shaft speed of 400 RPM and comes with a Type 1 enclosure; it is also available with cams. (The 803-PL8 modification can be ordered if the user wishes to purchase a switch without cams.).

Unlike other Bulletin 803 variants, the 803-P8X comes with a double shaft extension. The width of the 803-P8X is 7.13 inches with a height of 5.44 inches and its weight with cams is around 30 pounds. Most of the Bulletin 803 models come with a spring-loaded cam roller assembly, which is mounted to the base of the contact. These cam assemblies have two adjustable cam segments for every cam. The 803-P8X also has a rotating shaft. As the cam rotates on the shaft, the lobes of the cam push against the roller assembly to initiate the circuit. When the valley goes by the cam roller, the contact returns to its initial state. The position of this cam determines when the circuit opens or closes within the cycle. It is important to set the dwell and timing of the circuit accurately to get the desired results.