803-PL3X | Allen Bradley PLC 803 Rotating Cam Limit Switches

803-PL3X

Rated 4.9 with 20 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

803-PL3X

Revisions: Ser A 
Description: The Allen-Bradley 803-PL3X cam switch is a rotating cam limit switch from the Bulletin 803 and Style P series. It is designed to accommodate 3 cams, but it does not come with the cams built into it like most Bulletin 803 switches do. The cams for the 803-PL3X rotating cam limit switch must be ordered separately in a compatible Bulletin 803 series cam kit and then installed by the users. The shaft of this switch features a left hand extension in addition to the standard Style P right hand extension and it can rotate clockwise or counterclockwise. Additionally, the shaft of the 803-PL3X rotating cam limit switch can rotate at up to 400 RPM.
Available Now
Request a quote for 803-PL3X

Description: The Allen-Bradley 803-PL3X cam switch is a rotating cam limit switch from the Bulletin 803 and Style P series. It is designed to accommodate 3 cams, but it does not come with the cams built into it like most Bulletin 803 switches do. The cams for the 803-PL3X rotating cam limit switch must be ordered separately in a compatible Bulletin 803 series cam kit and then installed by the users. The shaft of this switch features a left hand extension in addition to the standard Style P right hand extension and it can rotate clockwise or counterclockwise. Additionally, the shaft of the 803-PL3X rotating cam limit switch can rotate at up to 400 RPM.

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: Ser A 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 803-PL3X.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.9 with 20 reviews

    Technical Specifications for 803-PL3X

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.803-PL3X
Product TypeRotating Cam Limit Switch
Style of DeviceP
Circuits3
ModificationDouble Shaft Extension
Modification 2N/A
Modification 3N/A
Enclosure Type1
Amps25
ContactN.C. Double Break
Cam Operators2-12 Independent
Max. Shaft Speed400 rpm
Cam Duration11°-349°
Extension StandardRight Shaft
Type 1 Enclosure OperatorLess Cams
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.803-PL3X
Product TypeRotating Cam Limit Switch
Style of DeviceP
Circuits3
ModificationDouble Shaft Extension
Modification 2N/A
Modification 3N/A
Enclosure Type1
Amps25
ContactN.C. Double Break
Cam Operators2-12 Independent
Max. Shaft Speed400 rpm
Cam Duration11°-349°
Extension StandardRight Shaft
Type 1 Enclosure OperatorLess Cams
s

About 803-PL3X

The Allen-Bradley 803-PL3X is a Style P rotating cam limit switch that has a double shaft extension, but which comes with a left-hand shaft extension. Its first cam is found at the 3rd position from the shaft extension. The 803-PL3X also has internal dwell and timing settings that the user can configure, but only when the device is completely stopped. Style P switches, including the 803-PL3X switch, come with a cam duration of 11 degrees minimum and 349 degrees maximum, a maximum shaft speed of 400 RPM, a Type 1 enclosure, and 25 Amp. N. C. or normally closed double break contacts. You can also find a spring-loaded cam-roller assembly mounted to the contact base of this switch.



The adjustable degrees of dwell time for the 803-PL3X switch are 27 to 33 degrees when the N.C. contact opens and they are 327 to 333 degrees when the N.C. contact remains closed. Its typical shaft torques are 3 pounds on an inch when the cam roller rides on its highest point or lobe, 7 pounds on an inch when the cam roller rides up its cam ramp, and they are 0.5 pounds on an inch with the cam roller is in its lowest point or valley. You can use the 803-PL3X switch for heavy-duty operations, with machines that have repetitive operation cycles and that have correlated shaft rotation and machine motion, and it is guaranteed to last a long time. This switch has a weight of approximately 14 pounds or 6.4 kilograms and it can be mounted on any plane without compromising the rotation in both directions. It has an operating temperature of -30 to 66 degrees Celsius and a non-operating temperature of -30 to 93 degrees Celsius.



Technical Description of 803-PL3X

The Allen-Bradley 803-PL3X has 3 Circuits, 25 Amps, and a 400 rpm Max. Shaft Speed. It also contains a N.C. Double Break Contact and 2-12 Independent Cam Operators.

Repair Services for 803-PL3X

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 803-PL3X. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for 803-PL3X

Please refer to the manual for more information about the 803-PL3X such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
803-PL3X Ser A
803-PL3X/A, Series A, Rev A Request Quote
Common misspellings:
  • b03-PL3X
  • 8o3-PL3X
  • 803-P13X
  • 803PL3X

Dimensions For 803-PL3X

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 803-PL3X

Resolutions For 803-PL3X

About

Technical Specifications for 803-PL3X

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.803-PL3X
Product TypeRotating Cam Limit Switch
Style of DeviceP
Circuits3
ModificationDouble Shaft Extension
Modification 2N/A
Modification 3N/A
Enclosure Type1
Amps25
ContactN.C. Double Break
Cam Operators2-12 Independent
Max. Shaft Speed400 rpm
Cam Duration11°-349°
Extension StandardRight Shaft
Type 1 Enclosure OperatorLess Cams
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.803-PL3X
Product TypeRotating Cam Limit Switch
Style of DeviceP
Circuits3
ModificationDouble Shaft Extension
Modification 2N/A
Modification 3N/A
Enclosure Type1
Amps25
ContactN.C. Double Break
Cam Operators2-12 Independent
Max. Shaft Speed400 rpm
Cam Duration11°-349°
Extension StandardRight Shaft
Type 1 Enclosure OperatorLess Cams

About 803-PL3X

The Allen-Bradley 803-PL3X is a Style P rotating cam limit switch that has a double shaft extension, but which comes with a left-hand shaft extension. Its first cam is found at the 3rd position from the shaft extension. The 803-PL3X also has internal dwell and timing settings that the user can configure, but only when the device is completely stopped. Style P switches, including the 803-PL3X switch, come with a cam duration of 11 degrees minimum and 349 degrees maximum, a maximum shaft speed of 400 RPM, a Type 1 enclosure, and 25 Amp. N. C. or normally closed double break contacts. You can also find a spring-loaded cam-roller assembly mounted to the contact base of this switch.



The adjustable degrees of dwell time for the 803-PL3X switch are 27 to 33 degrees when the N.C. contact opens and they are 327 to 333 degrees when the N.C. contact remains closed. Its typical shaft torques are 3 pounds on an inch when the cam roller rides on its highest point or lobe, 7 pounds on an inch when the cam roller rides up its cam ramp, and they are 0.5 pounds on an inch with the cam roller is in its lowest point or valley. You can use the 803-PL3X switch for heavy-duty operations, with machines that have repetitive operation cycles and that have correlated shaft rotation and machine motion, and it is guaranteed to last a long time. This switch has a weight of approximately 14 pounds or 6.4 kilograms and it can be mounted on any plane without compromising the rotation in both directions. It has an operating temperature of -30 to 66 degrees Celsius and a non-operating temperature of -30 to 93 degrees Celsius.



Technical Description of 803-PL3X

The Allen-Bradley 803-PL3X has 3 Circuits, 25 Amps, and a 400 rpm Max. Shaft Speed. It also contains a N.C. Double Break Contact and 2-12 Independent Cam Operators.
Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 803-PL3X. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 803-PL3X. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the 803-PL3X such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
803-PL3X Ser A
803-PL3X/A, Series A, Rev A Request Quote

Common misspellings:
  • b03-PL3X
  • 8o3-PL3X
  • 803-P13X
  • 803PL3X
PDF