DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Warranty: | 1 year DO Supply Warranty Included |
Shipping: | Worldwide shipping via UPS, DHL, and TNT |
Repairs: | We offer repair service for the 803-PL8. |
Exchange: | Exchange credit for your defective unit available. |
Conditions: | We sell preowned surplus and refurbished parts. |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 803-PL8 |
Product Type | Rotating Cam Limit Switch |
Style of Device | P |
Circuits | 8 |
Modification | N/A |
Modification 2 | N/A |
Modification 3 | N/A |
Enclosure Type | 1 |
Amps | 25 |
Contact | N.C. Double Break |
Cam Operators | 2-12 Independent |
Max. Shaft Speed | 400 rpm |
Cam Duration | 11°-349° |
Extension Standard | Right Shaft |
Type 1 Enclosure Operator | Less Cams |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 803-PL8 |
Product Type | Rotating Cam Limit Switch |
Style of Device | P |
Circuits | 8 |
Modification | N/A |
Modification 2 | N/A |
Modification 3 | N/A |
Enclosure Type | 1 |
Amps | 25 |
Contact | N.C. Double Break |
Cam Operators | 2-12 Independent |
Max. Shaft Speed | 400 rpm |
Cam Duration | 11°-349° |
Extension Standard | Right Shaft |
Type 1 Enclosure Operator | Less Cams |
The Allen-Bradley 803-PL8 is a Style P operator-less cam rotating cam limit switch that is equipped with a left-hand shaft extension and that has a cam code designator of 8, which indicates the position of the first cam, beginning from the shaft extension. Present on this switch is a spring-loaded cam-roller assembly that is mounted to the switch’s contact base, and internal dwell time and timing settings that the user can adjust when the device is at a complete stop. Like other Style P switches, the 803-PL8 rotating cam limit switch also features a cam duration time measured in the degree that ranges from a minimum of 11 degrees and a maximum of 349 degrees, 25 Amp. N. C. or normally closed double break contacts, and a maximum shaft speed of 400 RPM.
The typical shaft torques of the 803-PL8 rotating cam limit switch are 0.5 pounds on an inch with the cam roller in the valley or the lowest possible position, 7 pounds on an inch when the cam roller rides up the cam ramp from the lowest position to the highest, and 3 pounds on an inch when the cam roller rides on the lobe or the highest possible position. The 803-PL8 also has a storage temperature range of -30 to 93 degrees Celsius and an operating temperature range of -30 to 66 degrees Celsius. Note that the 803-PL8 switch comes with a Type 1 enclosure rating and it weighs approximately 22 pounds or 10 kilograms. Users can mount this switch on any plane at an angle without affecting its rotation, which works well in either direction.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 803-PL8. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Please refer to the manual for more information about the 803-PL8 such as the wiring diagrams, data sheets and migration or obsolescence details.
Revision Part # | Also Known as | Availability |
803-PL8 Ser A
|
803-PL8/A, Series A, Rev A | Request Quote |
Size | |
Input Type | |
Panel Cutout Height | in mm |
Panel Cutout Width | in mm |
Terminal Height | in mm |
Terminal Width | in mm |
Terminal Overall Depth | in mm |
Terminal Mounted Depth | in mm |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 803-PL8 |
Product Type | Rotating Cam Limit Switch |
Style of Device | P |
Circuits | 8 |
Modification | N/A |
Modification 2 | N/A |
Modification 3 | N/A |
Enclosure Type | 1 |
Amps | 25 |
Contact | N.C. Double Break |
Cam Operators | 2-12 Independent |
Max. Shaft Speed | 400 rpm |
Cam Duration | 11°-349° |
Extension Standard | Right Shaft |
Type 1 Enclosure Operator | Less Cams |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 803-PL8 |
Product Type | Rotating Cam Limit Switch |
Style of Device | P |
Circuits | 8 |
Modification | N/A |
Modification 2 | N/A |
Modification 3 | N/A |
Enclosure Type | 1 |
Amps | 25 |
Contact | N.C. Double Break |
Cam Operators | 2-12 Independent |
Max. Shaft Speed | 400 rpm |
Cam Duration | 11°-349° |
Extension Standard | Right Shaft |
Type 1 Enclosure Operator | Less Cams |
The Allen-Bradley 803-PL8 is a Style P operator-less cam rotating cam limit switch that is equipped with a left-hand shaft extension and that has a cam code designator of 8, which indicates the position of the first cam, beginning from the shaft extension. Present on this switch is a spring-loaded cam-roller assembly that is mounted to the switch’s contact base, and internal dwell time and timing settings that the user can adjust when the device is at a complete stop. Like other Style P switches, the 803-PL8 rotating cam limit switch also features a cam duration time measured in the degree that ranges from a minimum of 11 degrees and a maximum of 349 degrees, 25 Amp. N. C. or normally closed double break contacts, and a maximum shaft speed of 400 RPM.
The typical shaft torques of the 803-PL8 rotating cam limit switch are 0.5 pounds on an inch with the cam roller in the valley or the lowest possible position, 7 pounds on an inch when the cam roller rides up the cam ramp from the lowest position to the highest, and 3 pounds on an inch when the cam roller rides on the lobe or the highest possible position. The 803-PL8 also has a storage temperature range of -30 to 93 degrees Celsius and an operating temperature range of -30 to 66 degrees Celsius. Note that the 803-PL8 switch comes with a Type 1 enclosure rating and it weighs approximately 22 pounds or 10 kilograms. Users can mount this switch on any plane at an angle without affecting its rotation, which works well in either direction.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 803-PL8. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 803-PL8. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Please refer to the manual for more information about the 803-PL8 such as the wiring diagrams, data sheets and migration or obsolescence details.
Revision Part # | Also Known as | Availability |
803-PL8 Ser A
|
803-PL8/A, Series A, Rev A | Request Quote |