1756-OF8IK | Allen Bradley PLC ControlLogix

1756-OF8IK

Rated 4.9 with 10 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

1756-OF8IK

Revisions: Ser A 
Description: Allen Bradley ControlLogix Isoloated Analog Output Module with 8 Current Outputs
Available Now
Request a quote for 1756-OF8IK

Description:

Allen Bradley ControlLogix Isoloated Analog Output Module with 8 Current Outputs


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: Ser A 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1756-OF8IK.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.9 with 10 reviews

    Technical Specifications for 1756-OF8IK

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1756-OF8IK
SeriesControlLogix
Module TypeIsoloated Analog Output Module
Outputs8 Current
Current Draw (24 Volts DC)400 milliamps
Power Dissipation 6.5 Watts
Output Range0-20 or 4-20 milliamps
Resolution15 bits
Output Voltage Range5-30 Volts DC
Removeable Terminal Block(s)1756-TBNH, 1756-TBSH
Isolation Voltage50 Volts Continuous
EnclosureNone
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1756-OF8IK
SeriesControlLogix
Module TypeIsoloated Analog Output Module
Outputs8 Current
Current Draw (24 Volts DC)400 milliamps
Power Dissipation 6.5 Watts
Output Range0-20 or 4-20 milliamps
Resolution15 bits
Output Voltage Range5-30 Volts DC
Removeable Terminal Block(s)1756-TBNH, 1756-TBSH
Isolation Voltage50 Volts Continuous
EnclosureNone
s

About 1756-OF8IK

The 1756-OF8IK module is a ControlLogix isolated voltage/current analog output module manufactured by Allen-Bradley. Its output range is -10 to 10 Volts and 0 to 20 milliamps. It features 8 isolated points for current and voltage (36 pins) and its output impedance is 46 Ohms. It has a 16-bit resolution and its current draw is 200 milliamps at 5.1 Volts DC. At 24 Volts, its current draw ratings are: 220 milliamps with 250 Ohm loads (in the voltage and current modes) for the current mode only, its current draw at 24 Volts DC is 275 milliamps with 500 Ohm loads, 340 milliamps with 750 Ohm loads, and 385 milliamps with 1000 Ohm loads. The total backplane power of the 1756-OF8IK module in the voltage mode is 6.3 Watts and its total backplane power ratings in the current mode are 6.3 Watts with 250 Ohm loads, 7.6 Watts with 500 Ohm loads, 9.2 Watts with 750 Ohm loads, and 10.2 Watts with 1000 Ohm loads.



The drive capability of the 1756-OF8IK module is 0 to 1000 Ohms for the current mode and it uses the IEEE-32-bit floating point data format. It uses R-Ladder DAC method for module conversion and its module scan time is 1 millisecond. It is designed to function with the Allen-Bradley 1756-TBCH and 1756-TBS6H removable terminal blocks, and its terminal block keying is done mechanically. Some protective capabilities of the 1756-OF8IK isolated analog output module include -30 to +30 Volts of overvoltage protection, short circuit detection, and open-circuit detection. This unit is conformally coated to withstand harsh environments and the recommended wire size for its installation is 22 to 14 AWG solid or stranded shielded copper wire rated for 90 degrees Celsius or greater.

Repair Services for 1756-OF8IK

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote
Conformal Coat

Revisions for 1756-OF8IK

Please refer to the manual for more information about the 1756-OF8IK such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1756-OF8IK Ser A
1756-OF8IK/A, Series A, Rev A Request Quote
Common misspellings:
  • l756-OF8IK
  • 1756-0F8IK
  • 1756-OFbIK
  • 1756OF8IK

Dimensions For 1756-OF8IK

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1756-OF8IK

Resolutions For 1756-OF8IK

About

Technical Specifications for 1756-OF8IK

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1756-OF8IK
SeriesControlLogix
Module TypeIsoloated Analog Output Module
Outputs8 Current
Current Draw (24 Volts DC)400 milliamps
Power Dissipation 6.5 Watts
Output Range0-20 or 4-20 milliamps
Resolution15 bits
Output Voltage Range5-30 Volts DC
Removeable Terminal Block(s)1756-TBNH, 1756-TBSH
Isolation Voltage50 Volts Continuous
EnclosureNone
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1756-OF8IK
SeriesControlLogix
Module TypeIsoloated Analog Output Module
Outputs8 Current
Current Draw (24 Volts DC)400 milliamps
Power Dissipation 6.5 Watts
Output Range0-20 or 4-20 milliamps
Resolution15 bits
Output Voltage Range5-30 Volts DC
Removeable Terminal Block(s)1756-TBNH, 1756-TBSH
Isolation Voltage50 Volts Continuous
EnclosureNone

About 1756-OF8IK

The 1756-OF8IK module is a ControlLogix isolated voltage/current analog output module manufactured by Allen-Bradley. Its output range is -10 to 10 Volts and 0 to 20 milliamps. It features 8 isolated points for current and voltage (36 pins) and its output impedance is 46 Ohms. It has a 16-bit resolution and its current draw is 200 milliamps at 5.1 Volts DC. At 24 Volts, its current draw ratings are: 220 milliamps with 250 Ohm loads (in the voltage and current modes) for the current mode only, its current draw at 24 Volts DC is 275 milliamps with 500 Ohm loads, 340 milliamps with 750 Ohm loads, and 385 milliamps with 1000 Ohm loads. The total backplane power of the 1756-OF8IK module in the voltage mode is 6.3 Watts and its total backplane power ratings in the current mode are 6.3 Watts with 250 Ohm loads, 7.6 Watts with 500 Ohm loads, 9.2 Watts with 750 Ohm loads, and 10.2 Watts with 1000 Ohm loads.



The drive capability of the 1756-OF8IK module is 0 to 1000 Ohms for the current mode and it uses the IEEE-32-bit floating point data format. It uses R-Ladder DAC method for module conversion and its module scan time is 1 millisecond. It is designed to function with the Allen-Bradley 1756-TBCH and 1756-TBS6H removable terminal blocks, and its terminal block keying is done mechanically. Some protective capabilities of the 1756-OF8IK isolated analog output module include -30 to +30 Volts of overvoltage protection, short circuit detection, and open-circuit detection. This unit is conformally coated to withstand harsh environments and the recommended wire size for its installation is 22 to 14 AWG solid or stranded shielded copper wire rated for 90 degrees Celsius or greater.

Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote
Conformal Coat
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote
Conformal Coat
Revisions

Please refer to the manual for more information about the 1756-OF8IK such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1756-OF8IK Ser A
1756-OF8IK/A, Series A, Rev A Request Quote

Common misspellings:
  • l756-OF8IK
  • 1756-0F8IK
  • 1756-OFbIK
  • 1756OF8IK
PDF