5094-RTB3IS | Allen Bradley PLC FLEX 5000

5094-RTB3IS

5094-RTB3IS

Description:

The Allen-Bradley 5094-RTB3IS Flex 5000 CJC Isolated Removable Terminal Block is made for the Flex 5000 I/O System. This removable terminal block has spring-type terminals that are individually-isolated.

Rated 4.7 with 7 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Available Now

Submit RFQ for 5094-RTB3IS

Add more parts to quote

Description:

The Allen-Bradley 5094-RTB3IS Flex 5000 CJC Isolated Removable Terminal Block is made for the Flex 5000 I/O System. This removable terminal block has spring-type terminals that are individually-isolated.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 5094-RTB3IS.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.7 with 7 reviews

    Technical Specifications for 5094-RTB3IS

BrandAllen-Bradley / Rockwell Automation
SeriesFLEX 5000
Part Number5094-RTB3IS
DescriptionFlex 5000 Isolated Removable Terminal Block
Application Flex 5000 I/O
Current rating2.0 Amps
Sensor Actuator Rating10.0 Amps
Voltage Range18 to 32 Volts DC
Channel IsolationYes
Terminal TypeSpring-Type Terminals
ConductorSolid/Stranded Copper Wire
Average Weight 202 Grams
Approximate Dimensions53.0 x 94.0 x 76.0 Millimeters
BrandAllen-Bradley / Rockwell Automation
SeriesFLEX 5000
Part Number5094-RTB3IS
DescriptionFlex 5000 Isolated Removable Terminal Block
Application Flex 5000 I/O
Current rating2.0 Amps
Sensor Actuator Rating10.0 Amps
Voltage Range18 to 32 Volts DC
Channel IsolationYes
Terminal TypeSpring-Type Terminals
ConductorSolid/Stranded Copper Wire
Average Weight 202 Grams
Approximate Dimensions53.0 x 94.0 x 76.0 Millimeters
s

About 5094-RTB3IS

The Allen-Bradley 5094-RTB3IS Removable Terminal Block is part of the Flex 5000 series of I/O systems. The Allen-Bradley Flex 5000 I/O system architecture offers cost-effective input and output solutions that spans a wide range of applications including high-speed digital and machine process control applications. The 5094-RTB3IS Removable Terminal Block is an integral component of the complete Flex 5000 I/O terminal base assembly. The 5094-RTB3IS Removable Terminal Block has spring-type terminals that are individually-isolated and that are also isolated from the chassis. Each terminal has an approximate wire size of 0.34 x 1.5 millimeters square (22 to 16 AWG) and an insulation thickness of 1.2 millimeters. The 5094-RTB3IS Removable Terminal Block has a maximum I/O current rating of 2.0 Amps per point and a maximum actuator pass-through current draw of 10.0 Amps. It has a nominal input voltage rating of 32 Volts DC and an operating voltage range of 18 to 32 Volts DC.



 



The 5094-RTB3IS Removable Terminal Block has 250 Amps of continuous standard insulation between I/O channels and between the I/O chassis and the sensor actuator. The 5094-RTB3IS Removable Terminal Block has solid copper wire terminals with 0.3 x 2.5 millimeters square average wire sizes and an I/O edge connector for connecting to the module terminals. The 5094-RTB3IS Removable Terminal Block supports an optional rear-side shield bar which is required for installing and wiring shields for all the Flex 5000 analog I/O and high-speed counter modules. On the front side of the removable terminal block are I/O terminal strips for connecting the commons, I/O wiring, backplane power, and user-supplied power. The 5094-RTB3IS Removable Terminal Block has an IECx, ATEX T4 temperature code, and it has an open-type design. It has approximate mounting dimensions of 2.0 x 3.7 x 3.0 inches and an average weight of 0.5 pounds.



Repair Services for 5094-RTB3IS

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 5094-RTB3IS. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 5094-RTB3IS

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 5094-RTB3IS

Resolutions For 5094-RTB3IS

About

Technical Specifications for 5094-RTB3IS

BrandAllen-Bradley / Rockwell Automation
SeriesFLEX 5000
Part Number5094-RTB3IS
DescriptionFlex 5000 Isolated Removable Terminal Block
Application Flex 5000 I/O
Current rating2.0 Amps
Sensor Actuator Rating10.0 Amps
Voltage Range18 to 32 Volts DC
Channel IsolationYes
Terminal TypeSpring-Type Terminals
ConductorSolid/Stranded Copper Wire
Average Weight 202 Grams
Approximate Dimensions53.0 x 94.0 x 76.0 Millimeters
BrandAllen-Bradley / Rockwell Automation
SeriesFLEX 5000
Part Number5094-RTB3IS
DescriptionFlex 5000 Isolated Removable Terminal Block
Application Flex 5000 I/O
Current rating2.0 Amps
Sensor Actuator Rating10.0 Amps
Voltage Range18 to 32 Volts DC
Channel IsolationYes
Terminal TypeSpring-Type Terminals
ConductorSolid/Stranded Copper Wire
Average Weight 202 Grams
Approximate Dimensions53.0 x 94.0 x 76.0 Millimeters

About 5094-RTB3IS

The Allen-Bradley 5094-RTB3IS Removable Terminal Block is part of the Flex 5000 series of I/O systems. The Allen-Bradley Flex 5000 I/O system architecture offers cost-effective input and output solutions that spans a wide range of applications including high-speed digital and machine process control applications. The 5094-RTB3IS Removable Terminal Block is an integral component of the complete Flex 5000 I/O terminal base assembly. The 5094-RTB3IS Removable Terminal Block has spring-type terminals that are individually-isolated and that are also isolated from the chassis. Each terminal has an approximate wire size of 0.34 x 1.5 millimeters square (22 to 16 AWG) and an insulation thickness of 1.2 millimeters. The 5094-RTB3IS Removable Terminal Block has a maximum I/O current rating of 2.0 Amps per point and a maximum actuator pass-through current draw of 10.0 Amps. It has a nominal input voltage rating of 32 Volts DC and an operating voltage range of 18 to 32 Volts DC.



 



The 5094-RTB3IS Removable Terminal Block has 250 Amps of continuous standard insulation between I/O channels and between the I/O chassis and the sensor actuator. The 5094-RTB3IS Removable Terminal Block has solid copper wire terminals with 0.3 x 2.5 millimeters square average wire sizes and an I/O edge connector for connecting to the module terminals. The 5094-RTB3IS Removable Terminal Block supports an optional rear-side shield bar which is required for installing and wiring shields for all the Flex 5000 analog I/O and high-speed counter modules. On the front side of the removable terminal block are I/O terminal strips for connecting the commons, I/O wiring, backplane power, and user-supplied power. The 5094-RTB3IS Removable Terminal Block has an IECx, ATEX T4 temperature code, and it has an open-type design. It has approximate mounting dimensions of 2.0 x 3.7 x 3.0 inches and an average weight of 0.5 pounds.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 5094-RTB3IS. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 5094-RTB3IS. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF