5094-RTB3IS

The Allen-Bradley 5094-RTB3IS Removable Terminal Block is part of the Flex 5000 series of I/O systems. The Allen-Bradley Flex 5000 I/O system architecture offers cost-effective input and output solutions that spans a wide range of applications including high-speed digital and machine process control applications. The 5094-RTB3IS Removable Terminal Block is an integral component of the complete Flex 5000 I/O terminal base assembly. The 5094-RTB3IS Removable Terminal Block has spring-type terminals that are individually-isolated and that are also isolated from the chassis. Each terminal has an approximate wire size of 0.34 x 1.5 millimeters square (22 to 16 AWG) and an insulation thickness of 1.2 millimeters. The 5094-RTB3IS Removable Terminal Block has a maximum I/O current rating of 2.0 Amps per point and a maximum actuator pass-through current draw of 10.0 Amps. It has a nominal input voltage rating of 32 Volts DC and an operating voltage range of 18 to 32 Volts DC.

The 5094-RTB3IS Removable Terminal Block has 250 Amps of continuous standard insulation between I/O channels and between the I/O chassis and the sensor actuator. The 5094-RTB3IS Removable Terminal Block has solid copper wire terminals with 0.3 x 2.5 millimeters square average wire sizes and an I/O edge connector for connecting to the module terminals. The 5094-RTB3IS Removable Terminal Block supports an optional rear-side shield bar which is required for installing and wiring shields for all the Flex 5000 analog I/O and high-speed counter modules. On the front side of the removable terminal block are I/O terminal strips for connecting the commons, I/O wiring, backplane power, and user-supplied power. The 5094-RTB3IS Removable Terminal Block has an IECx, ATEX T4 temperature code, and it has an open-type design. It has approximate mounting dimensions of 2.0 x 3.7 x 3.0 inches and an average weight of 0.5 pounds.