Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley FLEX 5000 5094-STB-QTY5

Product image is representative; revision or series may vary. Contact us to request a specific version.

5094-STB-QTY5

|
Need a Specific Revision?

The Allen-Bradley 5094-STB-QTY5 kit is a set of five shield bars. Allen-Bradley shield bars such as the 5094-STB shield bars are required to wire shields for HART modules, HSC modules, and analog I/O modules.

Out of stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 5094-STB-QTY5

ManufacturerAllen Bradley
Product TypeShield bars
Product LineFLEX 5000
Part Number5094-STB-QTY5
Weight0.25 lbs (0.11 kg)
Quantity5
CompatibilityHART / HSC / Analog I/O modules
EnclosureOpen
Maximum Current Rating10 Amps
Maximum Voltage Rating300 Volts AC
Wire Size22 to 14 AWG
Wire TypeCopper
Request a Repair

The Allen-Bradley 5094-STB-QTY5 kit is a pack of 5 shield bars. Shield bars like the catalog number 5094-STB shield bar from the 5094-STB-QTY5 kit are required to wire the shields for all the analog I/O modules and the HSC modules that use terminal base assemblies with the catalog numbers 5094-TB3 or 5094-TB3T. The 5094-STB-QTY5 kit is available separately from these modules and it can be ordered from Allen-Bradley as required. The 5094-STB shield bar from the 5094-STB-QTY5 kit is also required to wire shields for HART modules which use the terminal base assemblies with the catalog numbers 5094-TB3ISXT, 5094-TB3IXT, 5094-TB3IS, or 5094-TB3I. The shield bar should be grounded separately after it is installed in the FLEX 5000 I/O system. The 5094-STB shield bar is available in an open enclosure. The bar weighs approximately 56 grams. The dimensions of the 5094-STB shield bar are 33 x 94 x 24 millimeters.

The 5094-STB shield bar includes mounting hooks, release hatches, and locking pegs. The maximum current rating for the 5094-STB shield bar is 10 Amps and the maximum voltage rating for the shield bar is 300 Volts AC. The wire size recommended for use with the 5094-STB shield bar is 22 to 14 AWG. The wire should be made of solid or stranded copper which has a temperature rating of at least 105 degrees Celsius. The insulation on the wire should not exceed 1.2 millimeters in thickness. The insulation stripping length is 12 millimeters with a tolerance of ±1 millimeter. The torque specifications are 0.4 N-m. The 5094-STB shield bar accessory contains 16 screw terminals to extended common/SA and voltage/SA+ devices. The 5094-STB shield bar should only be installed by trained technicians.