1797-IE8H - In Stock | Allen Bradley PLC Flex I/O 1797

1797-IE8H

1797-IE8H

Revisions: Ser A 
Description: The Allen-Bradley 1797-IE8H FLEX Ex HART I/O Module has 8 Inputs and a Single-ended Non-isolated Input Type. It operates with a 15V @ 22mA Functional Data Range and a 16 bits Resolution.
Rated 5 with 17 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

In Stock Ships Today

Submit RFQ for 1797-IE8H

Add more parts to quote

Description: The Allen-Bradley 1797-IE8H FLEX Ex HART I/O Module has 8 Inputs and a Single-ended Non-isolated Input Type. It operates with a 15V @ 22mA Functional Data Range and a 16 bits Resolution.

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: Ser A 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1797-IE8H.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 5 with 17 reviews

    Technical Specifications for 1797-IE8H

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1797-IE8H
Product TypeFLEX Ex HART I/O Module
Inputs8
Input TypeSingle-ended Non-isolated
Resolution16 bits
Data FormatConfigurable
Functional Data Range15V at 22mA
Module Field-side Power Consumption7.5 W
Power Dissipation5.2 W
Thermal Dissipation17.75 BTU/hour
Step Response4 ms
Weight200 g
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1797-IE8H
Product TypeFLEX Ex HART I/O Module
Inputs8
Input TypeSingle-ended Non-isolated
Resolution16 bits
Data FormatConfigurable
Functional Data Range15V at 22mA
Module Field-side Power Consumption7.5 W
Power Dissipation5.2 W
Thermal Dissipation17.75 BTU/hour
Step Response4 ms
Weight200 g
s

About 1797-IE8H

The 1797-IE8H is a hart analog module that belongs to the 1797 series of analog inputs manufactured and designed by Allen-Bradley. The Allen-Bradley 1797-IE8H hart analog module features 8 inputs and a resolution of 16 bits. It has an accuracy of 0.1% at a specific temperature of 20 degrees Celsius. It has a step response time of 4 milliseconds and 8 red fault indicators with a green power indicator. The Allen-Bradley 1797-IE8H hart analog module has a power dissipation of 5.2 Watts and a thermal dissipation of 5.2 Watts. The recommended environmental conditions for this module are an operational temperature of -20 to 70 degrees Celsius and a relative humidity of 5 to 95%. It is important to maintain these conditions in order to extend the life of the module.



The Allen-Bradley 1797-IE8H hart analog module cannot be in contact with electrostatic discharges since it is a very sensitive device. Technicians should be careful when installing it and once it is installed there should be a signal with this premise. The Allen-Bradley 1797-IE8H hart analog module can provide for different kinds of alarms and once connected to a ControlNet network, it can share signals with a PLC processor. This module is shipped already calibrated, but some applications might require periodic calibrations. This can be done by using a FLEX Ex I/O system. Some errors might require the same calibration process in order to be cleared. Some tools needed for calibration are a precision current source, a precision current meter, and an industrial terminal and interconnect cable.



Repair Services for 1797-IE8H

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1797-IE8H. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for 1797-IE8H

Please refer to the manual for more information about the 1797-IE8H such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1797-IE8H Ser A
1797-IE8H/A, Series A, Rev A Request Quote
Common misspellings:
  • l797-IE8H
  • 1797-IEbH
  • 1797IE8H

Dimensions For 1797-IE8H

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1797-IE8H

Resolutions For 1797-IE8H

About

Technical Specifications for 1797-IE8H

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1797-IE8H
Product TypeFLEX Ex HART I/O Module
Inputs8
Input TypeSingle-ended Non-isolated
Resolution16 bits
Data FormatConfigurable
Functional Data Range15V at 22mA
Module Field-side Power Consumption7.5 W
Power Dissipation5.2 W
Thermal Dissipation17.75 BTU/hour
Step Response4 ms
Weight200 g
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1797-IE8H
Product TypeFLEX Ex HART I/O Module
Inputs8
Input TypeSingle-ended Non-isolated
Resolution16 bits
Data FormatConfigurable
Functional Data Range15V at 22mA
Module Field-side Power Consumption7.5 W
Power Dissipation5.2 W
Thermal Dissipation17.75 BTU/hour
Step Response4 ms
Weight200 g

About 1797-IE8H

The 1797-IE8H is a hart analog module that belongs to the 1797 series of analog inputs manufactured and designed by Allen-Bradley. The Allen-Bradley 1797-IE8H hart analog module features 8 inputs and a resolution of 16 bits. It has an accuracy of 0.1% at a specific temperature of 20 degrees Celsius. It has a step response time of 4 milliseconds and 8 red fault indicators with a green power indicator. The Allen-Bradley 1797-IE8H hart analog module has a power dissipation of 5.2 Watts and a thermal dissipation of 5.2 Watts. The recommended environmental conditions for this module are an operational temperature of -20 to 70 degrees Celsius and a relative humidity of 5 to 95%. It is important to maintain these conditions in order to extend the life of the module.



The Allen-Bradley 1797-IE8H hart analog module cannot be in contact with electrostatic discharges since it is a very sensitive device. Technicians should be careful when installing it and once it is installed there should be a signal with this premise. The Allen-Bradley 1797-IE8H hart analog module can provide for different kinds of alarms and once connected to a ControlNet network, it can share signals with a PLC processor. This module is shipped already calibrated, but some applications might require periodic calibrations. This can be done by using a FLEX Ex I/O system. Some errors might require the same calibration process in order to be cleared. Some tools needed for calibration are a precision current source, a precision current meter, and an industrial terminal and interconnect cable.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1797-IE8H. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1797-IE8H. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the 1797-IE8H such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1797-IE8H Ser A
1797-IE8H/A, Series A, Rev A Request Quote

Common misspellings:
  • l797-IE8H
  • 1797-IEbH
  • 1797IE8H
PDF