1753-L32BBBM-8A - In Stock | Allen Bradley PLC GuardPLC

1753-L32BBBM-8A

1753-L32BBBM-8A

Revisions: Ser A 
Description: The Allen-Bradley 1753-L32BBBM-8A controller is an industrial controller that is part of the Allen-Bradley GuardPLC series and that is meant to be used as part of a complete GuardPLC system. It comes with 24 digital inputs that are not electrically isolated and with 8 digital outputs that are also not electrically isolated. The 1753-L32BBBM-8A controller also has 8 analog inputs that are unipolar and not electrically isolated. The operating temperature range for this controller is from 32 to 140 degrees Fahrenheit and its storage temperature range is from -40 to 185 degrees Fahrenheit. The 1753-L32BBBM-8A controller has a relatively low protection rating of IP 20.
Rated 5 with 10 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

In Stock Ships Today

Submit RFQ for 1753-L32BBBM-8A

Add more parts to quote

Description: The Allen-Bradley 1753-L32BBBM-8A controller is an industrial controller that is part of the Allen-Bradley GuardPLC series and that is meant to be used as part of a complete GuardPLC system. It comes with 24 digital inputs that are not electrically isolated and with 8 digital outputs that are also not electrically isolated. The 1753-L32BBBM-8A controller also has 8 analog inputs that are unipolar and not electrically isolated. The operating temperature range for this controller is from 32 to 140 degrees Fahrenheit and its storage temperature range is from -40 to 185 degrees Fahrenheit. The 1753-L32BBBM-8A controller has a relatively low protection rating of IP 20.

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: Ser A 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1753-L32BBBM-8A.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 5 with 10 reviews

    Technical Specifications for 1753-L32BBBM-8A

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1753-L32BBBM-8A
Product TypeSafety Controller
Product SeriesGuardPLC 1800
User Memory250 KB user program memory
Digital Inputs24
Operating Voltage24V DC
On-state Voltage15V 30V DC
On-state Current3.5 mA at 24V DC
Outputs8
Output Voltage Range? L+ minus 2V
Output Current0.5-1 A
Counters2
Inputs per Counter3
Counter Resolution24 bit
Analog Inputs8
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1753-L32BBBM-8A
Product TypeSafety Controller
Product SeriesGuardPLC 1800
User Memory250 KB user program memory
Digital Inputs24
Operating Voltage24V DC
On-state Voltage15V 30V DC
On-state Current3.5 mA at 24V DC
Outputs8
Output Voltage Range? L+ minus 2V
Output Current0.5-1 A
Counters2
Inputs per Counter3
Counter Resolution24 bit
Analog Inputs8
s

About 1753-L32BBBM-8A

The Allen-Bradley 1753-L32BBBM-8A is a Safety Controller from GuardPLC 1800 series. This controller has the most I/O points among GuardPLC controllers. It is equipped with 32 I/O points (24 inputs and 8 outputs, none of which are electrically isolated). Output channels 4 and 8 can withstand 1 Amp of current at 60 degrees Celsius and the other channels are 0.5 Amps rated. The 1753-L32BBBM-8A controller also has 2 (not electrically isolated) high-speed counters with a 24-bit resolution. There are 250 KB of user program memory and 250 KB of application data memory installed to support microprocessor in fault processing. This device will detect a fault in their controlling system behavior and put all affected inputs and outputs from the faulty module to the safety state.



The special feature of the 1753-L32BBBM-8A GuardPLC 1800 controller is the Modbus Communication option. Users can exchange signal values and other data with another industrial automation devices by using this communication protocol. The Allen-Bradley 1753-L32BBBM-8A is designed to be connected to a 24 Volts DC/8 Amps power source. It is shipped in an IP20 protected housing with dimensions of 114 millimeters (4.49 inches) x 257 millimeters (10.1 inches) x 80 millimeters (3.15 inches) including the shield plate. Its weight is approximated at 2.6 pounds (1.2 kilograms). Do not use this device outside of the 0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit) temperature range. The controller has passed rigorous tests to be certified by CE, C-Tick, and c-UL-us standards.

Technical Description of 1753-L32BBBM-8A

The Allen-Bradley 1753-L32BBBM-8A Safety Controller in the GuardPLC 1800 series has 24 Digital Inputs and a 250 KB User Memory. The 1753-L32BBBM-8A operates with a 24V DC Operating Voltage and a 15V 30V DC On-state Voltage.

Repair Services for 1753-L32BBBM-8A

Type Lead Time Price Action
Repair Service 2-4 weeks $9640cartAdd to Cart

Our highly skilled technicians can repair your 1753-L32BBBM-8A. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for 1753-L32BBBM-8A

Please refer to the manual for more information about the 1753-L32BBBM-8A such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1753-L32BBBM-8A Ser A
1753-L32BBBM-8A/A, Series A, Rev A Request Quote
Common misspellings:
  • l753-L32BBBM-8A
  • 1753-132BBBM-8A
  • 1753-L328BBM-8A
  • 1753-L32B8BM-8A
  • 1753-L32BB8M-8A
  • 1753-L32BBBM-bA
  • 1753L32BBBM8A

Dimensions For 1753-L32BBBM-8A

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1753-L32BBBM-8A

Resolutions For 1753-L32BBBM-8A

About

Technical Specifications for 1753-L32BBBM-8A

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1753-L32BBBM-8A
Product TypeSafety Controller
Product SeriesGuardPLC 1800
User Memory250 KB user program memory
Digital Inputs24
Operating Voltage24V DC
On-state Voltage15V 30V DC
On-state Current3.5 mA at 24V DC
Outputs8
Output Voltage Range? L+ minus 2V
Output Current0.5-1 A
Counters2
Inputs per Counter3
Counter Resolution24 bit
Analog Inputs8
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1753-L32BBBM-8A
Product TypeSafety Controller
Product SeriesGuardPLC 1800
User Memory250 KB user program memory
Digital Inputs24
Operating Voltage24V DC
On-state Voltage15V 30V DC
On-state Current3.5 mA at 24V DC
Outputs8
Output Voltage Range? L+ minus 2V
Output Current0.5-1 A
Counters2
Inputs per Counter3
Counter Resolution24 bit
Analog Inputs8

About 1753-L32BBBM-8A

The Allen-Bradley 1753-L32BBBM-8A is a Safety Controller from GuardPLC 1800 series. This controller has the most I/O points among GuardPLC controllers. It is equipped with 32 I/O points (24 inputs and 8 outputs, none of which are electrically isolated). Output channels 4 and 8 can withstand 1 Amp of current at 60 degrees Celsius and the other channels are 0.5 Amps rated. The 1753-L32BBBM-8A controller also has 2 (not electrically isolated) high-speed counters with a 24-bit resolution. There are 250 KB of user program memory and 250 KB of application data memory installed to support microprocessor in fault processing. This device will detect a fault in their controlling system behavior and put all affected inputs and outputs from the faulty module to the safety state.



The special feature of the 1753-L32BBBM-8A GuardPLC 1800 controller is the Modbus Communication option. Users can exchange signal values and other data with another industrial automation devices by using this communication protocol. The Allen-Bradley 1753-L32BBBM-8A is designed to be connected to a 24 Volts DC/8 Amps power source. It is shipped in an IP20 protected housing with dimensions of 114 millimeters (4.49 inches) x 257 millimeters (10.1 inches) x 80 millimeters (3.15 inches) including the shield plate. Its weight is approximated at 2.6 pounds (1.2 kilograms). Do not use this device outside of the 0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit) temperature range. The controller has passed rigorous tests to be certified by CE, C-Tick, and c-UL-us standards.

Technical Description of 1753-L32BBBM-8A

The Allen-Bradley 1753-L32BBBM-8A Safety Controller in the GuardPLC 1800 series has 24 Digital Inputs and a 250 KB User Memory. The 1753-L32BBBM-8A operates with a 24V DC Operating Voltage and a 15V 30V DC On-state Voltage.
Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks $9640cartAdd to Cart

Our highly skilled technicians can repair your 1753-L32BBBM-8A. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks $9640cartAdd to Cart

Our highly skilled technicians can repair your 1753-L32BBBM-8A. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the 1753-L32BBBM-8A such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1753-L32BBBM-8A Ser A
1753-L32BBBM-8A/A, Series A, Rev A Request Quote

Common misspellings:
  • l753-L32BBBM-8A
  • 1753-132BBBM-8A
  • 1753-L328BBM-8A
  • 1753-L32B8BM-8A
  • 1753-L32BB8M-8A
  • 1753-L32BBBM-bA
  • 1753L32BBBM8A
PDF