1753-L32BBBP-8A | Allen Bradley PLC GuardPLC

1753-L32BBBP-8A

1753-L32BBBP-8A

Revisions: Ser A 
Description: The Allen-Bradley 1753-L32BBBP-8A Safety Controller in the GuardPLC 1800 series has 24 Digital Inputs and a 250 KB User Memory. The 1753-L32BBBP-8A operates with a 24V DC Operating Voltage and a 15V 30V DC On-state Voltage.
Rated 4.8 with 20 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Available Now

Submit RFQ for 1753-L32BBBP-8A

Add more parts to quote

Description: The Allen-Bradley 1753-L32BBBP-8A Safety Controller in the GuardPLC 1800 series has 24 Digital Inputs and a 250 KB User Memory. The 1753-L32BBBP-8A operates with a 24V DC Operating Voltage and a 15V 30V DC On-state Voltage.

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: Ser A 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1753-L32BBBP-8A.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.8 with 20 reviews

    Technical Specifications for 1753-L32BBBP-8A

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1753-L32BBBP-8A
Product TypeSafety Controller
Product SeriesGuardPLC 1800
User Memory250 KB user program memory
Digital Inputs24
Operating Voltage24V DC
On-state Voltage15V 30V DC
On-state Current3.5 mA at 24V DC
Outputs8
Output Voltage Range? L+ minus 2V
Output Current0.5-1 A
Counters2
Inputs per Counter3
Counter Resolution24 bit
Analog Inputs8
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1753-L32BBBP-8A
Product TypeSafety Controller
Product SeriesGuardPLC 1800
User Memory250 KB user program memory
Digital Inputs24
Operating Voltage24V DC
On-state Voltage15V 30V DC
On-state Current3.5 mA at 24V DC
Outputs8
Output Voltage Range? L+ minus 2V
Output Current0.5-1 A
Counters2
Inputs per Counter3
Counter Resolution24 bit
Analog Inputs8
s

About 1753-L32BBBP-8A

The Allen Bradley 1753-L32BBBP-8A is a GuardPLC controller and a programmable electronic system with up to 24 digital inputs, two counters, eight digital outputs, four connections, and eight analog inputs designed for GuardPLC Ethernet communication. The status of these 24 digital inputs is shown through the status indicators when the controller is put in a RUN mode. The LS+ voltage source provides 24 Volts DC for up to eight dry contact inputs. The GuardPLC 1800 controllers are available in three groups. Based on IEC 61131-3, the OS is loaded in the central unit of 1753-L32BBBP-8A GuardPLC controller and need to be used in the valid, TUV-certified form required for the safety-related applications.



The line break and short-circuit monitoring system, such as the E-stop inputs, can’t be configured for the 1753-L32BBBP-8A GuardPLC 1800 controller, because the 24 discrete inputs include analog inputs with a one-bit resolution. This GuardPLC controller offers high-speed counter connections. 1753-L32BBBP-8A have two independent high-speed counters of 24-bit. They are configured for 5 or 24 Volts DC, with a maximum input frequency of 100 KHz. These counters can be used or as a decoder or a counter for the 3-bit Gray Code inputs. When used as a counter, the counter input is input A, the counter direction input is input B, and input Z is used to reset the system to default.

Repair Services for 1753-L32BBBP-8A

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1753-L32BBBP-8A. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for 1753-L32BBBP-8A

Please refer to the manual for more information about the 1753-L32BBBP-8A such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1753-L32BBBP-8A Ser A
1753-L32BBBP-8A/A, Series A, Rev A Request Quote
Common misspellings:
  • l753-L32BBBP-8A
  • 1753-132BBBP-8A
  • 1753-L328BBP-8A
  • 1753-L32B8BP-8A
  • 1753-L32BB8P-8A
  • 1753-L32BBBP-bA
  • 1753L32BBBP8A

Dimensions For 1753-L32BBBP-8A

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1753-L32BBBP-8A

Resolutions For 1753-L32BBBP-8A

About

Technical Specifications for 1753-L32BBBP-8A

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1753-L32BBBP-8A
Product TypeSafety Controller
Product SeriesGuardPLC 1800
User Memory250 KB user program memory
Digital Inputs24
Operating Voltage24V DC
On-state Voltage15V 30V DC
On-state Current3.5 mA at 24V DC
Outputs8
Output Voltage Range? L+ minus 2V
Output Current0.5-1 A
Counters2
Inputs per Counter3
Counter Resolution24 bit
Analog Inputs8
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1753-L32BBBP-8A
Product TypeSafety Controller
Product SeriesGuardPLC 1800
User Memory250 KB user program memory
Digital Inputs24
Operating Voltage24V DC
On-state Voltage15V 30V DC
On-state Current3.5 mA at 24V DC
Outputs8
Output Voltage Range? L+ minus 2V
Output Current0.5-1 A
Counters2
Inputs per Counter3
Counter Resolution24 bit
Analog Inputs8

About 1753-L32BBBP-8A

The Allen Bradley 1753-L32BBBP-8A is a GuardPLC controller and a programmable electronic system with up to 24 digital inputs, two counters, eight digital outputs, four connections, and eight analog inputs designed for GuardPLC Ethernet communication. The status of these 24 digital inputs is shown through the status indicators when the controller is put in a RUN mode. The LS+ voltage source provides 24 Volts DC for up to eight dry contact inputs. The GuardPLC 1800 controllers are available in three groups. Based on IEC 61131-3, the OS is loaded in the central unit of 1753-L32BBBP-8A GuardPLC controller and need to be used in the valid, TUV-certified form required for the safety-related applications.



The line break and short-circuit monitoring system, such as the E-stop inputs, can’t be configured for the 1753-L32BBBP-8A GuardPLC 1800 controller, because the 24 discrete inputs include analog inputs with a one-bit resolution. This GuardPLC controller offers high-speed counter connections. 1753-L32BBBP-8A have two independent high-speed counters of 24-bit. They are configured for 5 or 24 Volts DC, with a maximum input frequency of 100 KHz. These counters can be used or as a decoder or a counter for the 3-bit Gray Code inputs. When used as a counter, the counter input is input A, the counter direction input is input B, and input Z is used to reset the system to default.

Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1753-L32BBBP-8A. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1753-L32BBBP-8A. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the 1753-L32BBBP-8A such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1753-L32BBBP-8A Ser A
1753-L32BBBP-8A/A, Series A, Rev A Request Quote

Common misspellings:
  • l753-L32BBBP-8A
  • 1753-132BBBP-8A
  • 1753-L328BBP-8A
  • 1753-L32B8BP-8A
  • 1753-L32BB8P-8A
  • 1753-L32BBBP-bA
  • 1753L32BBBP8A
PDF