Free UPS Ground on All Orders!
+1 (919) 205-4392
Allen Bradley GuardPLC 1753-OW8

Product image is representative; revision or series may vary. Contact us to request a specific version.

1753-OW8

|

The Allen-Bradley 1753-OW8 Relay Output Module in the Distributed I/O series has 8 Relay Outputs and 2 x RJ-45, 10/100BaseT (with 100 Mbps) with integrated switch Guard PLC Ethernet Interfaces. The 1753-OW8 operates with a 24V DC Operating Voltage and a ? 10 ms Response Time.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1753-OW8

ManufacturerAllen Bradley
Product TypeRelay Output Module
Product LineGuardPLC
Part Number1753-OW8
Weight2.63 lbs (1.19 kg)
Product SeriesDistributed I/O
Guard PLC Ethernet Interfaces2 x RJ-45, 10/100BaseT (with 100 Mbps) with integrated switch
Relay Outputs8
Operating Voltage24V DC
Response Time? 10 ms
Current Consumption0.6 A max.
Isolation VoltageNo Isolation Between Circuits
Terminal Block Torque0.51 Nm
Output Switching Voltage? 5V, ? 250V AC/250V DC
Output Switching Current24V DC @ 1 A resistive load
Enclosure TypeIP20

The 1753-OW8 relay output module is a distributed I/O module with 8 relay outputs developed by Allen-Bradley and Rockwell Automation. The module is intended for use with controllers from the GuardPLC series and it is suitable for use in industrial environments. Just like all the other modules for GuardPLC controllers, the 1753-OW8 was also carefully developed and manufactured with special attention paid to the safety features which were the top priority during this process. The underlying safety concept of the GuardPLC line of products is the fail-safe feature and the controllers’ CPUs that comply with the IEC 61508 (SIL 3) and ISO 13849-1 (PLe/Cat. 4) safety standards. The user can determine the safety time if faults that could lead to loss of safety functions occur. Also, the 1753-OW8 can be set to detect multiple faults within 24 hours. Should an error be detected, the controller could still work in a safe mode until the problem is solved. If any faults occur, including those related to Ethernet communication, all outputs are automatically switched off and are de-energized in a safe state.

The module is meant to be mounted horizontally and in spaces with unconstrained air flow. If the module is placed in tight spaces with no proper ventilation, the use of an additional fan is recommended. In addition, it should be noted that any other obstacles need to be installed at a distance of 100 millimeters (3.94 inches) minimum above and below the module. The terminal connections of the module fulfill the requirements of the IP20 protection standards and it can even meet the higher requirements if the 1753-OW8 is mounted in an enclosure. The 1753-OW8 incorporates a GuardPLC Ethernet interface through 2 RJ45/10/100BaseT ports with 100 Megabits per second and an integrated switch. The module operates on 24 Volts DC input voltage and it has a current consumption of 0.6 Amps for the maximum load. The approximate dimensions of the module include a width of 207 millimeters (8.14 inches), a height of 114 millimeters (4.49 inches) and a depth of 86 millimeters (3.38 inches). The module weighs around 1.3 kilograms (3.47 pounds). The environmental attributes include a temperature range of -40 and 85 degrees Celsius (non-operating) and a temperature range of 0 and 60 degrees Celsius when operating.

Revision Part #Also known as
1753-OW8 Ser A1753-OW8/A, Series A, Rev A
Don't see your particular revision? Contact us now.