100-D110EN00

The Allen-Bradley 100-D110EN00 contactor is a 3-pole contactor from the Bulletin 100-D series. As a Bulletin 100-D series contactor, it can only be panel mounted. The 100-D contactors support AC or DC coil control. They also support either conventional or electronic coils. A 100-D series contactor with an electronic coil like the 100-D110EN00 contactor comes with an integrated PLC interface. The 100-D contactors support 115 to 860 Amps current ratings. Accessories for 100-D contactors like the 100-D110EN00 contactor include surge suppressors, IP20-rated terminal blocks, terminal covers, and terminal shields. The 100-D contactors are approved and certified by UL CSA, IEC, and CE standards. The 100-D110EN00 contactor is a 3-pole contactor with a current rating of 110 Amps. The contactor’s electronic coil is rated for 110 to 120 Volts DC. It is suitable for use on a circuit capable of delivering a maximum of 10,000 Volts rms.

The recommended maximum fuse size for the Allen-Bradley Bulletin 100-D series 100-D110EN00 contactor is 250 Amps and the recommended maximum circuit breaker size is 150 Amps. Allen-Bradley recommends use of 75 degrees Celsius-rated copper wire for the terminations on the contactor. The maximum voltage rating of the 100-D110EN00 contactor is 600 Volts AC. The impulse voltage rating for the contactor is 12 kilovolts. At 3-phase AC voltage, the output power ratings supported by the 100-D110EN00 contactor are 34 kilowatts at 230 Volts, 61 kilowatts at 400 Volts, and 106 kilowatts at 690 Volts. For single-phase AC voltage, the power ratings for the contactor are 10 Horsepower at 115 Volts and 25 Horsepower at 230 Volts. The storage temperature range is -40 to 80 degrees Celsius. The working temperature range is -25 to 60 degrees Celsius. The maximum recommended operating altitude is 2000 meters above sea level.