100-D180A11 | Allen Bradley PLC IEC 100 Contactors

100-D180A11

100-D180A11

Description:

The Allen-Bradley 100-D180A11 AC contactor has been designed to operate with industrial motors that are AC rated. This contactor comes with one normally open auxiliary contact and one normally closed auxiliary contact. Both auxiliary contacts can act as “mirror contacts.”

Rated 4.9 with 6 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Available Now

Submit RFQ for 100-D180A11

Add more parts to quote

Description:

The Allen-Bradley 100-D180A11 AC contactor has been designed to operate with industrial motors that are AC rated. This contactor comes with one normally open auxiliary contact and one normally closed auxiliary contact. Both auxiliary contacts can act as “mirror contacts.”


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 100-D180A11.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.9 with 6 reviews

    Technical Specifications for 100-D180A11

BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-D180A11
Type of ComponentContactor
Operating ModeNon-Reversing
Poles3
Voltage TypeStandard AC Voltage
Coil Voltage Range 220-240V AC
Frequency50-60 Hz
Current at 40 degrees Celsius250 Amps
Current at 60 degrees Celsius180 Amps
Auxiliary Contacts1 N.O., 1 N.C.
PLC InterfaceNone
BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-D180A11
Type of ComponentContactor
Operating ModeNon-Reversing
Poles3
Voltage TypeStandard AC Voltage
Coil Voltage Range 220-240V AC
Frequency50-60 Hz
Current at 40 degrees Celsius250 Amps
Current at 60 degrees Celsius180 Amps
Auxiliary Contacts1 N.O., 1 N.C.
PLC InterfaceNone
s

About 100-D180A11

The 100-D180A11 contactor is an AC contactor that comes from the IEC 100 Contactors and Bulletin 100-D series by Allen-Bradley. This series provides different contactors that are suitable for different applications with reversing or non-reversing types of AC motors. This specific contactor, the 100-D180A11 contactor, operates only in non-reversing systems with AC voltage. The AC coil voltage rating of this contactor ranges from 220 to 230 Volts AC at a frequency of 50 Hertz and it is 240 Volts AC at a frequency of 60 Hertz. The motors and other equipment involved in the system need to be compatible with this voltage and frequency range so that operations run smoothly at all times. The Allen-Bradley 100-D180A11 AC contactor can be installed on a panel only and it cannot support a PLC interface.



 



The Allen-Bradley 100-D180A11 Bulletin 100-D AC contactor comes with 3 poles that operate with gold-plated conventional coils. In addition, the contactor comes with one normally open auxiliary contact and one normally closed auxiliary contact that operate alongside each other and which together can perform a mirror contact function. With the mirror contact function, the close contact is not affected by power variances directly applied to the power poles. The Allen-Bradley 100-D180A11 AC contactor operates with a current rating of 180 Amps at 60 degrees Celsius, which is the maximum operating temperature recommended for this contactor. If the operating temperature is higher than 60 degrees Celsius, the current rating of the contactor must be derated by at least 15 percent to allow the contactor to operate safely at up to 70 degrees Celsius. The contactor does not include any housing or enclosure for protection, and it is recommended to keep it away from liquids and away from corrosive materials, vapors, or gases.



Repair Services for 100-D180A11

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-D180A11. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 100-D180A11

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 100-D180A11

Resolutions For 100-D180A11

About

Technical Specifications for 100-D180A11

BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-D180A11
Type of ComponentContactor
Operating ModeNon-Reversing
Poles3
Voltage TypeStandard AC Voltage
Coil Voltage Range 220-240V AC
Frequency50-60 Hz
Current at 40 degrees Celsius250 Amps
Current at 60 degrees Celsius180 Amps
Auxiliary Contacts1 N.O., 1 N.C.
PLC InterfaceNone
BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-D180A11
Type of ComponentContactor
Operating ModeNon-Reversing
Poles3
Voltage TypeStandard AC Voltage
Coil Voltage Range 220-240V AC
Frequency50-60 Hz
Current at 40 degrees Celsius250 Amps
Current at 60 degrees Celsius180 Amps
Auxiliary Contacts1 N.O., 1 N.C.
PLC InterfaceNone

About 100-D180A11

The 100-D180A11 contactor is an AC contactor that comes from the IEC 100 Contactors and Bulletin 100-D series by Allen-Bradley. This series provides different contactors that are suitable for different applications with reversing or non-reversing types of AC motors. This specific contactor, the 100-D180A11 contactor, operates only in non-reversing systems with AC voltage. The AC coil voltage rating of this contactor ranges from 220 to 230 Volts AC at a frequency of 50 Hertz and it is 240 Volts AC at a frequency of 60 Hertz. The motors and other equipment involved in the system need to be compatible with this voltage and frequency range so that operations run smoothly at all times. The Allen-Bradley 100-D180A11 AC contactor can be installed on a panel only and it cannot support a PLC interface.



 



The Allen-Bradley 100-D180A11 Bulletin 100-D AC contactor comes with 3 poles that operate with gold-plated conventional coils. In addition, the contactor comes with one normally open auxiliary contact and one normally closed auxiliary contact that operate alongside each other and which together can perform a mirror contact function. With the mirror contact function, the close contact is not affected by power variances directly applied to the power poles. The Allen-Bradley 100-D180A11 AC contactor operates with a current rating of 180 Amps at 60 degrees Celsius, which is the maximum operating temperature recommended for this contactor. If the operating temperature is higher than 60 degrees Celsius, the current rating of the contactor must be derated by at least 15 percent to allow the contactor to operate safely at up to 70 degrees Celsius. The contactor does not include any housing or enclosure for protection, and it is recommended to keep it away from liquids and away from corrosive materials, vapors, or gases.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-D180A11. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-D180A11. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF