Allen Bradley IEC 100 contactors are efficient, compact, and powerful contactors used to regulate motors and other loads in a variety of commercial and light industrial applications. The IEC 100 contactors series includes direct-on-line and reversing contactors, contactors with integrated surge suppression, and AC and DC coil control options. The IEC 100 contactors are RoHS compliant and comply with IEC, UL, and CSA specifications. These contactors can support bimetallic or electronic optional overload relays.
Browse available units in our catalog of IEC 100 Contactors.
This auxiliary contact block supports a minimum switching current of 10 milliamperes and operates at a minimum voltage of 17 Volts. It is equipped with a side mounting position and utilizes screw term
This three-pole contactor operates with a coil voltage between 200 and 220 V AC. It works efficiently in frequency ranges from 50 Hz to 60 Hz. This model has no auxiliary contacts and features a screw
This 3-pole contactor comes equipped with three normally open (N.O.) main contacts along with one normally closed (N.C.) auxiliary contact. It is compatible with AC coils and is suitable for mounting
This contactor features a configuration of 3 normally open poles and has an auxiliary contact configuration of one normally open contact. It supports an operating frequency of 50 to 60 Hertz and can b
This DC contactor supports a short-circuit rating of 10 kA and adheres to IEC electrical standards. The unit is equipped with three poles and allows for bolt-in terminal connections. Mounting options
Designed for compatibility with 100-D Series contactors, this block supports a contact rating of 0.1 amperes at 250 volts and operates at frequencies between 50 and 60 Hz. It has a maximum operating v
This safety contactor operates at a current rating of 85 Amps and includes a bifurcated contact design. It consists of three poles and comes equipped with two normally open and two normally closed aux
This contactor is rated for a maximum operational current of 100 A under AC-1 conditions. It accepts a coil voltage within the range of 110 to 120 VAC. Designed for both DIN rail and panel mounting, t
The 100-JE contactor interface module is engineered for 100-C contactors featuring AC coils. It supports a rated frequency of 50 to 60 Hertz and is designed to withstand shock up to 50 G for brief dur
Supporting four poles, this contactor features four normally open contacts and no normally closed contacts. It is rated for an operational current of 9.0 A in AC-3 mode at 400 volts, and it can handle