2080-DNET20 | Allen Bradley PLC Micro 800

2080-DNET20

Rated 4.4 with 14 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

2080-DNET20

Revisions: Ser A 
Description: This Micro 800 Programmable Logic Controller’s specifications include a DeviceNet Scanner that can control up to 20 Nodes.
Call
Request a quote for 2080-DNET20

Description:

This Micro 800 Programmable Logic Controller’s specifications include a DeviceNet Scanner that can control up to 20 Nodes.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: Ser A 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 2080-DNET20.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.4 with 14 reviews

    Technical Specifications for 2080-DNET20

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.2080-DNET20
Product TypeDeviceNet Scanner
Dimensions HxWxD2.44 x 1.24 x 0.78 inches
Weight35 grams
DeviceNet Communication Rate (max.)500 Kbps at 75 meters
Number of Nodes max.20 for I/O operation
Network ProtocolI/O Slave Messaging: POll Command
Enclosure Type RatingNEMA IP20
Backplane Power Consumption50 mA at 24 Volts DC
DeviceNet Current24 Volts DC, 300 mA Class 2
Power Dissipation1.44 Watts
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.2080-DNET20
Product TypeDeviceNet Scanner
Dimensions HxWxD2.44 x 1.24 x 0.78 inches
Weight35 grams
DeviceNet Communication Rate (max.)500 Kbps at 75 meters
Number of Nodes max.20 for I/O operation
Network ProtocolI/O Slave Messaging: POll Command
Enclosure Type RatingNEMA IP20
Backplane Power Consumption50 mA at 24 Volts DC
DeviceNet Current24 Volts DC, 300 mA Class 2
Power Dissipation1.44 Watts
s

About 2080-DNET20

The Allen-Bradley 2080-DNET20 is a Micro800 Communication Module with DeviceNet Scanner. It is a plug-in module and can be snapped into Micro800 controller to increase its application capabilities. It provides higher performance to support explicit messaging to remote I/O and drives via fieldbus or a network by serving as both scanner and client. It is designed to scan various devices such as CompactBlock LDX, E1Plus overloads, PowerFlex drives, and stack lights.



The 2080-DNET20 module can control up to 20 nodes for I/O operation. It takes an area of 2.44 x 1.24 x 0.78 inches and weighs 35 grams. For communication, it supports DeviceNet with a maximum communication rate of 125 Kbps within a 420-meter distance and 250 Kbps within 200 meters, as well as 500 Kbps within a 75-meter distance. It has a 50 Volt (continuous) isolation voltage and a maximum power dissipation of 1.44 Watts. For wiring, 24 to 14 AWG solid or stranded copper wire rated at 75 degrees Celsius (167 degrees Fahrenheit) or greater with 1.2 millimeters (3/64 inches) maximum insulation is used. It can be plugged into any slot of the Micro800 controller. The 2080-DNET20 module supports 2 LED indicators indicating module and network status with a green and a red light. It is configured using user-defined function blocks (UDFBs) to add nodes into the scan list. Only one of these modules should be used for each Micro800 controller.



Repair Services for 2080-DNET20

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 2080-DNET20. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for 2080-DNET20

Please refer to the manual for more information about the 2080-DNET20 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
2080-DNET20 Ser A
2080-DNET20/A, Series A, Rev A Request Quote
Common misspellings:
  • 2o80-DNET20
  • 20b0-DNET20
  • 208o-DNET20
  • 2080-DNET2o
  • 2080DNET20

Dimensions For 2080-DNET20

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 2080-DNET20

Resolutions For 2080-DNET20

About

Technical Specifications for 2080-DNET20

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.2080-DNET20
Product TypeDeviceNet Scanner
Dimensions HxWxD2.44 x 1.24 x 0.78 inches
Weight35 grams
DeviceNet Communication Rate (max.)500 Kbps at 75 meters
Number of Nodes max.20 for I/O operation
Network ProtocolI/O Slave Messaging: POll Command
Enclosure Type RatingNEMA IP20
Backplane Power Consumption50 mA at 24 Volts DC
DeviceNet Current24 Volts DC, 300 mA Class 2
Power Dissipation1.44 Watts
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.2080-DNET20
Product TypeDeviceNet Scanner
Dimensions HxWxD2.44 x 1.24 x 0.78 inches
Weight35 grams
DeviceNet Communication Rate (max.)500 Kbps at 75 meters
Number of Nodes max.20 for I/O operation
Network ProtocolI/O Slave Messaging: POll Command
Enclosure Type RatingNEMA IP20
Backplane Power Consumption50 mA at 24 Volts DC
DeviceNet Current24 Volts DC, 300 mA Class 2
Power Dissipation1.44 Watts

About 2080-DNET20

The Allen-Bradley 2080-DNET20 is a Micro800 Communication Module with DeviceNet Scanner. It is a plug-in module and can be snapped into Micro800 controller to increase its application capabilities. It provides higher performance to support explicit messaging to remote I/O and drives via fieldbus or a network by serving as both scanner and client. It is designed to scan various devices such as CompactBlock LDX, E1Plus overloads, PowerFlex drives, and stack lights.



The 2080-DNET20 module can control up to 20 nodes for I/O operation. It takes an area of 2.44 x 1.24 x 0.78 inches and weighs 35 grams. For communication, it supports DeviceNet with a maximum communication rate of 125 Kbps within a 420-meter distance and 250 Kbps within 200 meters, as well as 500 Kbps within a 75-meter distance. It has a 50 Volt (continuous) isolation voltage and a maximum power dissipation of 1.44 Watts. For wiring, 24 to 14 AWG solid or stranded copper wire rated at 75 degrees Celsius (167 degrees Fahrenheit) or greater with 1.2 millimeters (3/64 inches) maximum insulation is used. It can be plugged into any slot of the Micro800 controller. The 2080-DNET20 module supports 2 LED indicators indicating module and network status with a green and a red light. It is configured using user-defined function blocks (UDFBs) to add nodes into the scan list. Only one of these modules should be used for each Micro800 controller.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 2080-DNET20. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 2080-DNET20. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the 2080-DNET20 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
2080-DNET20 Ser A
2080-DNET20/A, Series A, Rev A Request Quote

Common misspellings:
  • 2o80-DNET20
  • 20b0-DNET20
  • 208o-DNET20
  • 2080-DNET2o
  • 2080DNET20
PDF