Free UPS Ground on All Orders!
+1 (919) 205-4392
Allen Bradley Micro 800 2080-IF2

Product image is representative; revision or series may vary. Contact us to request a specific version.

2080-IF2

|

The Allen-Bradley/Rockwell Automation 2080-IF2 controller input module is a PLC or programmable logic controller input module. It has been designed and manufactured as part of the Micro 800 PLC series. The 2080-IF2 PLC input module can plug directly into a Micro 800 PLC to increase its input options and its application capabilities. It comes with 2 input channels that are single-ended and non-isolated. The 2080-IF2 PLC input module supports an input voltage range of 0 to 10 Volts DC and an input current range of 0 to 20 milliamps.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 2080-IF2

ManufacturerAllen Bradley
Product TypeAnalog Plug-in Module
Product LineMicro 800
Part Number2080-IF2
UPC885630058405
Weight0.06 lbs (0.03 kg)
Module TypeAnalog
Number of Single-Ended Inputs2
Analog Normal Operating Voltage Range0-10V DC
Analog Normal Operating Current Range0-20mA
Data Range0-65535
Repeatability+/- 0.1%
Update Time180ms per Enabled Channel
Input Group to Bus Isolation/Channel to Channel IsolationNon-Isolation
Operating Altitude2000m
Max. Cable Length10m

The Allen-Bradley 2080-IF2 is a Micro800 Analog Input Module. It is a plug-in module and can be snapped into a Micro800 controller, expanding its application capabilities without increasing its size. The Micro800 system can be customized according to user needs with embedded analog input. A single Micro800 controller can support up to 20 embedded analog inputs. The 2080-IF2 module contains 2 single-ended non-isolated inputs with an operating voltage of 0 – 10V DC and operating current of 0 – 20 mA. It has 12-bits unipolar resolution across a full range of the device. It has an overall accuracy of a 1% Full-Scale for voltage and current including offset, gain, non-linearity, and repeatability error. It has a channel update time of 180ms with no field input calibration requirement. It has 12-pin female terminal blocks for wiring. The cable used for wiring must have a maximum length of 10 meters. For installation, it can be plugged into any slot of the Micro800 controller. The 2080-IF2 module is intended for use in a clean and dry industrial environment with an operating temperature of -20-65 °C (-4-149 °F) 5-95% non-condensing relative-humidity and a 2000m operating altitude.

Revision Part #Also known as
2080-IF2 Ser A2080-IF2/A, Series A, Rev A
Don't see your particular revision? Contact us now.