DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Warranty: | 1 year DO Supply Warranty Included |
Shipping: | Worldwide shipping via UPS, DHL, and TNT |
Repairs: | We offer repair service for the 2080-MEMBAK-RTC. |
Exchange: | Exchange credit for your defective unit available. |
Conditions: | We sell preowned surplus and refurbished parts. |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 2080-MEMBAK-RTC |
Product Type | MemoryBackup and High Accuracy RTC |
Resolution READ_RTC | 1 s |
Accuracy | +/-5 sec/month @ 25* C |
Operating Altitude | 2000 m |
Compatibility | Not Supported on Micro820 Controllers |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 2080-MEMBAK-RTC |
Product Type | MemoryBackup and High Accuracy RTC |
Resolution READ_RTC | 1 s |
Accuracy | +/-5 sec/month @ 25* C |
Operating Altitude | 2000 m |
Compatibility | Not Supported on Micro820 Controllers |
The Allen-Bradley 2080-MEMBAK-RTC is a Micro800 series plug-in module featuring a memory backup feature and a real-time clock. It is a specialty type plug-in module manufactured by Rockwell Automation that also has a high-accuracy RTC and it supports removal and insertion under power (RIUP). The primary use of the 2080-MEMBAK-RTC module is to create a backup copy of a project in the controller while simultaneously adding a precision timestamp to it, without the need for calibration or periodic updates. This module does not function as data storage for datalog and recipe data, nor can it be used for additional Run-Time Programs. Note that the Micro810 and Micro820 controllers do not support the 2080-MEMBAK-RTC module and it can only be installed on the leftmost plug-in slot of the controller. Plug-in modules like the 2080-MEMBAK-RTC module allow you to extend the functions of the embedded I/O without sacrificing your controller’s footprint and it can also increase functionality in terms of communication.
A red status indicator is available on the 2080-MEMBAK-RTC and this indicator informs you if the startup cycle test of the module is in progress, back up is in progress, or when the battery is low. It has a mounting torque of 0.2 Nm or 1.48 lb•in and its terminal screw torque ranges from 0.22-0.25 Nm or 1.95-2.21 lb•in. The maximum surrounding air temperature of the 2080-MEMBAK-RTC drive is 65 oC, the operating temperature is -20-65 oC, and the non-operating temperature is -40-85 oC.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 2080-MEMBAK-RTC. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Please refer to the manual for more information about the 2080-MEMBAK-RTC such as the wiring diagrams, data sheets and migration or obsolescence details.
Revision Part # | Also Known as | Availability |
2080-MEMBAK-RTC Ser A
|
2080-MEMBAK-RTC/A, Series A, Rev A | Request Quote |
Size | |
Input Type | |
Panel Cutout Height | in mm |
Panel Cutout Width | in mm |
Terminal Height | in mm |
Terminal Width | in mm |
Terminal Overall Depth | in mm |
Terminal Mounted Depth | in mm |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 2080-MEMBAK-RTC |
Product Type | MemoryBackup and High Accuracy RTC |
Resolution READ_RTC | 1 s |
Accuracy | +/-5 sec/month @ 25* C |
Operating Altitude | 2000 m |
Compatibility | Not Supported on Micro820 Controllers |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 2080-MEMBAK-RTC |
Product Type | MemoryBackup and High Accuracy RTC |
Resolution READ_RTC | 1 s |
Accuracy | +/-5 sec/month @ 25* C |
Operating Altitude | 2000 m |
Compatibility | Not Supported on Micro820 Controllers |
The Allen-Bradley 2080-MEMBAK-RTC is a Micro800 series plug-in module featuring a memory backup feature and a real-time clock. It is a specialty type plug-in module manufactured by Rockwell Automation that also has a high-accuracy RTC and it supports removal and insertion under power (RIUP). The primary use of the 2080-MEMBAK-RTC module is to create a backup copy of a project in the controller while simultaneously adding a precision timestamp to it, without the need for calibration or periodic updates. This module does not function as data storage for datalog and recipe data, nor can it be used for additional Run-Time Programs. Note that the Micro810 and Micro820 controllers do not support the 2080-MEMBAK-RTC module and it can only be installed on the leftmost plug-in slot of the controller. Plug-in modules like the 2080-MEMBAK-RTC module allow you to extend the functions of the embedded I/O without sacrificing your controller’s footprint and it can also increase functionality in terms of communication.
A red status indicator is available on the 2080-MEMBAK-RTC and this indicator informs you if the startup cycle test of the module is in progress, back up is in progress, or when the battery is low. It has a mounting torque of 0.2 Nm or 1.48 lb•in and its terminal screw torque ranges from 0.22-0.25 Nm or 1.95-2.21 lb•in. The maximum surrounding air temperature of the 2080-MEMBAK-RTC drive is 65 oC, the operating temperature is -20-65 oC, and the non-operating temperature is -40-85 oC.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 2080-MEMBAK-RTC. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 2080-MEMBAK-RTC. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Please refer to the manual for more information about the 2080-MEMBAK-RTC such as the wiring diagrams, data sheets and migration or obsolescence details.
Revision Part # | Also Known as | Availability |
2080-MEMBAK-RTC Ser A
|
2080-MEMBAK-RTC/A, Series A, Rev A | Request Quote |