DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Warranty: | 1 year DO Supply Warranty Included |
Shipping: | Worldwide shipping via UPS, DHL, and TNT |
Repairs: | We offer repair service for the 2080-SERIALISOL. |
Exchange: | Exchange credit for your defective unit available. |
Conditions: | We sell preowned surplus and refurbished parts. |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 2080-SERIALISOL |
Product Type | Isolated Serial Port |
Mounting Torque | 0.2 Nm |
Terminal Screw Torque | 0.22-0.25 Nm |
Isolated Voltage | 500V AC |
Surrounding Air Temperature max. | 65* C |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 2080-SERIALISOL |
Product Type | Isolated Serial Port |
Mounting Torque | 0.2 Nm |
Terminal Screw Torque | 0.22-0.25 Nm |
Isolated Voltage | 500V AC |
Surrounding Air Temperature max. | 65* C |
The Allen-Bradley 2080-SERIALISOL Micro800 RS232/485 Isolated Serial Port Plug-in Module is an embedded RS-232/485 serial port plug-in for the Allen-Bradley Micro 800 Programmable Controller which is used for serially connected HMI devices over a short distance of 3m or less. The plug-in is compatible with the 1761-CBL-AM00 0.5m (1.5ft) cable that connects an 8-pin Mini DIN to another 8-pin Mini DIN, and it is compatible with the (1763-NC01 series A) 30cm (11.8in) cable that connects an 8-pin Mini DIN to a 6-pin RS-485 terminal block. It also uses the 1761-CBL-PM02 cable to connect the embedded serial to the PanelView Component HMI. The 2080-SERIALISOL can also support the Modbus RTU, ASCII, and the CIP Serial protocols.
The 2080-SERIALISOL module is installed by positioning it with the 8-Pin Terminal Block in front of the 2080 controller, and the module is snapped into place on the module bay by using M3 screws with a 0.22-0.25Nm (1.95-2.21lb-in) screw torque. The module has circuitry with 1.5 mm2 (16 AWG) stranded wire, and 1 mm2 (18 AWG) solid wire. It offers 500V AC voltage isolation, and it has a mounting torque of 0.2Nm (1.48lb-in). The 2080-SERIALISOL can operate at a temperature range between -20 and 65 ºC (-4 and 149 ºF) at a 5-95% range of non-condensing relative humidity, and the module can be stored in an environment with an ambient temperature between -40 and 85 ºC (-40 and 185 ºF). It has a designated T4 (North America) Temperature code, and it is C-TICK, CE, and cUL-us certified.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | $103 | ![]() |
Our highly skilled technicians can repair your 2080-SERIALISOL. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Please refer to the manual for more information about the 2080-SERIALISOL such as the wiring diagrams, data sheets and migration or obsolescence details.
Revision Part # | Also Known as | Availability |
2080-SERIALISOL Ser A
|
2080-SERIALISOL/A, Series A, Rev A | Request Quote |
Size | |
Input Type | |
Panel Cutout Height | in mm |
Panel Cutout Width | in mm |
Terminal Height | in mm |
Terminal Width | in mm |
Terminal Overall Depth | in mm |
Terminal Mounted Depth | in mm |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 2080-SERIALISOL |
Product Type | Isolated Serial Port |
Mounting Torque | 0.2 Nm |
Terminal Screw Torque | 0.22-0.25 Nm |
Isolated Voltage | 500V AC |
Surrounding Air Temperature max. | 65* C |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 2080-SERIALISOL |
Product Type | Isolated Serial Port |
Mounting Torque | 0.2 Nm |
Terminal Screw Torque | 0.22-0.25 Nm |
Isolated Voltage | 500V AC |
Surrounding Air Temperature max. | 65* C |
The Allen-Bradley 2080-SERIALISOL Micro800 RS232/485 Isolated Serial Port Plug-in Module is an embedded RS-232/485 serial port plug-in for the Allen-Bradley Micro 800 Programmable Controller which is used for serially connected HMI devices over a short distance of 3m or less. The plug-in is compatible with the 1761-CBL-AM00 0.5m (1.5ft) cable that connects an 8-pin Mini DIN to another 8-pin Mini DIN, and it is compatible with the (1763-NC01 series A) 30cm (11.8in) cable that connects an 8-pin Mini DIN to a 6-pin RS-485 terminal block. It also uses the 1761-CBL-PM02 cable to connect the embedded serial to the PanelView Component HMI. The 2080-SERIALISOL can also support the Modbus RTU, ASCII, and the CIP Serial protocols.
The 2080-SERIALISOL module is installed by positioning it with the 8-Pin Terminal Block in front of the 2080 controller, and the module is snapped into place on the module bay by using M3 screws with a 0.22-0.25Nm (1.95-2.21lb-in) screw torque. The module has circuitry with 1.5 mm2 (16 AWG) stranded wire, and 1 mm2 (18 AWG) solid wire. It offers 500V AC voltage isolation, and it has a mounting torque of 0.2Nm (1.48lb-in). The 2080-SERIALISOL can operate at a temperature range between -20 and 65 ºC (-4 and 149 ºF) at a 5-95% range of non-condensing relative humidity, and the module can be stored in an environment with an ambient temperature between -40 and 85 ºC (-40 and 185 ºF). It has a designated T4 (North America) Temperature code, and it is C-TICK, CE, and cUL-us certified.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | $103 | ![]() |
Our highly skilled technicians can repair your 2080-SERIALISOL. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | $103 | ![]() |
Our highly skilled technicians can repair your 2080-SERIALISOL. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Please refer to the manual for more information about the 2080-SERIALISOL such as the wiring diagrams, data sheets and migration or obsolescence details.
Revision Part # | Also Known as | Availability |
2080-SERIALISOL Ser A
|
2080-SERIALISOL/A, Series A, Rev A | Request Quote |