2080-LC30-24QBB - In Stock | Allen Bradley PLC Micro 830

2080-LC30-24QBB

Rated 4.8 with 11 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

2080-LC30-24QBB

Revisions: Ser A 
Description: The 2080-LC30-24QBB programmable controller is an Allen-Bradley/Rockwell Automation controller from the Micro 830 controller series. It is a 24-point type of programmable controller. The 2080-LC30-24QBB programmable controller?s 24 I/O points are 14 inputs and 10 outputs. Its dimensions are 90 x 150 x 80 millimeters and its approximate weight is 0.423 kilograms. The 2080-LC30-24QBB programmable controller has an environmental protection rating of IP 20.
In Stock Ships Today
Request a quote for 2080-LC30-24QBB

Description: The 2080-LC30-24QBB programmable controller is an Allen-Bradley/Rockwell Automation controller from the Micro 830 controller series. It is a 24-point type of programmable controller. The 2080-LC30-24QBB programmable controller?s 24 I/O points are 14 inputs and 10 outputs. Its dimensions are 90 x 150 x 80 millimeters and its approximate weight is 0.423 kilograms. The 2080-LC30-24QBB programmable controller has an environmental protection rating of IP 20.

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: Ser A 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 2080-LC30-24QBB.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.8 with 11 reviews

    Technical Specifications for 2080-LC30-24QBB

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.2080-LC30-24QBB
Product TypeProgrammable Logic Controller
Inputs14
Input Type24V DC/AC
Outputs10
Output Type24V Source
Motion Axis2 PTO
HSC4 HSC
Max. Digital I/O48
Plug-In Slots3
Base Serial PortRS-232/485 non-Isolated
Dimensions HxWxD 90 x 145 x 80 milimeters
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.2080-LC30-24QBB
Product TypeProgrammable Logic Controller
Inputs14
Input Type24V DC/AC
Outputs10
Output Type24V Source
Motion Axis2 PTO
HSC4 HSC
Max. Digital I/O48
Plug-In Slots3
Base Serial PortRS-232/485 non-Isolated
Dimensions HxWxD 90 x 145 x 80 milimeters
s

About 2080-LC30-24QBB

The Allen-Bradley™ Micro830 Logic Controller, 2080-LC30-24QBB, is a cost-effective control solution for end-users and machine builders’ small applications.  It has fourteen (14) 24-Volt DC/AC inputs and ten (10) 24-Volt output points.  The maximum digital I/O that can be achieved on this controller is 48. The 2080-LC30-24QBB features four High Speed Counter (abbreviated to HSC) inputs, plug-in slots that can be customised according to user needs, Modbus RTU protocols for the serial ports, an integrated and non-isolated USB 2.0 port for programming (using any standard USB printer cable), a non-isolated serial port (RS232/485), and high speed input interrupts.  It does not have a base Ethernet/IP port. As many as three plug-in modules can be easily incorporated into this controller; machine builders can easily customize the controller through these plug-in modules and increase machine functionality without increasing the controller’s footprint.



 The maximum number of program steps (or instructions) and data (bytes) is 10 Ksteps and 20 Kbytes respectively.  Its integrated motion capabilities with 2 axes of motion enables the following motion instructions: up to two 100KHz Pulse Train Outputs (PTO) for low cost wiring to servo drives and steppers, TouchProbe instruction (a more precise method of registering the position of an axis, as opposed to using interrupts), and single axis moves that are supported via Motion Function Blocks.  Motion is made easier through MoveVelocity, home and position instructions, and graphical configuration of motion parameters.  As with all members of the Micro 800 family, this controller’s password protection feature is provided for enhanced security.



Power is supplied to the 2080-LC30-24QBB via a base unit with a 24 Volt DC power supply.  In addition, there is provision for an optional external 120 to 240 Volts AC power supply.  The minimum and maximum operating temperatures for this unit are -20 degrees Celsius and 65 degrees Celsius, respectively.

Technical Description of 2080-LC30-24QBB

This Micro 830 Logic Controller has 14-24V DC/V AC Input, 10-24V DC Source Output.

Repair Services for 2080-LC30-24QBB

Type Lead Time Price Action
Repair Service 2-4 weeks $700cartAdd to Cart

Our highly skilled technicians can repair your 2080-LC30-24QBB. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for 2080-LC30-24QBB

Please refer to the manual for more information about the 2080-LC30-24QBB such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
2080-LC30-24QBB Ser A
2080-LC30-24QBB/A, Series A, Rev A Request Quote
Common misspellings:
  • 2o80-LC30-24QBB
  • 20b0-LC30-24QBB
  • 208o-LC30-24QBB
  • 2080-1C30-24QBB
  • 2080-LC3o-24QBB
  • 2080-LC30-2AQBB
  • 2080-LC30-24Q8B
  • 2080-LC30-24QB8
  • 2080LC3024QBB

Dimensions For 2080-LC30-24QBB

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 2080-LC30-24QBB

Resolutions For 2080-LC30-24QBB

About

Technical Specifications for 2080-LC30-24QBB

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.2080-LC30-24QBB
Product TypeProgrammable Logic Controller
Inputs14
Input Type24V DC/AC
Outputs10
Output Type24V Source
Motion Axis2 PTO
HSC4 HSC
Max. Digital I/O48
Plug-In Slots3
Base Serial PortRS-232/485 non-Isolated
Dimensions HxWxD 90 x 145 x 80 milimeters
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.2080-LC30-24QBB
Product TypeProgrammable Logic Controller
Inputs14
Input Type24V DC/AC
Outputs10
Output Type24V Source
Motion Axis2 PTO
HSC4 HSC
Max. Digital I/O48
Plug-In Slots3
Base Serial PortRS-232/485 non-Isolated
Dimensions HxWxD 90 x 145 x 80 milimeters

About 2080-LC30-24QBB

The Allen-Bradley™ Micro830 Logic Controller, 2080-LC30-24QBB, is a cost-effective control solution for end-users and machine builders’ small applications.  It has fourteen (14) 24-Volt DC/AC inputs and ten (10) 24-Volt output points.  The maximum digital I/O that can be achieved on this controller is 48. The 2080-LC30-24QBB features four High Speed Counter (abbreviated to HSC) inputs, plug-in slots that can be customised according to user needs, Modbus RTU protocols for the serial ports, an integrated and non-isolated USB 2.0 port for programming (using any standard USB printer cable), a non-isolated serial port (RS232/485), and high speed input interrupts.  It does not have a base Ethernet/IP port. As many as three plug-in modules can be easily incorporated into this controller; machine builders can easily customize the controller through these plug-in modules and increase machine functionality without increasing the controller’s footprint.



 The maximum number of program steps (or instructions) and data (bytes) is 10 Ksteps and 20 Kbytes respectively.  Its integrated motion capabilities with 2 axes of motion enables the following motion instructions: up to two 100KHz Pulse Train Outputs (PTO) for low cost wiring to servo drives and steppers, TouchProbe instruction (a more precise method of registering the position of an axis, as opposed to using interrupts), and single axis moves that are supported via Motion Function Blocks.  Motion is made easier through MoveVelocity, home and position instructions, and graphical configuration of motion parameters.  As with all members of the Micro 800 family, this controller’s password protection feature is provided for enhanced security.



Power is supplied to the 2080-LC30-24QBB via a base unit with a 24 Volt DC power supply.  In addition, there is provision for an optional external 120 to 240 Volts AC power supply.  The minimum and maximum operating temperatures for this unit are -20 degrees Celsius and 65 degrees Celsius, respectively.

Technical Description of 2080-LC30-24QBB

This Micro 830 Logic Controller has 14-24V DC/V AC Input, 10-24V DC Source Output.
Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks $700cartAdd to Cart

Our highly skilled technicians can repair your 2080-LC30-24QBB. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks $700cartAdd to Cart

Our highly skilled technicians can repair your 2080-LC30-24QBB. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the 2080-LC30-24QBB such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
2080-LC30-24QBB Ser A
2080-LC30-24QBB/A, Series A, Rev A Request Quote

Common misspellings:
  • 2o80-LC30-24QBB
  • 20b0-LC30-24QBB
  • 208o-LC30-24QBB
  • 2080-1C30-24QBB
  • 2080-LC3o-24QBB
  • 2080-LC30-2AQBB
  • 2080-LC30-24Q8B
  • 2080-LC30-24QB8
  • 2080LC3024QBB
PDF