Free UPS Ground on All Orders!
+1 (919) 205-4392
Allen Bradley Micro 830 2080-LC30-48QBB

Product image is representative; revision or series may vary. Contact us to request a specific version.

2080-LC30-48QBB

|

The Allen-Bradley 2080-LC30-48QBB controller has been designed and manufactured as part of the Allen-Bradley Micro 830 series. This controller is a programmable controller that is equipped with 48 total input and output channels. The 2080-LC30-48QBB programmable controller?s 48 input and output channels include 20 outputs and 28 inputs. It weighs about 1.6 pounds and its dimensions are 3.15 x 9.06 x 3.54 inches. The 2080-LC30-48QBB programmable controller is protected by an IP 20 rated enclosure.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 2080-LC30-48QBB

ManufacturerAllen Bradley
Product TypeProgrammable Logic Controller
Product LineMicro 830
Part Number2080-LC30-48QBB
UPC885630058276
Weight1.88 lbs (0.85 kg)
Inputs28
Input Type24V DC/AC
Outputs20
Output Type24V Source
Motion Axis3 PTO
HSC6 HSC
Max. Digital I/O88
Plug-In Slots5
Base Serial PortRS-232/485 non-Isolated

The Allen Bradley part number 2080-LC30-48QBB is a Micro830 series Logic Controller, with a total of forty-eight (48) I/O, consisting of twenty-eight (28) 24 Volt AC/DC inputs and twenty (20) 24 Volt Source outputs.

The 2080-LC30-48QBB has total dimensions of 3.54 x 9.06 x 3.15 inches with a weight of 1.60 pounds. The wiring done for this unit must be completed in copper conductors only, either in stranded or solid copper wire with an insulation rated up to 90 degrees Celsius. Its terminal screw has a torque of around 0.6 Nm (or 4.4 pounds on an inch).

The 2080-LC30-48QBB controller has an input circuit of 12/24 Volts sink/source in a standard function and 24 Volts sink/source at high speed, whereas its output circuit type is 24 Volts DC source for both standard and high-speed functions. This unit consumes around 18.2 Watts; in its Off state, its maximum voltage is 5 Volts DC; it has an Off state minimum voltage of 4 Volts AC at 50 to 60 Hertz, and its maximum Off state current is 1.5 mA. In the module's On state, it has a minimum current of 1.8 mA at 10 Volts DC, a nominal current of 8.5 mA at 24 Volts DC, and a maximum current of 12 mA at 30 Volts DC. Additionally, it has an On state nominal voltage of 12/24 Volts AC at 50 or 60 Hertz.

The 2080-LC30-48QBB Micro830 controller meets the IP20 enclosure type ratings; its pilot duty rating is around C300, R150.

Revision Part #Also known as
2080-LC30-48QBB Ser A2080-LC30-48QBB/A, Series A, Rev A
Don't see your particular revision? Contact us now.