DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Description: The Allen Bradley Handheld Programmer for MicroLogix 1000 modules, which can be used for programming and troubleshooting modules.
The Allen Bradley Handheld Programmer for MicroLogix 1000 modules, which can be used for programming and troubleshooting modules.
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Warranty: | 1 year DO Supply Warranty Included |
Shipping: | Worldwide shipping via UPS, DHL, and TNT |
Repairs: | We offer repair service for the 1761-HHP-B30. |
Exchange: | Exchange credit for your defective unit available. |
Conditions: | We sell preowned surplus and refurbished parts. |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 1761-HHP-B30 |
Type | Hand-Held Programmer |
24V dc | Communication Cable |
UPC | 10662468489727 |
UNSPSC | 39121552 |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley 1761-HHP-B30 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1761-HHP-B30 units instead of migration.
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 1761-HHP-B30 |
Type | Hand-Held Programmer |
24V dc | Communication Cable |
UPC | 10662468489727 |
UNSPSC | 39121552 |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley 1761-HHP-B30 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1761-HHP-B30 units instead of migration.
sThe 1761-HHP-B30 is a hand-held programmer designed and manufactured by Allen-Bradley. The programmer has an operating power rating of 2.0 Watts, a minimum operating temperature of 0 degrees Celsius and a maximum operating temperature of 50 degrees Celsius. When being stored, the 1761-HHP-B30 has a minimum ambient temperature rating of -20 degrees Celsius and a maximum ambient temperature rating of 60 degrees Celsius. While in operation, the 1761-HHP-B30 can accommodate a vibration with a frequency of between 10 and 50 Hertz with a 0.76 millimeters displacement peak to peak. The Allen-Bradley 1761-HHP-B30 has an LCD that can show 16 characters on a 2-line display. Its keypad is made with rubber/carbon and it is color coded. The input voltage rating for the 1761-HHP-B30 stands at 24 Volts DC. The programmer has a width of 3.74 inches, a height of 6.69 inches, and a depth of 1.37 inches.
The 1761-HHP-B30 is interfaced with the MicroLogix 1000 controller through an RS-232 connection. This connection supports the DFI full duplex protocol. The DFI protocol allows for simultaneous transmissions between 2 devices in both directions. This allows for the control of messages, signal error detection, and for retries if errors are detected. The 1761-HHP-B30 has an operating shock rating of 50 g peak acceleration for a duration of 11 milliseconds plus or minus 1 millisecond. The handheld programmer is listed by the Underwriters Laboratories in Class 1 Division 2 groups A to D and it is CE marked. Note that the 1761-HHP-B30 cannot be interfaced with the controller through the AIC+.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | $979 | ![]() |
Our highly skilled technicians can repair your 1761-HHP-B30. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Please refer to the manual for more information about the 1761-HHP-B30 such as the wiring diagrams, data sheets and migration or obsolescence details.
Revision Part # | Also Known as | Availability |
1761-HHP-B30 Ser A
|
1761-HHP-B30/A, Series A, Rev A | Request Quote |
1761-HHP-B30 Ser B
|
1761-HHP-B30/B, Series B, Rev B | Request Quote |
1761-HHP-B30 Ser C
|
1761-HHP-B30/C, Series C, Rev C | Request Quote |
Size | |
Input Type | |
Panel Cutout Height | in mm |
Panel Cutout Width | in mm |
Terminal Height | in mm |
Terminal Width | in mm |
Terminal Overall Depth | in mm |
Terminal Mounted Depth | in mm |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 1761-HHP-B30 |
Type | Hand-Held Programmer |
24V dc | Communication Cable |
UPC | 10662468489727 |
UNSPSC | 39121552 |
Product Lifecycle Status* | Discontinued/Obsolete |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 1761-HHP-B30 |
Type | Hand-Held Programmer |
24V dc | Communication Cable |
UPC | 10662468489727 |
UNSPSC | 39121552 |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley 1761-HHP-B30 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1761-HHP-B30 units instead of migration.
The 1761-HHP-B30 is a hand-held programmer designed and manufactured by Allen-Bradley. The programmer has an operating power rating of 2.0 Watts, a minimum operating temperature of 0 degrees Celsius and a maximum operating temperature of 50 degrees Celsius. When being stored, the 1761-HHP-B30 has a minimum ambient temperature rating of -20 degrees Celsius and a maximum ambient temperature rating of 60 degrees Celsius. While in operation, the 1761-HHP-B30 can accommodate a vibration with a frequency of between 10 and 50 Hertz with a 0.76 millimeters displacement peak to peak. The Allen-Bradley 1761-HHP-B30 has an LCD that can show 16 characters on a 2-line display. Its keypad is made with rubber/carbon and it is color coded. The input voltage rating for the 1761-HHP-B30 stands at 24 Volts DC. The programmer has a width of 3.74 inches, a height of 6.69 inches, and a depth of 1.37 inches.
The 1761-HHP-B30 is interfaced with the MicroLogix 1000 controller through an RS-232 connection. This connection supports the DFI full duplex protocol. The DFI protocol allows for simultaneous transmissions between 2 devices in both directions. This allows for the control of messages, signal error detection, and for retries if errors are detected. The 1761-HHP-B30 has an operating shock rating of 50 g peak acceleration for a duration of 11 milliseconds plus or minus 1 millisecond. The handheld programmer is listed by the Underwriters Laboratories in Class 1 Division 2 groups A to D and it is CE marked. Note that the 1761-HHP-B30 cannot be interfaced with the controller through the AIC+.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | $979 | ![]() |
Our highly skilled technicians can repair your 1761-HHP-B30. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | $979 | ![]() |
Our highly skilled technicians can repair your 1761-HHP-B30. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Please refer to the manual for more information about the 1761-HHP-B30 such as the wiring diagrams, data sheets and migration or obsolescence details.
Revision Part # | Also Known as | Availability |
1761-HHP-B30 Ser A
|
1761-HHP-B30/A, Series A, Rev A | Request Quote |
1761-HHP-B30 Ser B
|
1761-HHP-B30/B, Series B, Rev B | Request Quote |
1761-HHP-B30 Ser C
|
1761-HHP-B30/C, Series C, Rev C | Request Quote |