Free UPS Ground on All Orders!
+1 (919) 205-4392
Allen Bradley MicroLogix 1000 1761-L16NWB

Product image is representative; revision or series may vary. Contact us to request a specific version.

1761-L16NWB

|

The 1761-L16NWB controller is an Allen-Bradley MicroLogix programmable controller that is available from the MicroLogix 1000 series. Its inputs can support both AC and DC excitation voltage. The on-state AC excitation voltage ratings for the 1761-L16NWB programmable controller are 18 Volts AC minimum, 24 Volts AC nominal, 26.4 Volts AC maximum at 131 degrees Fahrenheit, and 30 Volts AC maximum at 86 degrees Fahrenheit. Likewise, the on-state DC excitation voltage ratings for the 1761-L16NWB programmable controller are 14 Volts DC minimum, 24 Volts DC nominal, 26.4 Volts DC maximum at 131 degrees Fahrenheit, and 30 Volts DC maximum at 86 degrees Fahrenheit. The 1761-L16NWB programmable controller measures 120 x 40 x 80 millimeters.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1761-L16NWB

ManufacturerAllen Bradley
CategoryPLCs
Product LineMicroLogix 1000
Part Number1761-L16NWB
UPC612598283484
Weight0.94 lbs (0.43 kg)
I/O Count16 points
Input Type24V ac or 24V dc
Output TypeRelay
Power Supply24V dc
Safety FeatureMaster Control Relay
Digital Outputs6 Contact Outputs
UNSPSC32151705
Product Lifecycle Status*Discontinued/Obsolete

* The Allen Bradley 1761-L16NWB has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1761-L16NWB units instead of migration.

The Allen-Bradley 1761-L16NWB is a part of the MicroLogix 1000 family of controllers. It is a pocket-friendly programmable controller that fits in a small panel space. For communication, it has a built-in RS-232C port for DF1 protocol and Point-to-point, DH-485, DeviceNet, and EtherNet/IP communications. These communication types support direct connection, half-duplex slave protocol for SCADA applications, program upload and download, peer-to-peer communication, etc. It has more than 65 instructions for applications and it can operate in up to 5 different languages. The 1761-L16NWB controller has 16 I/O with 24V DC sink/source or 24V AC power for the 10 inputs and 6 contact outputs. It has a real input power of 5W at 24V DC., 1500V AC isolation voltage, and a 1K-word EEPROM. It has a program scan time of 2ms and an I/O scan time of 0.21ms. It has a maximum of 32 counters and 40 timers. The 1761-L16NWB controller comes with a master control relay safety feature. It is installed using a DIN rail or mounting screw with adequate spacing in the enclosure for heat dissipation. It is intended for use in a category II non-hazardous industrial environment with a 0 - 55 °C (32 - 131 °F) operating temperature and a maximum operating shock of 20g.

Revision Part #Also known as
1761-L16NWB Ser A1761-L16NWB/A, Series A, Rev A
1761-L16NWB Ser B1761-L16NWB/B, Series B, Rev B
1761-L16NWB Ser C1761-L16NWB/C, Series C, Rev C
1761-L16NWB Ser D1761-L16NWB/D, Series D, Rev D
1761-L16NWB Ser E1761-L16NWB/E, Series E, Rev E
Don't see your particular revision? Contact us now.