1761-NET-ENI is an Ethernet Interface for MicroLogix and CompactLogix devices by Allen-Bradley with DF1 Full-Duplex Protocol, RS-232 ports, and a DC Input Power. Uses RS-232 Ports. 50 Milliampere Current Draw at 24V DC. DF1 Full-Duplex Protocol.
|Warranty:||1 year DO Supply Warranty Included|
|Shipping:||Worldwide shipping via DHL, UPS, Fedex, and TNT|
|Repairs:||We offer repair service for the 1761-NET-ENI.|
|Exchange:||Exchange credit for your defective unit available.|
To Speak to a sales representative for pricing & lead time:
The Allen-Bradley 1761-NET-ENI is an Ethernet/IP communication interface. It provides connectivity for CompactLogix, MicroLogix, and SLC 500 devices, as well as other DF1 full-duplex devices. The 1761-NET-ENI has a 100 Base-T Port embedded with LEDs which allow for reliable connection to your network through any standard RJ45 Ethernet cable. These embedded LEDs provide easy-to-view links and transmit/receive statuses. It is equipped with an RS-232 port which provides isolation and will auto-baud on power-up for detecting the communications of the port setting of the controller attached to it. The 1761-NET-ENI is provided with the ability to force Ethernet to 11 Mbps or 100 Mbps and half-duplex or full-duplex where the default us auto negotiable. Configuration over Ethernet can be done with a configuration security mask provision.
The 1761-NET-ENI’s most vital feature is the diagnostic page which displays the important module information and all the Ethernet connections in use. One of the best things about the 1761-NET-ENI communication interface is that it is efficient and delivers exceptional output with less power consumption. The maximum operating temperature for the 1761-NET-ENI is 0 to 70 degrees Celsius and the maximum storage temperature is -45 to 85 degrees Celsius. The most commonly used standards are IEC801-2, 3, 4, 5, and 6. Its operating humidity is 5-95% non-condensing. The 1761-NET-ENI’s regulation, approvals, and certifications include the UL, C-UL, CE, and Class 1, Division 2 certifications; this module provides Ethernet/IP connectivity to all DF1 full-duplex devices including all MicroLogix and CompactLogix controllers. This Ethernet Interface allows you to upload or download programs, communicated between controllers and generate emails while connected to non-Ethernet controllers.
|Part Number/Catalog No.:||1761-NET-ENI|
|Safety Feature:||Master Control Relay|
|24 Volts DC Current Draw:||50 Milliamperes (Typical)|
|Item weight:||1 pound|
|Dimensions:||23 x 16 x 18 inches|
|Certifications:||IEC801-2, 3, 4, 5, and 6|
|Cable:||RJ45 Ethernet cable|
|Storage Temperature:||-45 to 85 degrees Celsius|
|Operating Temperature:||0 to 70 degrees Celsius|
Question: Do I need a master-type device to use the 1761-NET-ENI Ethernet Interface?
Answer: No, Ethernet/IP is an industry standard that allows for inter-device compatibility. Therefore, information is exchanged through a peer-to-peer relationship.
Question: What is the difference between 1761-NET-ENI and 1761-NET-ENI series B?
Answer: 1761-NET-ENI series B offers the following improvements: It uses an RSLogix 5000 and eliminates the need for two Ethernet Interfaces in a CompactLogix, ControlLogix or FlexLogix system. The 1761-NET-ENI series B is compatible with DHCP. Series B also has two new BOOTP options.
Question: Can this module be purchased with a warranty?
Answer: Yes, the 1761-NET-ENI comes with a free one-year warranty from DO Supply, Inc.
Question: Where can I send the 1761-NET-ENI to be repaired?
Answer: DO Supply, Inc. offers a variety of repair services for the 1761-NET-ENI.
Question: What is this module's Current Draw at 24 Volts?
Answer: The 1761-NET-ENI has a Current Draw of 50 Milliamperes.
Question: What kind of ports does the 1761-NET-ENI have?
Answer: The 1761-NET-ENI has an RS-232 port.