1762SC-OF8

The 1762SC-OF8 is a high-density analog output module that is manufactured by Spectrum controls. This MicroLogix compatible expansion module is an encompass partner module. It is has Eight (8) analog Voltage or Current output channels. Is modules is compatible or use with any 1762 expansion module and supports MicroLogix processor such as MicroLogix 1100/ 1200 / 1400 Programmable Logic Controllers.

Native expansion modules of Allen-Bradley, specifically, 1762 analog output modules provide up to Four (4) channels only. The 1762sc-IF8U has Eight (8) channels thus, more modulating devices maybe controlled.

Each channel of this module supports voltage or current signals. Configurable voltage signals are 0-5 V, 1-5 V, 0-10 V, ±10 V while configurable Current signals for this module are 4 to 20 mA and 0 to 20 mA. This module has a 160Bit resolution with configurable data formats of Selectable data formats; PID, Engineering Units, Raw Count, Percent of Range. The channels have settling time of <1 ms to 63% of full scale.

This module is provided with an overvoltage protection of +24VDC for one minute, output accuracy of ±20 mV at 25 °C; ±50 uA at 25 °C. It has a backplane current requirement of 30 mA at 5 V; 250 mA at 18.7 and V 195 mA at 24 V.

This module promotes cost savings as it is equivalent to Two (2) 1762-OF4 expansion module. Also, it saves an expansion module count, saving the remaining slot to accommodate other needed modules. MicroLogix 1100 supports up to Four (4) expansion modules, Six (6) for MicroLogix 1200 and Seven (7) for MicroLogix 1400.

The 1762SC-OF8 is an analog output module manufactured by Spectrum Controls. This module is MicroLogix Programmable Logic Controller (PLC) compatible. This analog output module comes with Eight (8) Voltage / Current channels. The 1762SC-OF8 is designed for installation in an industrial enclosure that has all of the proper connections to a group system in order to reduce electromagnetic interference. It is recommended to keep the module away from radiated heat and from motor drives that could cause interference on its data transfers. A space of at least 2 inches must be left on each side of the Allen-Bradley 1762SC-OF8 analog output module, to ensure adequate ventilation and heat release. If necessary, an appropriate climate control device may be installed in the enclosure. It contains a module memory map in which it will show what modules were added and their current status. The operating environmental conditions include an operating temperature of up to 60 degrees Celsius, a non-condensing relative humidity if 5 to 95%, and an altitude of 2000 meters. If some of these specifications are exceeded, there is a high possibility of damage. This module also has a maximum heat dissipation of 4.9 Kilowatts. The 1762SC-OF8 analog output module has a shipping weight of 279 grams and a height of 90 millimeters, a depth of 87 millimeters, and a width of 40 millimeters. Note that these measurements include the mounting tabs.