Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley PLC 5 1771-CX2

Product image is representative; revision or series may vary. Contact us to request a specific version.

1771-CX2

|
Need a Specific Revision?

The 1771-CX2 cable is an Allen-Bradley/Rockwell Automation local I/O bus terminal cable. It has been designed and manufactured as part of the PLC 5 series. The 1771-CX2 local I/O bus terminal cable can be used as a bus terminator for both input points and output points in PLC 5 series I/O modules. This cable is 2 meters or 6.5 feet long. The 1771-CX2 local I/O bus terminal cable is best-suited for use with the Allen-Bradley PLC 5 series 1785-L40L and 1785-L60L local I/O modules.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1771-CX2

ManufacturerAllen Bradley
CategoryPLCs
Product LinePLC 5
Part Number1771-CX2
UPC061259811540
Weight1.44 lbs (0.65 kg)
Module TypeLocal I/O Bus Terminator Cable
Length5 ft (1.5 m)
Slots1 Slot
Backplane Current1.0 Amps max
Wiring Arm1771-WN
Module Scan Time1.3-5 ms
Storage Temperature-40-185 F (-40-85 C)
CoatingConformal Coat
View as PDF
Request a Repair

The Allen-Bradley 1771-CX2 PLC-5 Local I/O Bus Terminator Cable Assembly is a 2-meter connection cable for connecting local I/O adapters in a PLC-S system. This cable is supplied with the Allen-Bradley PLC–5/40L or PLC–5/60L Programmable Controllers, and it is also supplied with the Allen-Bradley 1771–ALX Local I/O Adapter. This cable allows for easy connection of the Local I/O to the BUS module, and it can be disconnected without interrupting the bus communication from the rest of the system. The 1771-CX2 termination cable assembly can be used to connect up to 16 local I/O adapters to the system, and this cable has a dual–end connector on one end and a single–end connector on the other for two-way connection.

The 1771-CX2  dual–end connector is used for connecting to a mating connector on the adapter module, while the other single-end of the cable is connected to either a programmable controller or to the adjacent 1771–ALX Local I/O Adapter in the system. The 1771-CX2 is installed by inserting both the dual end and the single-end connector to the local I/O adapter and to the controller or the next available adapter and tightening screws, and when the last adapter in the system is connected to the system, a termination cable called the 1771–CXT is connected to the dual end connector of the adapter to terminate the connection.

Revision Part #Also known as
1771-CX2 Ser A1771-CX2/A, Series A, Rev A
Don't see your particular revision? Contact us now.