1771-HS - In Stock | Allen Bradley PLC PLC 5

1771-HS

Rated 4.9 with 8 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

1771-HS

Revisions: Ser A 
Description: The 1771-HS module is an IMC motion control module and servo controller from the Allen-Bradley/Rockwell Automation PLC 5 series. Its maximum power rating is 16.9 Watts. The 1771-HS IMC motion control module has backplane power requirements of 850 milliamps at 5 Volts DC. The ports on the front of the motion control module include an auxiliary feedback port, an ?axis estop I/O? port, an RS-232 port, and a power port. The 1771-HS IMC motion control module also has several status indicator LEDs on the front panel to let the users know if the module is powered on or off or if it is experiencing errors.
In Stock Ships Today
Request a quote for 1771-HS

Description: The 1771-HS module is an IMC motion control module and servo controller from the Allen-Bradley/Rockwell Automation PLC 5 series. Its maximum power rating is 16.9 Watts. The 1771-HS IMC motion control module has backplane power requirements of 850 milliamps at 5 Volts DC. The ports on the front of the motion control module include an auxiliary feedback port, an ?axis estop I/O? port, an RS-232 port, and a power port. The 1771-HS IMC motion control module also has several status indicator LEDs on the front panel to let the users know if the module is powered on or off or if it is experiencing errors.

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: Ser A 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1771-HS.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.9 with 8 reviews

    Technical Specifications for 1771-HS

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1771-HS
Module TypeServo Controller Module
Fuse Voltage120 Volts
Max Input Frequency250 Kilohertz Differential Input
Outputs+/- 10 Volt DC Analog Command
Slots2 Slots Per ES
Module Update Period2 ms/axis
Backplane Current1.7 Amperes
Wiring Arm1771-WB
Wiring Arm1771-WA
Pulse Capture Time50-9.999 Microseconds
Dimensions3.5 x 6.5 x 2.0 in (89 x 165 x 51 mm)
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1771-HS
Module TypeServo Controller Module
Fuse Voltage120 Volts
Max Input Frequency250 Kilohertz Differential Input
Outputs+/- 10 Volt DC Analog Command
Slots2 Slots Per ES
Module Update Period2 ms/axis
Backplane Current1.7 Amperes
Wiring Arm1771-WB
Wiring Arm1771-WA
Pulse Capture Time50-9.999 Microseconds
Dimensions3.5 x 6.5 x 2.0 in (89 x 165 x 51 mm)
s

About 1771-HS

The 1771-HS IMC 120 Motion Controller Module by Allen-Bradley is a Servo Controller module which consists of a 32-KB 1771-HM memory cartridge, a maximum of 3 servo controller modules on the I/O chassis, an Encoder module, and a power supply module (1771-PS7). The controller module has a factory pre-installed memory cartridge (1771-HM) connected to the controller module and this provides a storage memory for the whole controller module. The 1771-HS memory cartridge contains a lithium battery back-up with a rating of 3.6V and it also has a 32-KB CMOS Random Access Memory (RAM) for MML program memory. It has 4 LED light indicators (Red and Green) on the front and a power connector on the front-side for connecting to the power supply module (1771-PS7). 

The 1771-HS is shipped with a power supply module with a power rating of 120V AC at 1A and 220V AC at 2A and it uses a connector cable (1771-CAS) for connecting the power supply module to the power connector on the front-side of the module. The controller module also has an Axis Estop I/O Connector, which is a 50-pin connector for receiving encoder feedback signals, resolver feedback signals, E-stop status, and E-stop starting signals, and it provides fast I/O power. The 1771-HS has a 15-pin AUX FDBK Connector, which receives auxiliary encoder feedback signals, provides the encoder with power, and receives signals from the resolver rotor. The RS-232 connector on the front-side allows for upload and download of MML programs or the AMP parameters and it is used to debug MML programs and hardware using the Hand-Held pendant connected to it. The 1771-HS also comes with sever connector cables for connecting external devices to the controller module.



Technical Description of 1771-HS

Allen Bradley PLC 5 Servo Controller Module

Repair Services for 1771-HS

Type Lead Time Price Action
Repair Service 2-4 weeks $365cartAdd to Cart

Our highly skilled technicians can repair your 1771-HS. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for 1771-HS

Please refer to the manual for more information about the 1771-HS such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1771-HS Ser A
1771-HS/A, Series A, Rev A Request Quote
Common misspellings:
  • l771-HS
  • 177l-HS
  • 1771HS

Dimensions For 1771-HS

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1771-HS

Resolutions For 1771-HS

About

Technical Specifications for 1771-HS

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1771-HS
Module TypeServo Controller Module
Fuse Voltage120 Volts
Max Input Frequency250 Kilohertz Differential Input
Outputs+/- 10 Volt DC Analog Command
Slots2 Slots Per ES
Module Update Period2 ms/axis
Backplane Current1.7 Amperes
Wiring Arm1771-WB
Wiring Arm1771-WA
Pulse Capture Time50-9.999 Microseconds
Dimensions3.5 x 6.5 x 2.0 in (89 x 165 x 51 mm)
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1771-HS
Module TypeServo Controller Module
Fuse Voltage120 Volts
Max Input Frequency250 Kilohertz Differential Input
Outputs+/- 10 Volt DC Analog Command
Slots2 Slots Per ES
Module Update Period2 ms/axis
Backplane Current1.7 Amperes
Wiring Arm1771-WB
Wiring Arm1771-WA
Pulse Capture Time50-9.999 Microseconds
Dimensions3.5 x 6.5 x 2.0 in (89 x 165 x 51 mm)

About 1771-HS

The 1771-HS IMC 120 Motion Controller Module by Allen-Bradley is a Servo Controller module which consists of a 32-KB 1771-HM memory cartridge, a maximum of 3 servo controller modules on the I/O chassis, an Encoder module, and a power supply module (1771-PS7). The controller module has a factory pre-installed memory cartridge (1771-HM) connected to the controller module and this provides a storage memory for the whole controller module. The 1771-HS memory cartridge contains a lithium battery back-up with a rating of 3.6V and it also has a 32-KB CMOS Random Access Memory (RAM) for MML program memory. It has 4 LED light indicators (Red and Green) on the front and a power connector on the front-side for connecting to the power supply module (1771-PS7). 

The 1771-HS is shipped with a power supply module with a power rating of 120V AC at 1A and 220V AC at 2A and it uses a connector cable (1771-CAS) for connecting the power supply module to the power connector on the front-side of the module. The controller module also has an Axis Estop I/O Connector, which is a 50-pin connector for receiving encoder feedback signals, resolver feedback signals, E-stop status, and E-stop starting signals, and it provides fast I/O power. The 1771-HS has a 15-pin AUX FDBK Connector, which receives auxiliary encoder feedback signals, provides the encoder with power, and receives signals from the resolver rotor. The RS-232 connector on the front-side allows for upload and download of MML programs or the AMP parameters and it is used to debug MML programs and hardware using the Hand-Held pendant connected to it. The 1771-HS also comes with sever connector cables for connecting external devices to the controller module.



Technical Description of 1771-HS

Allen Bradley PLC 5 Servo Controller Module
Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks $365cartAdd to Cart

Our highly skilled technicians can repair your 1771-HS. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks $365cartAdd to Cart

Our highly skilled technicians can repair your 1771-HS. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the 1771-HS such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1771-HS Ser A
1771-HS/A, Series A, Rev A Request Quote

Common misspellings:
  • l771-HS
  • 177l-HS
  • 1771HS
PDF