DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Description: The 1771-IE input module is an analog input module. It is available from the Allen-Bradley/Rockwell Automation PLC 5 product line. The 1771-IE analog input module comes with 8 input channels and it is both an AC and DC input module. The AC operating voltage range for this input module is from 92 to 138 Volts AC with a maximum off-state current rating of 1.7 milliamps. Additionally, the 1771-IE analog input module?s DC operating voltage range is from 92 to 138 Volts DC with a maximum off-state current rating of 1.7 milliamps.
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Warranty: | 1 year DO Supply Warranty Included |
Shipping: | Worldwide shipping via UPS, DHL, and TNT |
Repairs: | We offer repair service for the 1771-IE. |
Exchange: | Exchange credit for your defective unit available. |
Conditions: | We sell preowned surplus and refurbished parts. |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 1771-IE |
Module Type | Analog Input Module |
Number of Inputs | 8 Inputs |
Number of Bits | 8 Bit |
AC Operating Voltage | 92-138 Volts |
DC Operating Voltage | 92-138 Volts |
Backplane Current | 74 Miliamperes |
Max AC Off-State Current | 1.7 Miliamperes |
Max DC Off-State Current | 1.7 Miliamperes |
Typical AC Signal Delay (On) | 24 (+/- 10) ms |
Typical DC Signal Delay (On) | 10 (+/- 4) ms |
Typical AC Signal Delay (Off) | 24 (+/- 10) ms |
Typical DC Signal Delay (Off) | 20 (+/- 9) ms |
Mounting | Rack Mountable |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 1771-IE |
Module Type | Analog Input Module |
Number of Inputs | 8 Inputs |
Number of Bits | 8 Bit |
AC Operating Voltage | 92-138 Volts |
DC Operating Voltage | 92-138 Volts |
Backplane Current | 74 Miliamperes |
Max AC Off-State Current | 1.7 Miliamperes |
Max DC Off-State Current | 1.7 Miliamperes |
Typical AC Signal Delay (On) | 24 (+/- 10) ms |
Typical DC Signal Delay (On) | 10 (+/- 4) ms |
Typical AC Signal Delay (Off) | 24 (+/- 10) ms |
Typical DC Signal Delay (Off) | 20 (+/- 9) ms |
Mounting | Rack Mountable |
The Allen-Bradley 1771-IE is an 8-bit Analog Input Module that measures analog signals at its inputs that are converted to 3-digit BCD values (0-255) for PC processor use. It has eight single-ended channels with the same current or voltage range. It is compatible with any PC processor using the 1771 I/O structure. It can accommodate a connection with up to eight analog sensing devices that work with variables like light intensity, temperature, pressure, and position. These devices should have outputs that conform to the current range for which the module has been calibrated.
The single-slot 1771-IE Analog Input can be inserted into any I/O slot. However, to minimize noise, try to group analog input modules together within the I/O chassis. To further optimize performance, do not place analog inputs near high voltage DC or AC modules. This module ships with the 1771-WB Field Wiring Arm. To connect devices to the module’s wiring arm, use the Belden 8761 or equivalent cable.
The 1771-IE Module features self-diagnostics. It can detect errors in data conversion and transmission as well as an accurate level of the user-supplied voltage ranging from ±15V DC and +5V DC. When an error is detected, data transfer is stopped. The operator must correct the error before restarting.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1771-IE. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Please refer to the manual for more information about the 1771-IE such as the wiring diagrams, data sheets and migration or obsolescence details.
Revision Part # | Also Known as | Availability |
1771-IE Ser 6
|
1771-IE/6, Series 6, Rev 6 | Request Quote |
1771-IE Ser A
|
1771-IE/A, Series A, Rev A | Request Quote |
Size | |
Input Type | |
Panel Cutout Height | in mm |
Panel Cutout Width | in mm |
Terminal Height | in mm |
Terminal Width | in mm |
Terminal Overall Depth | in mm |
Terminal Mounted Depth | in mm |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 1771-IE |
Module Type | Analog Input Module |
Number of Inputs | 8 Inputs |
Number of Bits | 8 Bit |
AC Operating Voltage | 92-138 Volts |
DC Operating Voltage | 92-138 Volts |
Backplane Current | 74 Miliamperes |
Max AC Off-State Current | 1.7 Miliamperes |
Max DC Off-State Current | 1.7 Miliamperes |
Typical AC Signal Delay (On) | 24 (+/- 10) ms |
Typical DC Signal Delay (On) | 10 (+/- 4) ms |
Typical AC Signal Delay (Off) | 24 (+/- 10) ms |
Typical DC Signal Delay (Off) | 20 (+/- 9) ms |
Mounting | Rack Mountable |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 1771-IE |
Module Type | Analog Input Module |
Number of Inputs | 8 Inputs |
Number of Bits | 8 Bit |
AC Operating Voltage | 92-138 Volts |
DC Operating Voltage | 92-138 Volts |
Backplane Current | 74 Miliamperes |
Max AC Off-State Current | 1.7 Miliamperes |
Max DC Off-State Current | 1.7 Miliamperes |
Typical AC Signal Delay (On) | 24 (+/- 10) ms |
Typical DC Signal Delay (On) | 10 (+/- 4) ms |
Typical AC Signal Delay (Off) | 24 (+/- 10) ms |
Typical DC Signal Delay (Off) | 20 (+/- 9) ms |
Mounting | Rack Mountable |
The Allen-Bradley 1771-IE is an 8-bit Analog Input Module that measures analog signals at its inputs that are converted to 3-digit BCD values (0-255) for PC processor use. It has eight single-ended channels with the same current or voltage range. It is compatible with any PC processor using the 1771 I/O structure. It can accommodate a connection with up to eight analog sensing devices that work with variables like light intensity, temperature, pressure, and position. These devices should have outputs that conform to the current range for which the module has been calibrated.
The single-slot 1771-IE Analog Input can be inserted into any I/O slot. However, to minimize noise, try to group analog input modules together within the I/O chassis. To further optimize performance, do not place analog inputs near high voltage DC or AC modules. This module ships with the 1771-WB Field Wiring Arm. To connect devices to the module’s wiring arm, use the Belden 8761 or equivalent cable.
The 1771-IE Module features self-diagnostics. It can detect errors in data conversion and transmission as well as an accurate level of the user-supplied voltage ranging from ±15V DC and +5V DC. When an error is detected, data transfer is stopped. The operator must correct the error before restarting.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1771-IE. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1771-IE. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Please refer to the manual for more information about the 1771-IE such as the wiring diagrams, data sheets and migration or obsolescence details.
Revision Part # | Also Known as | Availability |
1771-IE Ser 6
|
1771-IE/6, Series 6, Rev 6 | Request Quote |
1771-IE Ser A
|
1771-IE/A, Series A, Rev A | Request Quote |