DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Description: The Allen-Bradley 1771-IVN module is an input module from the PLC 5 series which can be used as a key component in a PLC 5 control system. It is compatible with all the current chassis from the Allen-Bradley Bulletin 1771 product line. The 1771-IVN input module supports half-slot addressing without any restrictions and 1-slot addressing under the right conditions, but it cannot support 2-slot addressing. It uses 32 input image bits in the data table but no output image bits. The 1771-IVN input module comes with sourcing inputs and it is meant to be used with sinking outputs.
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Warranty: | 1 year DO Supply Warranty Included |
Shipping: | Worldwide shipping via UPS, DHL, and TNT |
Repairs: | We offer repair service for the 1771-IVN. |
Exchange: | Exchange credit for your defective unit available. |
Conditions: | We sell preowned surplus and refurbished parts. |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 1771-IVN |
Module Type | Digital DC Input Module |
Number of Inputs | 32 Inputs (4 Sets of 8) |
Voltage Category | 10-60 Volts DC, Source (Sink Load) |
DC Operating Voltage | 10-30 Volts |
Backplane Current | 280 Milliamperes |
Max DC Off-State Current | 1.7 Miliamperes |
Typical DC Signal Delay (On) | 6 (+/- 2) ms (Digital Filter) |
Typical DC Signal Delay (Off) | 6 (+/- 2) ms |
Wiring Arm | 1771-WN |
Model Status | Earlier Model |
Typical AC Signal Delay (Off) | 45 (+/- 15) ms |
Typical DC Signal Delay (Off) | 50 ms |
Wiring Arm | 1771-WH |
Mounting | Rack Mountable |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 1771-IVN |
Module Type | Digital DC Input Module |
Number of Inputs | 32 Inputs (4 Sets of 8) |
Voltage Category | 10-60 Volts DC, Source (Sink Load) |
DC Operating Voltage | 10-30 Volts |
Backplane Current | 280 Milliamperes |
Max DC Off-State Current | 1.7 Miliamperes |
Typical DC Signal Delay (On) | 6 (+/- 2) ms (Digital Filter) |
Typical DC Signal Delay (Off) | 6 (+/- 2) ms |
Wiring Arm | 1771-WN |
Model Status | Earlier Model |
Typical AC Signal Delay (Off) | 45 (+/- 15) ms |
Typical DC Signal Delay (Off) | 50 ms |
Wiring Arm | 1771-WH |
Mounting | Rack Mountable |
The Allen-Bradley 1771-IVN is a PLC 5 Digital DC Input Module. It converts DC signals provided by user devices to the logic level needed by the processor. It directly controls the state of corresponding bits in the PLC data table. It provides a modular design with space-saving and pocket-friendly means to add input to a PLC control system. It has a 1771-WN wiring arm to replace the module, eliminating the need for disconnecting wiring. The 1771-IVN is a series C module and supports ½ and 1-slot I/O addressing. It has applications in Sink DC input signal termination.
The 1771-IVN module has 32 (4 sets of 8) inputs with a 10 – 60V DC Source (Sink load) voltage category. It has an operating voltage range of 10 – 30V DC. Its typical signal delay is 6ms (±2) in On-DC state and 6ms (±2) in Off-DC state. It has a maximum Off-state current of 1.7mA and a backplane current load of 280mA. It has a maximum power dissipation of 15.6W and thermal dissipation of 53.3 BTU/hr. The 1771-IVN is installed in a 1771 I/O chassis containing a PLC processor. Keying bands for putting it in the right slot is between pins 14 and 16 for the lower connector and pins 30 and 32 for the upper connector.
The 1771-IVN module has 32 status indicators for system logic side indication at the front panel. It has optoelectrical isolation for protecting the system circuits from electrical transients. The 1771-IVN also contains an input filtering feature for reducing electrical noise.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | $145 | ![]() |
Our highly skilled technicians can repair your 1771-IVN. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Please refer to the manual for more information about the 1771-IVN such as the wiring diagrams, data sheets and migration or obsolescence details.
Revision Part # | Also Known as | Availability |
1771-IVN Ser A
|
1771-IVN/A, Series A, Rev A | Request Quote |
1771-IVN Ser B
|
1771-IVN/B, Series B, Rev B | Request Quote |
1771-IVN/C, Series C, Rev C | Request Quote |
Size | |
Input Type | |
Panel Cutout Height | in mm |
Panel Cutout Width | in mm |
Terminal Height | in mm |
Terminal Width | in mm |
Terminal Overall Depth | in mm |
Terminal Mounted Depth | in mm |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 1771-IVN |
Module Type | Digital DC Input Module |
Number of Inputs | 32 Inputs (4 Sets of 8) |
Voltage Category | 10-60 Volts DC, Source (Sink Load) |
DC Operating Voltage | 10-30 Volts |
Backplane Current | 280 Milliamperes |
Max DC Off-State Current | 1.7 Miliamperes |
Typical DC Signal Delay (On) | 6 (+/- 2) ms (Digital Filter) |
Typical DC Signal Delay (Off) | 6 (+/- 2) ms |
Wiring Arm | 1771-WN |
Model Status | Earlier Model |
Typical AC Signal Delay (Off) | 45 (+/- 15) ms |
Typical DC Signal Delay (Off) | 50 ms |
Wiring Arm | 1771-WH |
Mounting | Rack Mountable |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 1771-IVN |
Module Type | Digital DC Input Module |
Number of Inputs | 32 Inputs (4 Sets of 8) |
Voltage Category | 10-60 Volts DC, Source (Sink Load) |
DC Operating Voltage | 10-30 Volts |
Backplane Current | 280 Milliamperes |
Max DC Off-State Current | 1.7 Miliamperes |
Typical DC Signal Delay (On) | 6 (+/- 2) ms (Digital Filter) |
Typical DC Signal Delay (Off) | 6 (+/- 2) ms |
Wiring Arm | 1771-WN |
Model Status | Earlier Model |
Typical AC Signal Delay (Off) | 45 (+/- 15) ms |
Typical DC Signal Delay (Off) | 50 ms |
Wiring Arm | 1771-WH |
Mounting | Rack Mountable |
The Allen-Bradley 1771-IVN is a PLC 5 Digital DC Input Module. It converts DC signals provided by user devices to the logic level needed by the processor. It directly controls the state of corresponding bits in the PLC data table. It provides a modular design with space-saving and pocket-friendly means to add input to a PLC control system. It has a 1771-WN wiring arm to replace the module, eliminating the need for disconnecting wiring. The 1771-IVN is a series C module and supports ½ and 1-slot I/O addressing. It has applications in Sink DC input signal termination.
The 1771-IVN module has 32 (4 sets of 8) inputs with a 10 – 60V DC Source (Sink load) voltage category. It has an operating voltage range of 10 – 30V DC. Its typical signal delay is 6ms (±2) in On-DC state and 6ms (±2) in Off-DC state. It has a maximum Off-state current of 1.7mA and a backplane current load of 280mA. It has a maximum power dissipation of 15.6W and thermal dissipation of 53.3 BTU/hr. The 1771-IVN is installed in a 1771 I/O chassis containing a PLC processor. Keying bands for putting it in the right slot is between pins 14 and 16 for the lower connector and pins 30 and 32 for the upper connector.
The 1771-IVN module has 32 status indicators for system logic side indication at the front panel. It has optoelectrical isolation for protecting the system circuits from electrical transients. The 1771-IVN also contains an input filtering feature for reducing electrical noise.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | $145 | ![]() |
Our highly skilled technicians can repair your 1771-IVN. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | $145 | ![]() |
Our highly skilled technicians can repair your 1771-IVN. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Please refer to the manual for more information about the 1771-IVN such as the wiring diagrams, data sheets and migration or obsolescence details.
Revision Part # | Also Known as | Availability |
1771-IVN Ser A
|
1771-IVN/A, Series A, Rev A | Request Quote |
1771-IVN Ser B
|
1771-IVN/B, Series B, Rev B | Request Quote |
1771-IVN/C, Series C, Rev C | Request Quote |